If we are throwing out product suggestions, a Soleman Plus with the hub built in. would make the soleman a little larger, but cut down on the pieces/wires you would have to have on your board.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Hub plus a small non-SA EXP is probably the way to go in your case.Sorcerers...
I just got a Manta and Dual Expression. The DE is just a bit too big to go on my Pedaltrain Metro 24 so it will likely have to be carried separately. Maybe if I had the soft case instead of hard case I could wedge it in there. But then I had a thought - anyone on here using the hub in conjunction with a mini expression pedal (e.g. the AMT or Hotone ones) in preference to the Dual Expression?
Source Audio, I would love to see a simple mini expression pedal, cheaper than the DE, that removes the need to buy a hub just for expression.
Or is there a way to wire a standard exp pedal up to the multi function input on the Manta?
Seems like a logical future next step. We just need to figure out how to get the jacks on the top of the Soleman.If we are throwing out product suggestions, a Soleman Plus with the hub built in. would make the soleman a little larger, but cut down on the pieces/wires you would have to have on your board.
Hub plus a small non-SA EXP is probably the way to go in your case.
On the One Series we got clever and allow for wiring up a custom small plug to work with any non-SA EXP, but on Manta it needs either the Hub or the Dual EXP. Sorry about that!
Moog EP-2 is VERY likely. They are quite standard, as I recall. Not sure about the others. "Probably" is my best answer, but the range may not be 100%.Does it work with any expression pedal? I have a Moog EP-2 and Hotone Bass Press I could put into service, but also looking at the Dunlop DVP4.
I used the Moog before I had the DE, but I much prefer the SA DE!Does it work with any expression pedal? I have a Moog EP-2 and Hotone Bass Press I could put into service, but also looking at the Dunlop DVP4.
Moog EP-2 is VERY likely. They are quite standard, as I recall. Not sure about the others. "Probably" is my best answer, but the range may not be 100%.
I haven't used the H9 but have used the Soleman since I got an early beta unit. I'm sure it's work great.Hi ..
Has anyone used the Soleman with an Eventide H9 ? If so what's been your experience ?
I beta tested with many midi pedals including the H9. It worked beautifully!Hi ..
Has anyone used the Soleman with an Eventide H9 ? If so what's been your experience ?
What are those Line6 boxes that look like Atari controllers from the 80s?
That is an impressive amount of stuff on that board, btw. I've never had the hub do what you describe.
I know this might happen if, in the next preset, you don't set the MW to bypass either on the hub software and then save the preset or if you manually save presets from the hub.Updated board.
View attachment 934220
The Hub is acting up a bit. If I hit a preset that has the Multi Wave in it, then his another that doesn't, the Hub "drags" the MWB into the next preset and I have to manually switch it off. Anyone ever seen this? It's been doing it for a while, even after firmware updates.