• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Soundgear Club

according to the catalogs, i've only found a few models listed with mahogany/bubinga necks: SR740, SR840, SR800 (00-03 painted), SR900 (94-97)

where did you find the contact info for ibanez? they seem to be quick and thorough in their responses.
This guy [email protected] has been very helpful and prompt.
as are yourself !
learning lots today graćias señor
 
Chromes solved my string GAS. Love them on all three of my Soundgears.

Just got the chromes in. Holy smokes, what a difference. I was starting to regret my decision with the zippy rounds they had on there. The chromes are deeeep, easy to play, but still sound great with a pick and slap (not that I ever slap). Thanks for the recommendation.
 
Hanging with these SR's earlier today...

99071029-B380-4826-82FC-7255C37BDAE8_zpsbil9thgd.jpg
 
I was thinking the same thing , was going between a 1305 and a 1405, but then I saw a 1405 in real life (a red one, maybe a2014) and the finish is nowhere near as glossy as it looks in most pics, so I went with a Sweetwater special 1305 with the black hardware. Should be here early April.

I also was thinking about refinishing it,aybe adding a slight tint so it doesn't look like wood straight off the shelf from Lowe's. let me know if you end up doing it.

To piggyback on this conversation, I'm exactly in the same spot. A Sweetwater special SR1305 vs a blue (preowned, like new) sr1405. Both would cost around the same. Love the blue but would the matte finish scratch or get that nasty finger shine easy?
 
I would love to hear that :D. What do you think the difference is between that and the stock electronics?

Well I've installed a lot of preamps and pickup systems over the years, cause of our lack of technicians in my country (I live in Greenland), so I have seen a lot of insides on basses. But I would first of all say that the NOLL preamp was very easy to install and was very well made. Klaus Noll does most of the Work for you, before he ships out the preamp and the customer service from his side is just spot on. He is the only one that answers you and he ships out very quickly.
The stock Electronics in the ibanez was allright. It seemed like cheaply made asian Electronics and that kinda came through in the sound also. (Just my opinion) On the other hand, the Nordstrand big single pickups are very nicely made and they have a very good sound, just a bit bummed about the preamp kinda ruining it for the pickups.
I do plan on using the Nordstrand pickups for a SR300 model if they decide to change the new import rules on rosewood.
But the playability on the bass is just fantastic and the way the bass is made is just really good, so an upgrade on the Electronics is minor ;) My NOLL preamp is a 4 band and by some reason he really has some really good low prices for his preamps, compared to preamps like the flexcore and John East. (Cost twice as much)
 
  • Like
Reactions: timplog
Just got this beast a couple of days ago, finally after a long wait cause of those damn new rules on rosewood. What can I say, love the bass!! Already upgraded it with Aguilar super doubles and a NOLL 4 band preamp ❤️ Holy smokes!

A green bass in Greenland!
 
  • Like
Reactions: JitsuBassist
Well I've installed a lot of preamps and pickup systems over the years, cause of our lack of technicians in my country (I live in Greenland), so I have seen a lot of insides on basses. But I would first of all say that the NOLL preamp was very easy to install and was very well made. Klaus Noll does most of the Work for you, before he ships out the preamp and the customer service from his side is just spot on. He is the only one that answers you and he ships out very quickly.
The stock Electronics in the ibanez was allright. It seemed like cheaply made asian Electronics and that kinda came through in the sound also. (Just my opinion) On the other hand, the Nordstrand big single pickups are very nicely made and they have a very good sound, just a bit bummed about the preamp kinda ruining it for the pickups.
I do plan on using the Nordstrand pickups for a SR300 model if they decide to change the new import rules on rosewood.
But the playability on the bass is just fantastic and the way the bass is made is just really good, so an upgrade on the Electronics is minor ;) My NOLL preamp is a 4 band and by some reason he really has some really good low prices for his preamps, compared to preamps like the flexcore and John East. (Cost twice as much)

Interesting. I'm going to look into the NOLL, I have two problems with the bass's stock electronics, 1. I wish the passive tone control's cutoff was lower, so that I can roll off right down to the fundamental. My best guess is that the stock electronics rolls off at around 450hz. And I think there's a bid of a dip in the upper mids, in general, so I like the idea of having 2 mid controls. Also ,How did you configured the two toggles on the bass with your setup? still a mid switch?
 
That beast has been on my G.A.S. list (4 stringed version) for some time now. Can't resist that beautiful poplar top burl!! How's the finish on it??

I have the 4 string version - SR650PBAM, which I swapped out the gold hardware for black:

5C31EABF-663B-4000-BA2B-5D6A278FB69B_zpsegrnyoaw.jpg


They just shipped the 655 today from Alaska, so it should be here on Friday.
 
I have the 4 string version - SR650PBAM, which I swapped out the gold hardware for black:

5C31EABF-663B-4000-BA2B-5D6A278FB69B_zpsegrnyoaw.jpg


They just shipped the 655 today from Alaska, so it should be here on Friday.
That's really beautiful man! Really wanted to get another SR model, just totally paralyzed from the new CITES rules on rosewood, so THOMANN won't ship it to my country.
That poplar burl is just really beautiful. Always wanted at least one bass in my arsenal to be with a burl of some kind!
What better than a SR with a burl :D
 
  • Like
Reactions: Basehead
Interesting. I'm going to look into the NOLL, I have two problems with the bass's stock electronics, 1. I wish the passive tone control's cutoff was lower, so that I can roll off right down to the fundamental. My best guess is that the stock electronics rolls off at around 450hz. And I think there's a bid of a dip in the upper mids, in general, so I like the idea of having 2 mid controls. Also ,How did you configured the two toggles on the bass with your setup? still a mid switch?

Can't say enough good stuff about the NOLL. The cool thing about it is that the preamp goes on a 9 volt battery, which is much appreciated with the limited space in the cavity, when the old preamp only ran on a 9 volt also.
And yeah it's nice to be able to shift between the 2 mids. (High and low).
And my volume is stacked with a passive tone control, which enables you to get an even wider sound spectrum from the pickups.
At the moment I only have 1 switch, which is an active/passive switch. It was meant to have another switch for coil tapping, but the super doubles isn't able to be switched as they are wired in series. (I originally wanted parallel wired Nordstrands)
But man is it an awesome combination of preamp and pickups. It gave me exactly the sound I wanted.
 
Found this SR655PB on Reverb this evening and jumped on it (since the price was right!):

Ibanez%20SR655PB%20-%20Body_zpsiwc7hnty.png


This has been on my G.A.S. list for a while. I plan on swapping out the gold hardware for black and upgrading the electronics.
Ooo that's a nice one! Weird thing about the "blue moon" color, if you're under a uv/blacklight it turns into this murky swamp green, which also looks pretty cool.
Definitely ditch the stock mk1 preamp, it sounds like a cardboard box! I'm still deciding on one for mine.
IMG_20130501_170854.jpg
 
  • Like
Reactions: Basehead