Yep stacked knobs…it’s not a factory option. Got the idea from @sunbeast I think.Single coil option. 3 positions on center switch. Now Blendable pickup mod???????
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Yep stacked knobs…it’s not a factory option. Got the idea from @sunbeast I think.Single coil option. 3 positions on center switch. Now Blendable pickup mod???????
I guess we had to wait for G&L to go belly up in order to get this mod on an L2x00. At least this is the first I've heard of it. I'm not much of a blend fan. I find it's better in theory than in practice. I had an MJ-4 with a blend pot from the factory. Like most blends I've used, it acted more like a switch than a pot, with about 1/8th inch of blend area either way from center detent. I tried changing pots to an MN100k, but it affected the tone negatively, so I put the MN250k factory pot back in. The only blend I've ever had that worked well was in a couple of Steinberger Synapse basses I played decades ago. Those were active basses with 25k pots.Single coil option. 3 positions on center switch. Now Blendable pickup mod???????
A couple formerly loved JB-2's. Got this 2001 (1st year for the JB-2 model. It was apparently an employee-built bass. It had a matching Cherryburst headstock and b/e maple neck. TEvidently the pickups were either swapped out for what look to me like SD singles that are too short to fill their routs.
View attachment 7351236
This 2001 was featured at the 2002 winter NAMM. You can see it on the G&L NAMM display.
Wish I'd kept it, like dozens of other G&L's.I've only been a G&L owner for about the last seven or eight years, though I'd heard about them since the late '80s. I currently own five--three Tributes and two USAs--and I've sold probably a half dozen. The only one of those I miss is a Tribute MJ-4 I had. I didn't plan to sell it, but a friend offered me $200 more than I'd paid for it, so away it went. The MJ-4 is basically a JB-2 with an M-series preamp added and noiseless 'single coils.' I normally find Cort's pickups underwhelming, but those noiseless jazz-bass-style pickups kicked some serious butt.Wish I'd kept it, like dozens of other G&L's.
Just traded for this Red 81L2000 going to meet later this evening locally here mid west here in Ohio. Looks like in decent shape back of neck has some wear not bad though. Don't have original case.
Nice!!! I really the neck binding and those swirl finishes are spectacular.Meet Gutterball, my all time favorite bass...bound, quartersawn jazz width neck, K Mod, and blendable pickups mod.
In lucious silver swirl. This is the one I'll be buried with.
View attachment 7351341View attachment 7351342View attachment 7351343View attachment 7351344

Ok,Thanks,I haven't picked it up yet. Suppose to meet with the seller in the morning to do the trade.That's not an '81. The oldest that can be is late '85 when the L2000 transitioned from front to rear mounted controls. The headstock added the eye-gouger in mid to late '83. Looks nice but as always, check the truss rod.
Ok,Thanks,I haven't picked it up yet. Suppose to meet with the seller in the morning to do the trade.
Morning,seller decided not to do the trade? Decided his L2000 was sentimental after thinking about it over night. Was not to be which is no problem,I still have my L2000 and the Lakland 44-02. Take Care!My '86 L2000 fretless was an absolute monster. Just be wary as it's already not quite what he said. I always take my allen wrenches to check the rod when doing in person deals. Best of luck.
Beautiful bass! A couple years ago, I bought a Tribute L-2500, I took it to a friend, who replaced the volume and treble pots with push / pull pots to individually switch either one or both into single coil mode. After all that, it looked worse than this, but man, what a sound.I had this L-2500 before I got the Shell Pink JB5. I got it used. It sounded magical!! The neck had been replaced by G&L, so no Serial Number bothered me a bit. 1998 Body with an early 2000s neck. The control cavity looked like a bird that shared its nest with a rat!
View attachment 7352198
View attachment 7352199
Now,that’s my kind of neck! Is the neck profile shallow?'96 G&L SB-1 with 1-11/16" nut width and Chandler pickguard.
It was made in Huntington Beach, CA the same summer I moved to Long Beach (next city over) from Chicago, at that time the only musical instrument I owned was a '92 G&L Legacy guitar.
View attachment 7345974
View attachment 7345976
Mine....I had this L-2500 before I got the Shell Pink JB5. I got it used. It sounded magical!! The neck had been replaced by G&L, so no Serial Number bothered me a bit. 1998 Body with an early 2000s neck. The control cavity looked like a bird that shared its nest with a rat!
View attachment 7352198
View attachment 7352199
Love it. Is that the one they showed on their Instagram page? I wanted that bass!!! I'd love to take the 'guard off my burst JB-5 but the screw holes bug me....
It may be... though, I found this one through UpFront Guitars. Really great group of people to work with.Love it. Is that the one they showed on their Instagram page? I wanted that bass!!! I'd love to take the 'guard off my burst JB-5 but the screw holes bug me....