• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

PJ Club

IMG_2873.JPG
I'd love to get a number, please!

My first bass was a P/J soundgear, and I've never looked back. I have basses with other config's for diversity, but I find for my tone, a P/J is the way to go.

Here is my baby, a 1984 Ibanez Roadstar II - I refinished it and installed a Badass II - other than that, all stock.
As I said in another thread, as I've gotten other basses, I've put this one down occasionally, but whenever I come back to it, it reminds me what a Bass is supposed to sound and feel like. Still a main workhorse after many years!!
 
I'd love to get a number, please!

My first bass was a P/J soundgear, and I've never looked back. I have basses with other config's for diversity, but I find for my tone, a P/J is the way to go.

Here is my baby, a 1984 Ibanez Roadstar II - I refinished it and installed a Badass II - other than that, all stock.
As I said in another thread, as I've gotten other basses, I've put this one down occasionally, but whenever I come back to it, it reminds me what a Bass is supposed to sound and feel like. Still a main workhorse after many years!!
Really cool!

RobTheRiot #194
 
  • Like
Reactions: RobTheRiot
I guess I should update my entry here. Since I joined the Ibanez SR500 PJ left my ownership for a new and enthusiastic owner.

Much more recently I added an SX Ursa 3 MN 3TS, PJ bass to the collection.
(I've since finally swapped out the lousy OEM strings for D'Addarios)
full.jpg


Of course the Ibanez SR480 PJ has stayed put. No reason to change up a good thing!
full.jpg
 
Last edited:
View attachment 1180986 I'd love to get a number, please!

My first bass was a P/J soundgear, and I've never looked back. I have basses with other config's for diversity, but I find for my tone, a P/J is the way to go.

Here is my baby, a 1984 Ibanez Roadstar II - I refinished it and installed a Badass II - other than that, all stock.
As I said in another thread, as I've gotten other basses, I've put this one down occasionally, but whenever I come back to it, it reminds me what a Bass is supposed to sound and feel like. Still a main workhorse after many years!!
What did you do? Just sand off the finish? Also, are those stock dimarzios?
 
View attachment 1180986 I'd love to get a number, please!

My first bass was a P/J soundgear, and I've never looked back. I have basses with other config's for diversity, but I find for my tone, a P/J is the way to go.

Here is my baby, a 1984 Ibanez Roadstar II - I refinished it and installed a Badass II - other than that, all stock.
As I said in another thread, as I've gotten other basses, I've put this one down occasionally, but whenever I come back to it, it reminds me what a Bass is supposed to sound and feel like. Still a main workhorse after many years!!

My first bass was one of those, in red with a black pickguard. Great bass. Wish I had never gotten rid of it.
 
  • Like
Reactions: RobTheRiot
What did you do? Just sand off the finish? Also, are those stock dimarzios?
I refinished this so long ago, I'm trying to remember. I recently refinished one using a heat gun, but this one I'm pretty sure it was just patience and lots of sand paper & sweat! (it was originally burgundy; I just wasn't into it at the time) Then stained the front and back and painted the matte black "racing stripe" around the outside. (It's held up well considering that was my first refinish job - probably close to 1,000 shows and 10+ years, and I still love 'er!)
I'm almost positive Ibanez wasn't using Demarzio's as stock by 1984, and these are what they called their Super J4 & super P4 pickups. Perfect for the tone I prefer - big bottom, great clarity, and not too much twang out of the j. I usually just dime all the knobs & it sings!!
 
Would love a number, just ordered this hottie today!
DV016_Jpg_Large_1365435327256_A.jpg


Will take some real picks when she comes in.

The new baby on the left...
20170810_185612.jpg


And what she looked like 3 hours later (had to eat dinner first)...
20170810_214743.jpg


Added:
Hipshot Kickass bridge (Black)
Hipshot HB7 Tuners
Flat black Pickguard
Zero Mod PB1 Thumbrest
Black String retainer, pickguard scews, strap buttons, and Neck plate

Still to add:
Quarter Pounder pickups
CTS 250k Pots
.047 uF Orange Drop Cap
Mighty Mite Black input jack
Hipshot O-ring Control knobs

...Still deciding on strings... leaning towards tapewounds but not sure which ones yet.
 
Last edited:
The new babay on the left...
20170810_185612.jpg


And what she looked like 3 hours later (had to eat dinner first)...
20170810_214743.jpg


Added:
Hipshot Kickass bridge (Black)
Hipshot HB7 Tuners
Flat black Pickguard
Zero Mod PB1 Thumbrest
Black String retainer, pickguard scews, strap buttons, and Neck plate

Still to add:
Quarter Pounder pickups
CTS 250k Pots
.047 uF Orange Drop Cap
Mighty Mite Black input jack
Hipshot O-ring Control knobs

...Still deciding on strings... leaning towards tapewounds but not sure which ones yet.

That looks awesome! Btw, where did you get the black pickguard? I have the sunburst version of this bass, but want a black pickguard to match my other basses.
 
That looks awesome! Btw, where did you get the black pickguard? I have the sunburst version of this bass, but want a black pickguard to match my other basses.

It's a standard P-Bass guard that I drilled an extra hole into for the 3rd knob. they don't line up in the exact position as the origional but it's working fine for me so far.

The other option I was looking at was ordering a Warmoth pickguard with no holes drilled and then lining the original up with it and drilling all of them to match
 
  • Like
Reactions: crucislancer
The new baby on the left...
20170810_185612.jpg


And what she looked like 3 hours later (had to eat dinner first)...
20170810_214743.jpg


Added:
Hipshot Kickass bridge (Black)
Hipshot HB7 Tuners
Flat black Pickguard
Zero Mod PB1 Thumbrest
Black String retainer, pickguard scews, strap buttons, and Neck plate

Still to add:
Quarter Pounder pickups
CTS 250k Pots
.047 uF Orange Drop Cap
Mighty Mite Black input jack
Hipshot O-ring Control knobs

...Still deciding on strings... leaning towards tapewounds but not sure which ones yet.
Wow....nice ...how does the neck feels? J or p ?
 
J neck. Feels awesome. I'm still a novice player and made the mistake of getting a 5 string to learn on. So many things that I was struggling with on the 5 string just seem to come naturally on this.
Great. Enjoy it....i already went through the same 5 strings story...gave up and went back to "normal" at least for me. Thanks for your reply. Cheers
 
  • Like
Reactions: louie_b