Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Repurposing a broken Rumble 200
- Thread starter RitterSport
- Start date
That's good. When you can, though, I strongly suggest replacing that inline jack socket with a panel mounted socket. For some reason those in line ones are, as AH says, really flaky, and, even excluding the possibility of a short circuit damaging the amp, my experience is the damn things let you down at the most embarrassing possible moment. The easiest thing is probably to get a socket like this that fits from the outside:-
And then you can just take out the rubber grommet and enlarge the hole until it fits, solder the wires on the back, couple of screws and there you go.
Link Removed
And then you can just take out the rubber grommet and enlarge the hole until it fits, solder the wires on the back, couple of screws and there you go.
Link Removed
Last edited:
The wires on the speaker side are pretty stuck on, so I can really get inside the box behind the woofer.
