SPECTOR® Club - Part 65

[LimaGuy]

Just returned to the world of 15" Speakers.

Purchased a Carvin PS15-4 400W 15" 4ohm Speaker (made by Celestion)
and installed it in an old 15" cab I had hid in my garage since I was 14.

Here is my famous riff which today my wife named "Razzmatazz"

Recorded with my TC Electronic BH-250 no Toneprint or compression.
Recorded with a SM57 into Pro Tools. No after EQ or Compression.

All basses have Spector Formula 603 strings on them.

Order
1-NS-2 800 9V USA Circuit. Everything at center detent
2-NS-2 630 9V USA Circuit. Everything at center detent
3-NS4CRFM 9V Czech Circuit. Everything at center detent
4-Euro4LX TonePump Trim @30%, Bass 30% , Treble 50%

[Invalid or Expired Link Removed]

Here is a photbviously needs some cosmetic work.

 

[sumgruuvz]

ns-94 in the house of spector!! \m/

 

[grendle]

I have 2 of them and they are vol/vol

I have a question for you guys too... I'm having an issue with my SVT 810 Heritage. When I plug in my GK 1001rb and play the output is low, the speakers sound like they are farting out (technical term). when I switch the speakon to my svt 810e classic it sounds great, more volume, better tone. This is a new development as I have prefered the heritage over the classic since I got it, please help... or point me in the right direction.. thanks!

and also I'm in!
Link Removed

Sounds like either a bad connection at the cab or your hurt a speaker.

 

[grendle]

Just returned to the world of 15" Speakers.

Purchased a Carvin PS15-4 400W 15" 4ohm Speaker (made by Celestion)
and installed it in an old 15" cab I had hid in my garage since I was 14.

Here is my famous riff which today my wife named "Razzmatazz"

Recorded with my TC Electronic BH-250 no Toneprint or compression.
Recorded with a SM57 into Pro Tools. No after EQ or Compression.

All basses have Spector Formula 603 strings on them.

Order
1-NS-2 800 9V USA Circuit. Everything at center detent
2-NS-2 630 9V USA Circuit. Everything at center detent
3-NS4CRFM 9V Czech Circuit. Everything at center detent
4-Euro4LX TonePump Trim @30%, Bass 30% , Treble 50%

[Invalid or Expired Link Removed]

Here is a photbviously needs some cosmetic work.

Nice! I like #800 and the euro the best! Always the best compairo's Lima!

 

[Fat240]

Just returned to the world of 15" Speakers.

Purchased a Carvin PS15-4 400W 15" 4ohm Speaker (made by Celestion)
and installed it in an old 15" cab I had hid in my garage since I was 14.

Here is my famous riff which today my wife named "Razzmatazz"

Recorded with my TC Electronic BH-250 no Toneprint or compression.
Recorded with a SM57 into Pro Tools. No after EQ or Compression.

All basses have Spector Formula 603 strings on them.

Order
1-NS-2 800 9V USA Circuit. Everything at center detent
2-NS-2 630 9V USA Circuit. Everything at center detent
3-NS4CRFM 9V Czech Circuit. Everything at center detent
4-Euro4LX TonePump Trim @30%, Bass 30% , Treble 50%

[Invalid or Expired Link Removed]

Here is a photbviously needs some cosmetic work.

Cool comparisons Sam, I go for 2,1,3,4

 

[NOLA Bass]

Since the cover band is on a rather permanent hiatus, I thought I'd show my refin Euro 4LX a little love here at least with an old pic. It has been rather neglected lately.

 

[Basstovsky]

I swear to god I'm going to take a new family photo to include the new aquisition. I must be getting lazy, last family photo was in the snowy winter and we're in the middle of summer now.

 

[johnsonabq]

Since the cover band is on a rather permanent hiatus, I thought I'd show my refin Euro 4LX a little love here at least with an old pic. It has been rather neglected lately.

Oh this is special!

 

[Wolf Tower 5]

In with my ZeBop with18v up grade. Need a new family pic with the Zebop and the legend together.

 

[Wolf Tower 5]

In with Litebrite Bop

If I didn't love the zebra wood on my ReBop as much as I do, I would totally dig on that paint. Pure awesome beauty. Love it.

 

[superdick2112]

IN.

No pics this time - same 4 killer Spector basses...

Just got back from the Rush Clockwork Angles concert...

Probably the best of the 19 Rush shows I've seen over the past 30 years...

 

[Rpratley]

In with some photos of me, my Spectors and the Master.

And my Former NS-2JJ Redwood finally made it safely to it's new owner in New Zealand.

Thanks for sending it off to its new home. Its been a long two weeks but well worth the wait.
..I'm pretty sure it's the only one in NZ, and will be well taken care off my friend...

 

[Splods]

Just realized my humble performer is something of an oddity.

I was doing a little research, and I found out that the original line of Indonesian performers had one piece maple necks with fender style bridges. The new ones have 5 piece necks, and a higher mass bridge on them.

My bass is some sort of transitional bass then, because it has the newer bridge on it and the older neck.

I doubt it has any affect on its rarity though.

 

[thisSNsucks]

In with a shot of the curves of my old Brooklyn.

 

[LagBox]

What material nut did the NS2-A come with? Mine has a plastic/synthetic bone nut (Tusq?) but I see some with a brass nut too.

 

[Mr.Bassie720]

In with, in my opinion, one of the most underrated Spectors. NS-2JA-R. Currently rocking an Aguilar OBP-2. Waiting on that magical day when PJ Rubal tells me that he has shipped me a HAZ circuit. Yeah I said HAZ. I'm not saying Spector US 9 volt circuit until they send me one.

 

[Clearwave]

What material nut did the NS2-A come with? Mine has a plastic/synthetic bone nut (Tusq?) but I see some with a brass nut too.

Plastic. Lot of people upgrade to a brass nut.

 

[Clearwave]

in

 

[AdamR]

Love this one !

 

[AdamR]

Just wondering how everyone has their Tone Pump set ? I think I need to back mine off a bit. Im over loading the input on my 800RB no matter were I set the input volume.