• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

RUSH Freewill

Great tone. What was your setup? Did you run two amps and/or effects on separate pickups? Im just starting to mess with Ric-o-Sound on my new Ric and Im always interested to hear how people are running things.

I have the Jazz Bass wired in stereo with each pickup going to their own GK MBE III combo amp. The bridge pickup has the treble cut a bit and the bass up a bit with the mids about flat with just a tad more lo-mid than hi-mid. The neck pickup has a bit more mids than the bridge but the treble and bass are the same as for the bridge pickup settings. The contour setting is around 10:30 on each amp as well. I ran the two signals post-EQ to a small Samson Mixpad 9 and then out to the VCR.

The bridge pickup is in the left channel and the neck pickup is on the right. I didn't pan them hard left/right, I left just a tad of bleed but not much so I would have good seperation.

No effects at all.
 
I have the Jazz Bass wired in stereo with each pickup going to their own GK MBE III combo amp. The bridge pickup has the treble cut a bit and the bass up a bit with the mids about flat with just a tad more lo-mid than hi-mid. The neck pickup has a bit more mids than the bridge but the treble and bass are the same as for the bridge pickup settings. The contour setting is around 10:30 on each amp as well. I ran the two signals post-EQ to a small Samson Mixpad 9 and then out to the VCR.

The bridge pickup is in the left channel and the neck pickup is on the right. I didn't pan them hard left/right, I left just a tad of bleed but not much so I would have good seperation.

No effects at all.


Dumb question here....VCR?
Stereo jack-> EQ -> Mixpad -> GK MBE's ???