• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

A big deal was made out of the fact that C4 is not polyphonic for synth tracking. I can't remember for sure, is the pitchshifting tracking different?
 
It is, but the polyphonic functions have a fair bit of latency. For polyphonic octave down functions, the Boss will likely perform better.
I should have qualified that with “not reliably polyphonic enough” to fill the needs of the poster for an always-on sub-octave. I find the poly voices on the C4 not particularly useful personally due to their latency and glitchiness, definitely not useful for bass lines. The useful sub-octaves on the C4 that would stand-in for the Boss OC-5 are all monophonic
 
  • Like
Reactions: Bassgeer
I should have qualified that with “not reliably polyphonic enough” to fill the needs of the poster for an always-on sub-octave. I find the poly voices on the C4 not particularly useful personally due to their latency and glitchiness, definitely not useful for bass lines
There are some cool uses for them though. The chorus type patches I made exploit the latency as it acts like a short delay.
 
I should have qualified that with “not reliably polyphonic enough” to fill the needs of the poster for an always-on sub-octave. I find the poly voices on the C4 not particularly useful personally due to their latency and glitchiness, definitely not useful for bass lines. The useful sub-octaves on the C4 that would stand-in for the Boss OC-5 are all monophonic

Thanks. Might have to re-add the OC-5 to my shopping list
 
I have an LA Lady inbound. Could I set it so that I can switch between two distortion engines if I have each input and its corresponding output in a different loop of my ES-5?

I haven’t tried this but I‘m pretty sure you could.

OR... you could get a neuro hub and use the ES-5’s midi capabilities to get way more than two sounds out of the LA Lady and have another loop free on the ES.
 
I haven’t tried this but I‘m pretty sure you could.

OR... you could get a neuro hub and use the ES-5’s midi capabilities to get way more than two sounds out of the LA Lady and have another loop free on the ES.
Thanks. I was thinking of doing both to be honest but the Hub will have to come later.

The more immediate restriction is that channel 1 of the LA Lady would be in a loop of a loop (like in a LS-2 loop that's in Loop 2 of the ES-5) and channel 2 of the LA Lady would be in Loop 3 for different distortion sounds
 
  • Like
Reactions: IronSpatula
Does anyone have an old smartphone attached to their pedalboard, to control the C4? If so, is there any way of powering/charging it with my 9v supply?
The ideal current for charging a phone battery is usually quite high (a lot of phone chargers provide 1-2 amps of current), so most likely anything taken directly off a 9V jack from a pedalboard supply will not provide optimal current for charging (it will still charge, but very slowly). Then you also need to convert the 9V to the correct voltage (2.5 or 5V usually). There are some supplies out there with an included USB charging port like the Cioks DC7/Eventide PowerMax that just take the power off the mains and so provide optimal current for phone charging. Any device that turns a standard pedalboard 9V output into a USB charger (like this:[Invalid or Expired Link Removed]) is probably not worth it when you could just run a separate compact extension cable (like a small 2 or 3 output one) under your pedalboard with a normal phone charger plus your power supply attached and adequately fed.