Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Post your pedalboard XXI - Tequillia!
- Thread starter grygrx
- Start date
- Status
It's a Boss DC-2 clone on steroids. It's a chorus pedal with like 9 different settings. It's made by a guy on The Gear Page named John Fromel and it costs $200 or $300 custom (Sauron's custom
)Bigger pic: [Invalid or Expired Link Removed]
Changes coming to the small lunchbox side. and hopefully some boards for the other stuff in October....
Woot. I should get around to building a bigger board to house my other pedals with these before XXII 
Still the same setup. I'm pretty happy with the different sounds I get out of the muffs and the ODB but I'm seriously gassing for a multi-comp or a compulator to help center everything. Either a compressor or a blender. Iono. It's not really a financial possibility at the moment so I'm trying not to obsess.
Shoot, I was hoping to close down the last thread and be first in this one!
Anyway, here's a shot of my current board as I've outgrown the mini:
Nice to see some ToadWorks love. How do you like the Comp? I'd like to see them go back to the smaller version.
Here's Mine....
It's no change from the previous thread.
Not sure if the first one counts as a pedal board, but its my practice "area". The second is the board that goes into my rig.
no changes except i got a Marshall GV-2 and i love it!
sorry for the crummy photo
order is:
Multiplexer
Bass Squeeze
Big Muff
DOD Bass EQ
Marshall Guv'nor
Mini Qtron
Worm
CEB-3
i wanna add a delay in here, i was thinking a memory toy when ever they come out
i wanna replace the Muff with a Supercollider
one day i will get a 3leaf but for now the Qtron works, if only it had a blend control
since i only use the phaser on the worm im trying to swap it for just a phaser, check the link in my sig or PM me if you are interested
sorry for the crummy photo
order is:
Multiplexer
Bass Squeeze
Big Muff
DOD Bass EQ
Marshall Guv'nor
Mini Qtron
Worm
CEB-3
i wanna add a delay in here, i was thinking a memory toy when ever they come out
i wanna replace the Muff with a Supercollider
one day i will get a 3leaf but for now the Qtron works, if only it had a blend control
since i only use the phaser on the worm im trying to swap it for just a phaser, check the link in my sig or PM me if you are interested
In: LS-2 and TZ2
Next steps: Possibly VT Bass and JDI to replace the Para Driver. Then a Maxon CP9 Pro+ to replace the BBE. Also custom length patch cables to clean things up a bit.
It's no change from the previous thread.
James,
How's the 442 working out for you?
Submarine>OC-2>Supercollider>442 KILLS!
I've got G's old The Syle Green filter on the way and I'll post some pics when that makes its way onto my board.
my first board hasn't changed since I posted it a few threads ago...
TU2 -> Pd7 -> v8 fuzz -> boss bass chorus -> weeping demon -> valcoder -> DL8...
though thinking of replacing the DL8 with my carbon copy for delay use...
reason being, I want to make my own drum machine and bass project... just bought an alesis drum machine, have BF-2, noisebox, fuzz and distortions laying around, bought a bass synth wah and going to get a bypass/feedback dual loop pedal... my plan is use the DL8 as a looper and then use other stuff to solo on top of and make crazy noises...
not entirely sure how its going to end up... going to sell of a few pedals I never use to see what else I may need further down the track...
TU2 -> Pd7 -> v8 fuzz -> boss bass chorus -> weeping demon -> valcoder -> DL8...
though thinking of replacing the DL8 with my carbon copy for delay use...
reason being, I want to make my own drum machine and bass project... just bought an alesis drum machine, have BF-2, noisebox, fuzz and distortions laying around, bought a bass synth wah and going to get a bypass/feedback dual loop pedal... my plan is use the DL8 as a looper and then use other stuff to solo on top of and make crazy noises...
not entirely sure how its going to end up... going to sell of a few pedals I never use to see what else I may need further down the track...
unknowndude - sounds like a fun project 
I had to climb on top of my amp and wedge myself in the corner of the room up to the ceiling to take this shot.. Here's the completed setup, my first!.. for the time being. All velcro'd, power supplies mounted, wires cleaned up, 3 power chords for the whole foot pedal setup including the MP-201 and FCB101. Good times! I need to start working on a rack/stand for my computer stuff.
Im battling it out with the filters trying to decide which will get the boot for an LS-2 to take its place; the 2nd LPF is just a placeholder for the Bass Murf I sold and to be replaced by a MIDI Murf..... or leave it off, take the Grinder and Prometheus off and put the MP201 on; this fits.. but the A/B doesn't.. arg... anyway; the A/B cv switcher on the ground will most likely be velcro'd to the side of the MP201 to facilitate tap dancing subdivisions- Im just weighing my options before velcroing... Other plans ahead, but that's the deal for now.
I had to climb on top of my amp and wedge myself in the corner of the room up to the ceiling to take this shot.. Here's the completed setup, my first!.. for the time being. All velcro'd, power supplies mounted, wires cleaned up, 3 power chords for the whole foot pedal setup including the MP-201 and FCB101. Good times! I need to start working on a rack/stand for my computer stuff.
Im battling it out with the filters trying to decide which will get the boot for an LS-2 to take its place; the 2nd LPF is just a placeholder for the Bass Murf I sold and to be replaced by a MIDI Murf..... or leave it off, take the Grinder and Prometheus off and put the MP201 on; this fits.. but the A/B doesn't.. arg... anyway; the A/B cv switcher on the ground will most likely be velcro'd to the side of the MP201 to facilitate tap dancing subdivisions- Im just weighing my options before velcroing... Other plans ahead, but that's the deal for now.
Heheh, nice
I had to use a tripod to set up the camera higher than me, and I had to stand on my bed to operate it. Long boards are fun, but a pain to photograph 
Not sure if the first one counts as a pedal board, but its my practice "area". The second is the board that goes into my rig.
Nice setup Mark. You liking the squeezer?
It's a Boss DC-2 clone on steroids. It's a chorus pedal with like 9 different settings. It's made by a guy on The Gear Page named John Fromel and it costs $200 or $300 custom (Sauron's custom
Every time I look at that chorus I still think it should be some kind of disasto-facemelting-takeovertheworld-oblitoration fuzz
. That pedal is so cool. Was it $500 for the whole thing 
?
I didn't like the white knobs because i couldn't see them in the dark so much to see the settings, but i dont really use the up octave so i left it on there as i dont need to see it
Not sure if the first one counts as a pedal board, but its my practice "area". The second is the board that goes into my rig.
+1! Nice looping setup! Are you using the EHX foot controller for the 2880?
Every time I look at that chorus I still think it should be some kind of disasto-facemelting-takeovertheworld-oblitoration fuzz
Sorry about the $$ confusion. It's $200 flat for non-custom, and $100 extra for a custom finish. $300 in total.
And yes, every time I look at Sauron, I picture the most devastating, human-killing fuzz ever. But it's a lush chorus. lol
- Status
