• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

#12,401
NPA(nnouncement) Thursday!
DF90D0B4-FE24-493F-B0BC-6AD9C4719420.jpeg
 
  • Like
Reactions: Farrin D, scott sinner, gregmon79 and 10 others
#12,414
jam.majors said:
Words that end with ark
words end with Ark, words end Ark, anagram of Ark
Click to expand...
It's the "Tone" 3 way switch, 1st setting "Bright", last setting Dark. Left side jacks are "Main Output", the other is "Tuner / Line Out".
As I said before, looks like an "Analog PreAmp", however...I could easily be wrong!
What's interesting with this pedal is that it's an analogue pedal with digital dials and control. Those two silver knobs are encoders. It's a multi function knob / button like the one found on the EQ2. This is the "New Hardware" pedal that we saw the guts of a few months back (before the Reflex 2 buzz). It's a very cool concept, an analogue pedal with full midi / Neuro control. It's possibly another direction for a whole batch / linage of future pedals for Source Audio.
 
Last edited:
  • Like
Reactions: Farrin D, Crawforde, Dbass35 and 1 other person
#12,418
coyoteboy said:
Sorry for mundane ?:

does the Hub offer midi bus power?
Click to expand...

I will have to check. My impulse is no, I assume I've tried it before but I can't remember. However, either way I'm not using it right now.

Derek Williams said:
I don't think so. At least, not enough power to run a bluetooth WIDI Jack.
Click to expand...

That is pretty low power so I have to assume the answer is no in general.
 
  • Like
Reactions: Derek Williams
#12,419
Disaster Area Designs' DMC.micro firmware 2.02a is now available.

Lotsa changes since 2.01a:

v2.02a
  • Added config option for bypass send ON CHANGE or ALWAYS
  • Fix issue with USB -> 5-pin MIDI thru for sysex messages only
v2.02
  • Added sysex output for C4 + other Source Audio devices to enable MIDI over 1/8" TRRS
  • Added Source Audio One Series TRRS device
  • Fixed issue with USB receive not sending out MIDI CC correctly
v2.01d:
  • Added PRESETx4 and GLOBALx4 to clock menu
v2.01c:
  • Added OLED brightness command
v2.01b:
  • reduced USB power draw to allow use with iOS devices
  • Added CH.A BASE configuration, allows user to set output MIDI channel range
  • Show MIDI channel for each device on the Device Pages
  • Preset mode bypass state is now only sent if the device needs to change
 

Latest posts

Top Bottom
Back