• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

#3,841
pbfrog said:
I can't seem to get the Nemesis to listen to any MIDI channels other than 1. I'm sending MIDI commands to the hub on ch1, to the Mobius on ch2 and to the Nemesis on ch3. The only time that the Nemesis changes patches is if I set it to MIDI ch1. It's ignoring anything on 2 or 3.
I rewired it to be first in the MIDI chain and get the same results. It is passing through everything to the MIDI out, but it only responds to ch1 and only when ch1 is selected in the Neuro app.

Any insights?
Click to expand...
Sent a note to Brett. Will advise.
 
#3,842
pbfrog said:
I can't seem to get the Nemesis to listen to any MIDI channels other than 1. I'm sending MIDI commands to the hub on ch1, to the Mobius on ch2 and to the Nemesis on ch3. The only time that the Nemesis changes patches is if I set it to MIDI ch1. It's ignoring anything on 2 or 3.
I rewired it to be first in the MIDI chain and get the same results. It is passing through everything to the MIDI out, but it only responds to ch1 and only when ch1 is selected in the Neuro app.

Any insights?
Click to expand...

The steps for setting the MIDI channel are as follows:
-Open the app and make sure your volume is set to max.
-Connect the Neuro cable to input 2.
-Navigate to Hardware options in the app.
-Open the Input MIDI Channel control and select the channel you want.
-The small control LED on the Nemesis should blink when you send the message from the app to confirm that the message was received.
-The Nemesis should now respond to this new MIDI channel.

Give it a try and let us know how it goes. Thanks!
 
#3,843
TheSleeve said:
The steps for setting the MIDI channel are as follows:
-Open the app and make sure your volume is set to max.
-Connect the Neuro cable to input 2.
-Navigate to Hardware options in the app.
-Open the Input MIDI Channel control and select the channel you want.
-The small control LED on the Nemesis should blink when you send the message from the app to confirm that the message was received.
-The Nemesis should now respond to this new MIDI channel.

Give it a try and let us know how it goes. Thanks!
Click to expand...

Followed your instructions. The LED in the top right corner next to the MIX knob blinks when I select the MIDI channel. I select ch3 and nothing happens when I send PC messages for 1, 2, 3, 4. Same thing happens with ch2, as well. I'm positive that it's not an issue with my controller because my Mobius is set to ch2 and responds to the PC commands. I change to ch1 (blinks again) and it changes with PC messages for 2, 3, 4.

I do love the sounds that I'm getting from this, btw. Just trying to get down the control.
 
#3,844
pbfrog said:
Followed your instructions. The LED in the top right corner next to the MIX knob blinks when I select the MIDI channel. I select ch3 and nothing happens when I send PC messages for 1, 2, 3, 4. Same thing happens with ch2, as well. I'm positive that it's not an issue with my controller because my Mobius is set to ch2 and responds to the PC commands. I change to ch1 (blinks again) and it changes with PC messages for 2, 3, 4.

I do love the sounds that I'm getting from this, btw. Just trying to get down the control.
Click to expand...

Ok, I will try this out as soon as I get back to Boston. I'm visiting family out of town right now so I don't have a Nemesis with me for testing, but I'll get right on it when I'm back in the office on Monday!
 
#3,848
View media item 7831
Here's a little demo I did this afternoon with the Helix engine on the Nemesis. It's my favorite so far. Just some noodling, so please excuse the lack of a real groove. Helix makes a very spacey soundscape.

Warwick Thumb 6 string with just the Nemesis at first. At about 0:40, I add the Nano POG (in front of the Nemesis) with an octave up and down. At about 0:55, I add the Duality (between the POG and Nemesis) with a small amount of fuzz.
 
#3,858
benevan said:
While the software updates are important - I REALLY want the USB editor for the Reflex - I would much rather you focus on the product releases first like the distortions and the Solemate.
Click to expand...
Yes. That has been our priority, except the Neuro app, which is an essential component of a one series product. Especially Nemesis.
 

Latest posts

Top Bottom
Back