• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Les Paul Twins

Very nice job on the headstock binding! That’s giving me fits right now on a Ric headstock, is it easier to get tight bends like that with multiple laminations? I’m trying to bend a single layer of .060” binding with heat- badly! Maybe I’d be better off with three layers of .020”?
 
  • Like
Reactions: GonePlaid
I bent those cold and it was reasonably straightforward, I needed to sand the bottom edge before gluing to the headstock. That's the first time I've bound a headstock so it's new territory for me, the last time I bound I uses a 2.5mm binding about the .060" and I did that in the solid with a heatgun but that was on a Jazz type body so not so tight but still a bit of a job compared to this
 
Not much of an update today, I have a sore foot, not quite sure what I've done but probably a pulled tendon, I had to give up working today because it was hurting too much to stand on. I'll get it sorted at the hospital tomorrow, going to a gig tonight and I don't want to risk missing that LOL

So I cleaned up and scraped the binding and sided of one of the bodies and that's looking good. I had hoped to get both done as well as the holes for the jack sockets drilled and the jack plates rebated flush but that is going to have to wait until I can get back on my feet. No pics today, I forgot my phone and it hurt too much to walk back into the house to get it, so next time.
 
Just back from the hospital with my foot, I've torn a tendon so it's feet up time for a while. Well time to start planning my next builds, a pair of non identical (I think) Thunderbirds, or should I call them FireDragons?

Definitively "FireDragons". Then you can claim the title "Mother of dragons". :D You have to make three of them, though. One with blue dot inlays. :nailbiting:

/Nerdmode ;)


Hope you have a speedy recovery! :)
 
It was a lovely day here so I hobbled out into the garden and decided to do what I could with bits on my knee, which wasn't much but still it all helps.

I finish sanded the faces of both headstocks and sprayed them with nitro sanding sealer from a rattle can, I couldn't have got my spray gear out to save my life but that is fine. After a couple of coats I glued the fret boards on. Finally I pulled the tape off the second body and scraped the top of the bindings flush. I have already fully scrapped the first but I couldn't do the second as I would need to have the body secured in a vice and that means standing and I can't do that.,

That's me now until after the weekend I suspect, we're off out on Friday until Saturday so maybe Sunday depending on how I feel

IMG_5137.jpg

IMG_5140.jpg

IMG_5138.jpg

IMG_5139.jpg
 
It was a lovely day here so I hobbled out into the garden and decided to do what I could with bits on my knee, which wasn't much but still it all helps.

I finish sanded the faces of both headstocks and sprayed them with nitro sanding sealer from a rattle can, I couldn't have got my spray gear out to save my life but that is fine. After a couple of coats I glued the fret boards on. Finally I pulled the tape off the second body and scraped the top of the bindings flush. I have already fully scrapped the first but I couldn't do the second as I would need to have the body secured in a vice and that means standing and I can't do that.,

That's me now until after the weekend I suspect, we're off out on Friday until Saturday so maybe Sunday depending on how I feel

View attachment 3093376
View attachment 3093377
View attachment 3093379
View attachment 3093382
Holy Sh11t! How cool!!
 

Latest posts