• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

#541
#542
mtb777 said:
Not that I know of but I need to mount my Dual ExP this week so I'll pop a screw out and see if I can determine what screws are needed to replace them with. Thanks for reminding me !
Click to expand...

OK, here is some info on the Expression Screws:
http://www.mcmaster.com/#92115a217/=rv1shn

The original screws have the following specs:
3/8" Length
6-20 Thread Size
Pan head
Type B thread forming screw for sheet metal

Our suggested new length is 1/4".
 
#545
The video link. Might be just on my phone though. I did however hit up the old tube and found it. Good, clear, concise video demonstration. While I'm here I have a question. Will there ever be a possibility with future hub updates where the midi out/thru will be able to send on another channel? I'm limited in my midi knowledge but I recently got my hub as well as a midi moose. I intended to have my bass whammy function with the thru port of the hub but since the moose only sends on one channel, each preset just sends thru to the bass whammy and well it just doesn't work the way I want it to. Basically I desire to have the whammy come on in certain modes on certain presets along with my sb2 settings. I know it's not SA product but this kinda deals with the way I want to use the hub and I figure you all still have a whammy laying around from past videos. Is this possible? Am I hoping for too much? Any suggestions? I'm stumped.
 
#547
The Dimension and DEP are here !

2867221034296110203044527768315159221408487029931n1.jpg
 
#548
masterkey_bass said:
The video link. Might be just on my phone though. I did however hit up the old tube and found it. Good, clear, concise video demonstration. While I'm here I have a question. Will there ever be a possibility with future hub updates where the midi out/thru will be able to send on another channel? I'm limited in my midi knowledge but I recently got my hub as well as a midi moose. I intended to have my bass whammy function with the thru port of the hub but since the moose only sends on one channel, each preset just sends thru to the bass whammy and well it just doesn't work the way I want it to. Basically I desire to have the whammy come on in certain modes on certain presets along with my sb2 settings. I know it's not SA product but this kinda deals with the way I want to use the hub and I figure you all still have a whammy laying around from past videos. Is this possible? Am I hoping for too much? Any suggestions? I'm stumped.
Click to expand...

I understand what you're asking about. It may be possible, but that functionality would be a complete rewrite of all the Hub's firmware, rather than an edit to it. It really comes down to the foot controller. The MIDI Moose is great, but this kind of scenario is beyond its capabilities.

Now...don't tell Roger I said this...
...but a "product" is on our agenda that just may cover this issue.
But remember...DON'T TELL ROGER! ;)
 
#550
DOSObass said:
I understand what you're asking about. It may be possible, but that functionality would be a complete rewrite of all the Hub's firmware, rather than an edit to it. It really comes down to the foot controller. The MIDI Moose is great, but this kind of scenario is beyond its capabilities.

Now...don't tell Roger I said this...
...but a "product" is on our agenda that just may cover this issue.
But remember...DON'T TELL ROGER! ;)
Click to expand...

Oooooh. Crossing my fingers for some kind og granular delay/pitch shifter! :whistle:
 
#557
ilansgroove said:
guys

the manta has a million sounds to it .... but i still couldn't find the sounds i'm trying to reach ...
can seem to make to wobble sound even close to the demos .... what are the settings you use for the HH3 reciever? the only setting i'm almost comfortable with is the red light for the led and both knobs green ....
Click to expand...

First of all, that video is AWESOME! And I like your wobble sound (well, all the sounds really)
Regarding the settings on the Hot Hand 3 and Manta:

For HH3: I use the default setting of the Hot Hand - Green Knobs, green mode light. The reason is, when the mode light is green on the Hot Hand receiver, the Depth and Smooth knobs are NOT ACTIVE. When "HH" is selected on the Manta, the "Depth" becomes the Depth knob for Hot Hand, and the "Speed" becomes the Smooth knob. With a red mode light on the Hot Hand receiver, the Depth and Smooth knobs are ACTIVE, so with the Manta in "HH" mode, you have knobs on the receiver and knobs on the pedal that are both controlling the same parameter, which can make dialing in your settings really confusing.

For the Manta: Here's my settings for the wobble sound in the demo videos:
[Invalid or Expired Link Removed]
Use the Hot Hand Wobble chart, and adjust the frequency and depth controls to your liking. I designed it with a Musicman Sterling, so it will probably be pretty accurate with your bass.

Let me know!!!
 
#558
DOSObass said:
With a red mode light on the Hot Hand receiver, the Depth and Smooth knobs are ACTIVE, so with the Manta in "HH" mode, you have knobs on the receiver and knobs on the pedal that are both controlling the same parameter, which can make dialing in your settings really confusing.
Click to expand...

you caught me just as I was playing around with it ... and I was just trying to figure it out... "why is the speed knob doing the same effect as the Depth know on the HH" heheheheheheheeh

thanks anyway

I'm going to try your settings and will report back :)
 
#559
ilansgroove said:
you caught me just as I was playing around with it ... and I was just trying to figure it out... "why is the speed knob doing the same effect as the Depth know on the HH" heheheheheheheeh

thanks anyway

I'm going to try your settings and will report back :)
Click to expand...

Cool! If you use Hot Hand with non-modulation effects, then the red mode light is the way to go.
 
Last edited:
#560
DOSObass said:
Cool! If you use Hot Hand with non-modulation effects, or 3rd party pedals, then the red mode light is the way to go.
Click to expand...

Hmm. So reading this I realize I am confused. I thought that the sensor output was NEVER processed when hooked up to a SB2 pedal through a multifunction port? I.e., so that one could have unprocessed output through the multifunction port to a SB2 pedal, and then processed output through the expression pedal to a 3rd party pedal? Which part of my thinking is wrong here?
 

Latest posts

Top Bottom
Back