The Sushi Box FX Secret Society

[Grassmaster]

Yeah it'll happen eventually. Not sure when I'll have time to do it though.

View attachment 7049697

3 toobs!!!

 

[Sushi Box FX]

View attachment 7051383
I sent you a pm as well but the inside of the glass butterfly is so good looking i thought I'd share with the group as well.

That needs the power ground fix. It will help immensely.

This was designed after "the fix" became standard. If there's a single diode (little black rectangle thing) in line with the power wire instead of four diodes close together, then it already has the fix. The nine smaller diodes down by the rotary switch are for routing address signals and are unrelated to the power input.

 

[Sushi Box FX]

3 toobs!!!

Toobs = good

More toobs = more good

 

[DDR]

Yes and that's why I told you that it's designed for bass. You asked a question, I gave you an answer.
Would you like more details? Here you go: the WBIM version has the WBIM graphics and 12AU7 tube instead of a 12AX7, which means it doesn't distort as much.

I just thought you might have read the thread that's all

 

[jbybj]

This was designed after "the fix" became standard. If there's a single diode (little black rectangle thing) in line with the power wire instead of four diodes close together, then it already has the fix. The nine smaller diodes down by the rotary switch are for routing address signals and are unrelated to the power input.

Sorry……. I was sure I had this right.

 

[Sushi Box FX]

Finally is out of stock for now, and instead of building more units to have in stock I decided to go apple picking with the family for the day then come home and watch movies. One of the main reasons I can't do this full time is that I'll have a day every now and then where I just don't feel like working. Maybe I'll feel more pedaly (an actual adjective) tomorrow.

Loads of cool stuff in the pipes though, super excited about SBVT II, Grand Slampegg, Furthermore, and a couple more things I'm working on with a couple really cool people and will have more details when things are a bit more tangible.

 

[AEAbass]

Finally is out of stock for now, and instead of building more units to have in stock I decided to go apple picking with the family for the day then come home and watch movies. One of the main reasons I can't do this full time is that I'll have a day every now and then where I just don't feel like working. Maybe I'll feel more pedaly (an actual adjective) tomorrow.

Loads of cool stuff in the pipes though, super excited about SBVT II, Grand Slampegg, Furthermore, and a couple more things I'm working on with a couple really cool people and will have more details when things are a bit more tangible.

sbvt ii and grand slampegg are self explanatory but I couldn't find any info on the furthermore. Sorry I have scoured the thread but couldn't find it. What's it all about?

 

[Sushi Box FX]

sbvt ii and grand slampegg are self explanatory but I couldn't find any info on the furthermore. Sorry I have scoured the thread but couldn't find it. What's it all about?

It's been slowly in the works for a couple years now. It's an original design clean preamp, using More as a starting point, with a three-band EQ similar to the SBVT, complete with switchable mids frequencies. Furthermore also has a variable frequency high-pass-filter, D.I. output, and headphone output with line-in.

 

[andare]

Finally is out of stock for now, and instead of building more units to have in stock I decided to go apple picking with the family for the day then come home and watch movies. One of the main reasons I can't do this full time is that I'll have a day every now and then where I just don't feel like working. Maybe I'll feel more pedaly (an actual adjective) tomorrow.

Loads of cool stuff in the pipes though, super excited about SBVT II, Grand Slampegg, Furthermore, and a couple more things I'm working on with a couple really cool people and will have more details when things are a bit more tangible.

So the WBIM-less enclosures are sold out?

 

[JackFawkes]

So the WBIM-less enclosures are sold out?

Only for the moment. Sounds like he still has more of the enclosures from that batch that was accidentally missing the WBIM logo; he just hasn't sat down to assemble the guts into them and is instead enjoying a well deserved weekend off with the family.

 

[bassbrad]

Finally is out of stock for now, and instead of building more units to have in stock I decided to go apple picking with the family for the day then come home and watch movies. One of the main reasons I can't do this full time is that I'll have a day every now and then where I just don't feel like working. Maybe I'll feel more pedaly (an actual adjective) tomorrow.

Loads of cool stuff in the pipes though, super excited about SBVT II, Grand Slampegg, Furthermore, and a couple more things I'm working on with a couple really cool people and will have more details when things are a bit more tangible.

I am likely speaking for the class in supporting your need for a day off, mental [in]sanity and especially family time as being more important than your side hustle we enjoy so much. Enjoy your day.

 

[Sushi Box FX]

So the WBIM-less enclosures are sold out?

@JackFawkes nailed it, I have about a dozen left and I have parts on hand to build the pedals up, I just haven't sat down and done it yet. I'm planning it for tonight.

 

[SeoulFul]

It's been slowly in the works for a couple years now. It's an original design clean preamp, using More as a starting point, with a three-band EQ similar to the SBVT, complete with switchable mids frequencies. Furthermore also has a variable frequency high-pass-filter, D.I. output, and headphone output with line-in.

Are the enclosure sizes finalized? Curious to know how what the sizes will be for these 3.

 

[Sushi Box FX]

Are the enclosure sizes finalized? Curious to know how what the sizes will be for these 3.

SBVT II - 145 X 121 X 39.5mm (5.7" x 4.8" x 1.6"), same as Dreamcatcher, Detective

Furthermore - 145 X 121 X 39.5mm (5.7" x 4.8" x 1.6"), same as Dreamcatcher, Detective

Grand Slampegg - 120mm x 94mm x 38mm (4.7" x 3.7" x 1.5"), same length and width as JC Emerald, Black Eye II and Venus Z, but a little taller, and being used in "portrait" orientation to accommodate the tall tube.

 

[VegasGutPlucker]

I still wish for an Fdeck3 smashed with a More. Phase switch, fixed and sweepable 12db/oct HPF, 10 MegOhms / 100 pF input impedance, and TOOB. XLR DI out would be sweet too, not necessary, but while we're dreaming...

What is the impedance of a circa 2022 More, btw?

 

[Feral]

The Tarantula Fuzz showed up today, so I tossed it on my test board where I've been A/B'ing different fuzz, octave fuzz and preamp/DI pedals for a new song my band is tracking next month. I've only had one other real germanium pedal, and it definitely has that character going. Sounds like an angry hornet nest in a bottle when you crank up that tone . It's especially awesome pushing either, or even both, of the octave fuzzes on my board into it.

Very nice @Sushi Box FX!

 

[VegasGutPlucker]

Depends on which version you have. Historically they've always been 1Mohm unless someone specifically requested a modification for higher. The current version with film caps and soft switching have a couple minor changes, including increasing input impedance to 5.6Mohm. I also lowered the frequency response to start tapering at 25Hz instead of 40-ish Hz because of the comments I received that it felt like a noticeable HPF.

found my answer from several weeks ago. is this something that can be 'upgraded' for my MORE? my guess is no, it would have to be a complete circuit swap.

 

[Sushi Box FX]

found my answer from several weeks ago. is this something that can be 'upgraded' for my MORE? my guess is no, it would have to be a complete circuit swap.

Input impedance is a simple component swap, it's absolutely changeable without swapping the circuit board.

 

[Ejtibbetts]

I made it to the club

 

[Sushi Box FX]

Well after a busy day of home projects with the wife I still didn't really feel like building tonight. Me and the kids started on our ambitious halloween project though, excited to see how this turns out.

I didn't notice it at the time, but looking at these pictures I'm seeing that I literally pushed Finally v3 prototype circuit boards out of the way to work on this