• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

TC RH450 Club

Ok, so here's an issue I have regarding EQ settings.

Question for you question, peledog...have you tried the BGM "flat" settings?

RH450_Optimum_Flat_Settings.jpg
 
Count me in as a new RH450 owner.

Very happy.
I can't believe how loud this thing is.
It seriously can get annoyingly, ear thumpingly loud.

The range of sounds you can get is also astounding.
I am used to amps having their one main sound, but this thing has some big varieties in it.

Good stuff.
 
digest and forward...

Reaper=1
Eublet=2
A J Brown=3
John Wentzien=4
J-Razz=5
LM Bass=6
dkb=7
mcnach8
KJung=9
onkelpo=10
Legion=11
oddio=12
Petersland=13
wraithwrider=14
fisheadjoe=15
drpepper=16
mingusbass=17
Sparks 55=18
Musicman20=19
jackANSI=20
Freddels=21
gnuv=22
fazzoes=23
coedvette=24
Lizzy D =25
James E=26
Addlepate=27
leehoop=28
tifftunes=29
stflbn=30
bassmanjla=31
Baird6869=32
joeykun=33
caw=34
Jam119=35
nervous=36
hogbog=37
Steve Clark=38
dimetech=39
petey=40
SharkUSMC=41
Ivan M=42
Ron Plichta=43
mjdyson=44
ms502arc=45
walkingUpright=46
frankie5string=47
antonismbass=48
TheShape101=49
jkramer5=50
jeliot=51
peledog=52
vin*tone=53
Tieiririyi=54
arai=55
Gregor69=56
4-string=57
madinventions=58
slawie=59
badboyb=60
Menno=61
parapentep70=62
pauliebass=63
dustinfennessey=64
badboyb=65
fretno=66
major10th=67
 
Hello everyone! Brand new to these forums :) I recently tested out some TC Electronic amps and cabs and was so blown away that I sold all my previous rigs and purchased two TC Amps (450 and a Staccato(got a great deal) and two 2x10 cabs. One for gigs and one for practice. I use Modulus basses.

This is the happiest I've ever been with rig. The sound is great, the cabs are uber responsive, and i can get my whole rig in the doors in one trip with no strain at all.

One thing I have noticed is that it clips at pretty low gain levels. I followed the manual for set up and increased the gain until it clipped and then turned it down a notch (before even turning up the master volume).

As of right now the gain is set a little bit below 9 o'clock (1/4) and it still clips on a regular basis. All of the frequencies are defaulted to the neutral position. I don't know if I'm doing anything wrong, but I've never had this issue before.

Am I doing anything wrong? Is there anything I can do? I'm having the same issue on the Staccato and the 450. Any ideas are appreciated :)

Thanks,
Dustin
 
As of right now the gain is set a little bit below 9 o'clock (1/4) and it still clips on a regular basis. All of the frequencies are defaulted to the neutral position. I don't know if I'm doing anything wrong, but I've never had this issue before.

Am I doing anything wrong? Is there anything I can do? I'm having the same issue on the Staccato and the 450. Any ideas are appreciated :)

Nothing wrong, I imagine your basses just have pretty high preamp outputs. My EUB is the same, and I have the gain similarly set. Just think of it has having plenty left for anytime you need to use a lower-output bass. If you're clipping with most strikes of the string, even back it off a little more.