• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Acoustic Club

I finally got around to finishing up the repairs on the inside of my 150b :thumbsup:

View attachment 4965961






......now I'm looking for some parts for the outside.

Specifically, cab corners.

I noticed in this thread, several years ago, a couple of members had found some from Fliptops......can any of you verify if these -

Corner 2 Prong Small for Vintage Ampegs - Product Details

- are the correct ones?




Thanks :)
Yup, these R them! They are perfect but the screw nails aren't, they are thinner I glued in hard wood dowels with wood glue before using them, once done they look great! Have fun and enjoy!
 
Yup, these R them! They are perfect but the screw nails aren't, they are thinner I glued in hard wood dowels with wood glue before using them, once done they look great! Have fun and enjoy!


I had a few that would work, but most of the wood-holes were too large - I used a similar method to yours to resolve :thumbsup:

20230217_085744.jpg








:)
 
Yup,
Opened up craigslist and there it was about 30 miles from me. What cab did most people buy when they bought this amp?

For bass the 470 and 450 were marketed sitting on top of a 406 Narrow 2x15 cabinet, but any reasonably efficient cabinet should do. It's rated for 2, 4 or 8-ohm loads, I'd say 4 ohms would be best. I've often said here that the 470 is probably my favorite sounding Acoustic amp, seeing your pics showing one in nearly showroom condition with its original footswitch made my heart flutter.
 
For bass the 470 and 450 were marketed sitting on top of a 406 Narrow 2x15 cabinet, but any reasonably efficient cabinet should do. It's rated for 2, 4 or 8-ohm loads, I'd say 4 ohms would be best. I've often said here that the 470 is probably my favorite sounding Acoustic amp, seeing your pics showing one in nearly showroom condition with its original footswitch made my heart flutter.
I would love a 470 in that condition! I would use both channels for a pseudo Ric-O-Sound!
 
  • Like
Reactions: JacklegBass
There's not much for sale right now anywhere near me except for two different 402 cabs. One has the original drivers and the other is unloaded, just the cab.
I think the amp sounds great through my GK neo. I'd just love to pair it with something from the same era in 4 ohm.
 
Last edited:
I probably should have mentioned that the drivers in that 402 if original are essentially identical to the ones used in the older 406 Narrow and 406 Wide cabinets. The only significant difference was a change of magnet material from alnico to ceramic over the course of production, but otherwise roughly the same. I would think that the efficiency and tone of the 402 and 406 would be very similar.
 
So last night I went out to AC to catch The Killers in concert. The opening band was this cool glam rock act called The Lemon Twigs, who were real good. Got a shot of their bass player. P-Bass through a vintage Acoustic 150B and I think through a 2x15, couldn't see.

View attachment 5001965 View attachment 5001966 View attachment 5001967
That was my setup in my first real band, The Reef Aires.

It belonged to the lead guitar player. All I had access to was a B-15 back then so this was my first big amp to play through. I miss that thing.

:)