Source Audio Sorcerers Society (S.A.S.S) Part 3

[Hugsonic]

Yes. Not done it myself but have seen people on here that do. You need to save the scenes on both hubs as they will basically be independent.

 

[Quatschmacher]

If I were to want to run more than 5 SA pedals on my board with a single soleman, can I connect multiple neurohubs?

Yes. Not done it myself but have seen people on here that do. You need to save the scenes on both hubs as they will basically be independent.

Just set both hubs to the same MIDI channel, feed the midi output of one into the input of the other and press the save button on both units when saving a scene.

 

[rsmith601]

If I were to want to run more than 5 SA pedals on my board with a single soleman, can I connect multiple neurohubs?

Many people do this. No problem, as the others have noted.

 

[yberwaffe]

Is it possible to add a feature to the EQ2 ?

MIDI CC command that turn channel 1 and 2 on/off individually.
I.e. MIDI controlled channel mute.

 

[yberwaffe]

Extension to the request above.
The mute function has to happen before the router/mixer stage so it's possible to use this function with the stereo in > mono out configuration.

Something like this:
Eq > limiter > mute > mixer

 

[Gibs210]

Is it possible to add a feature to the EQ2 ?

MIDI CC command that turn channel 1 and 2 on/off individually.
I.e. MIDI controlled channel mute.

Just use the external switch option for channel swap, then use cc94 to toggle back and forth. Or use channel output CCs to control the output of either.

 

[yberwaffe]

Or use channel output CCs to control the output of either.

I don't see individual volume controls in the MIDI map, only gain acjustment +-18dB.
Might be there with the new firmware but I don't have the pedal so I can't check it myself.

 

[Quatschmacher]

@rsmith601 the Source Audio site appears to be down.

 

[Christophe C]

Hello
I tried to daisy chain my C4 and aftershock With a patch cable : phone with neuro app to C4 input 2 // C4 - output 2 to AS input 2,

problem : AS is not seen by the app. Should I use a stereo patch cable ?

thank you

 

[sunbeast]

Hello
I tried to daisy chain my C4 and aftershock With a patch cable : phone with neuro app to C4 input 2 // C4 - output 2 to AS input 2,

problem : AS is not seen by the app. Should I use a stereo patch cable ?

thank you

Yes I’m pretty sure the Neuro info goes on the ring and audio signal goes on the tip of a TRS cable. With a mono cable you are only getting the audio signal

 

[Christophe C]

Thank you. I have read again the C4 manual and you are right.

The audio source couplers are available online but the shipping costs are mad in the few European online shops that I have found. I am in Belgium... any idea where I could find them ?

these couplers are small and light enough for a normal letter

 

[yberwaffe]

Wasn't it included in the box when you bought it ?

 

[sunbeast]

Thank you. I have read again the C4 manual and you are right.

The audio source couplers are available online but the shipping costs are mad in the few European online shops that I have found. I am in Belgium... any idea where I could find them ?

these couplers are small and light enough for a normal letter

Like these? Not sure if you can order them (from China): 6.35mm 1/4" Stereo Male Plug To 6.35mm Male Coupler Audio Headphone TRS Adapter | eBay

 

[yberwaffe]

Oh, that kind. I thought it was about the adapter you connect to the phones headphone output.

 

[Christophe C]

Like these? Not sure if you can order them (from China): 6.35mm 1/4" Stereo Male Plug To 6.35mm Male Coupler Audio Headphone TRS Adapter | eBay

yes. Thank you

 

[Gibs210]

Thank you. I have read again the C4 manual and you are right.

The audio source couplers are available online but the shipping costs are mad in the few European online shops that I have found. I am in Belgium... any idea where I could find them ?

these couplers are small and light enough for a normal letter

Any TRS cable will work in in/out 2 for daisy chaining neuro data.

 

[fivestringgecko]

FINALLY found some time to finish up some patches and audio samples, TB friends! Fresh batch of presets uploaded to the Neuro Community.

Dark Tron is a modified version of the Tron preset, with a darker sound based totally on personal preferences. From there, I also added a version with some dirt, and both clean and dirty version of a down envelope sound. There's also a patch based on Les' dual tracked envelope filter sound from Tragedy's A Comin (Primus) and for Don't Start Now (Dua Lipa). All available on the Neuro Community! Hope you all enjoy!

Added to the list of patches to make: DOD FX25/DOD 440 and EHX Enigma.

Cheers!
5sg.

 

[deepestend]

FINALLY found some time to finish up some patches and audio samples, TB friends! Fresh batch of presets uploaded to the Neuro Community.

Dark Tron is a modified version of the Tron preset, with a darker sound based totally on personal preferences. From there, I also added a version with some dirt, and both clean and dirty version of a down envelope sound. There's also a patch based on Les' dual tracked envelope filter sound from Tragedy's A Comin (Primus) and for Don't Start Now (Dua Lipa). All available on the Neuro Community! Hope you all enjoy!

Added to the list of patches to make: DOD FX25/DOD 440 and EHX Enigma.

Cheers!
5sg.

These sound great. I'm going to give a few a shot tonight.

 

[fivestringgecko]

These sound great. I'm going to give a few a shot tonight.

Thanks! Hope you like them!

The usual disclaimer applies of course... You may have to adjust input/output and sensitivity to your personal gear/play style!

5sg.

 

[deepestend]

Does anyone know how to get the bass sound on this track? Possible on the spectrum? Sounds like a keyboard bass w maybe some slight octaves.