Post Your Pedalboard - Part II

[jujube_2a]

Here's mine :
[Invalid or Expired Link Removed]
Peterson Strobostomp > MXR Bass Octave > EHX Q-Tron > Fulltone Bassdrive Mosfet Edition.
The board is a pedaltrain with Georges L's cables and ALL the pedal are powered by the Pedalpower!
Sorry for this crappy picture, I shot it with my mobile phone.

I still have room for a small sized modulation device (phaser or chorus).
Analogman Mini-Chorus is my favorite but suggestions are welcome...

 

[Phyrexian]

Nice and compact board there! How's the Peterson?

 

[jujube_2a]

I have nothing bad to say about the peterson, except that it's a little bit hight and it makes the Bassdrive hard to switch.
It's a great tuner : very accurate, fast tracking, ture bypass...

 

[Higgie]

You got rid of your AF-9 for a Q-Tron? I did the exact opposite

Also, how are you powering the Q-Tron with the PP2? It's 24v isn't it?

 

[nad]

Here's mine :
[Invalid or Expired Link Removed]
Peterson Strobostomp > MXR Bass Octave > EHX Q-Tron > Fulltone Bassdrive Mosfet Edition.
The board is a pedaltrain with Georges L's cables and ALL the pedal are powered by the Pedalpower!
Sorry for this crappy picture, I shot it with my mobile phone.

I still have room for a small sized modulation device (phaser or chorus).
Analogman Mini-Chorus is my favorite but suggestions are welcome...

I dig this board. Straight and to the point, but very effective. I would definitely get a mini Analog.man Chorus to fill that gap.

 

[jujube_2a]

You got rid of your AF-9 for a Q-Tron? I did the exact opposite

Also, how are you powering the Q-Tron with the PP2? It's 24v isn't it?

ACA outlets deliver 12,2V when normal mode is turned off.
A custom Y cable with the right connector (I had to kill the original EHX power suplly to get one) will do the jod right!

More information about the Pedal Power on the analogman website :
http://analogman.com/voodoo.htm

 

[uly_]

Ah well, a crappy cell-phone picture, but hey

[Invalid or Expired Link Removed]

The Guv'Nor has to be re-boxed ASAP! I bought it off a guitar player from my old band for like $20 lol. Also, I haven't named it! I wouldn't do such a thing to such a nice pedal.

*Sneaking around to find some nice alu-boxes*

...*and an actual board*

 

[Paddy]

Suppose I outta get round to posting my very modest pedalboard. If only to show off the Deep Impact I got off Rollo47 - man that pedal lives up to the hype

Invalid Link Removed

TU2>CEB3>OC2>Gremlin>Impact

The Gremlin is quite a cool twin filter overdrive pedal, I really like it. It's NOT distortion but puts an edge in there when I want it - [Invalid or Expired Link Removed]. In fact I think I got some review sheets Martin Owen sent me somewhere, if anyones interested PM me and I'll scan em and send em.

Chain is right to left - don't know if it's the best order but it's what I got.

 

[Anscari]

I would try like this:

tu2>gremlin>impact>octaver>chorus

 

[Higgie]

I would go Deep Impact->OC-3->Gremlin->CEB-3->TU-2

Deep Impact and OC-3 at the beginning as the synth/octavers need the cleanest sound for full efficiency and tracking, then the Gremlin as octaver/synth into overdrive sounds sweet, as well as overdrive into Chorus, so I put that after the drive...and the TU-2 at the end to mute everything.

 

[beyondhairy]

I would go Deep Impact->OC-3->Gremlin->CEB-3->TU-2

Deep Impact and OC-3 at the beginning as the synth/octavers need the cleanest sound for full efficiency and tracking, then the Gremlin as octaver/synth into overdrive sounds sweet, as well as overdrive into Chorus, so I put that after the drive...and the TU-2 at the end to mute everything.

but the TU-2 needs the cleanest signal to get the proper tunning lol, should be first

 

[TaySte_2000]

but the TU-2 needs the cleanest signal to get the proper tunning lol, should be first

If you put a TU-2 before a Deep Impact you'll know about it, the deep impact is really sensitive.

Having the TU-2 at the end of the signal chain isn't really going to affect it to much, I mean you shouldn't tune with effects before it on but you wouldn't do that anyway would you

 

[Crabby]

I dig this board. Straight and to the point, but very effective. I would definitely get a mini Analog.man Chorus to fill that gap.

Consider a Phase90 or even a Little Big Muff if you need some fuzz to go with that Bass Drive

 

[TaySte_2000]

I would go Deep Impact->OC-3->Gremlin->CEB-3->TU-2

Deep Impact and OC-3 at the beginning as the synth/octavers need the cleanest sound for full efficiency and tracking, then the Gremlin as octaver/synth into overdrive sounds sweet, as well as overdrive into Chorus, so I put that after the drive...and the TU-2 at the end to mute everything.

*cough*OC-2*cough*

 

[pepperkeenan]

, , m m, kbnjbjhbhkvkh

 

[pepperkeenan]

, , m m, kbnjbjhbhkvkh

no

 

[SpankyPants]

, , m m, kbnjbjhbhkvkh

yes

 

[SpankyPants]

yes

+1

 

[The BurgerMeister]

I have nothing bad to say about the peterson, except that it's a little bit hight and it makes the Bassdrive hard to switch.
It's a great tuner : very accurate, fast tracking, ture bypass...

why don't you put the peterson on the top row?

nice board, by the way!

 

[Hoyt]

Here's mine :
[Invalid or Expired Link Removed]
Peterson Strobostomp > MXR Bass Octave > EHX Q-Tron > Fulltone Bassdrive Mosfet Edition.
The board is a pedaltrain with Georges L's cables and ALL the pedal are powered by the Pedalpower!
Sorry for this crappy picture, I shot it with my mobile phone.

I still have room for a small sized modulation device (phaser or chorus).
Analogman Mini-Chorus is my favorite but suggestions are welcome...

I use that same exact setting on my MXR Bass Octave. Mine has cheesy rubber covered knobs though . I really dig my Boss Bass Chorus by the way. The crossover feature comes in handy to add just a touch of "sparkle" to the highs, especially cool after the envelope filter ...