Completely disassembled and cleaned every piece, at first I figured I'd dust off the bridge... then the saddles came out, then the bridge off, damn now the bridge is shiny and the tuners look grubby, hmmm, the pick ups are sitting low, lemme add some foam and reset them... i dug into the wires a bit but stopped when I remembered my solder is broken and I haven't replaced it yet. Then obviously had to redo the intonation and adjust the saddles again. Turned a 10 minute string swap into a couple hours of work.
But boy is she pretty
That’s a fun kind of work though! The Schecter I acquired in a trade needed a good cleaning, set up, string change, etc. Pickup screws were stripped and that was a good 45 minutes spent carefully getting them out with needle nose pliers.



