The Sushi Box FX Secret Society

[Pedalnetics]

Anodized Aluminum Knob - "The Magpie" - 1/4" Smooth Shaft (12.5mm OD)

Yup, those are what I assumed it was but wanted to be sure; sounds like we both agree

*once sushi 100% confirms, I'll add it to the FAQ so ya'll can go aftermarket knob-crazy

 

[DirtyDuke]

If you’ve read any of my other posts, you’d know the answers to those questions. You’d also know I’ve never had anything but good things to say about either Broughton pedals or Sushi Box (heck, Josh actually “liked” the post that you’re getting all defensive about). Regardless, I don’t feel I need to further explain myself.

Cool. It's sounded like people only buy Broughton due to the name. My comment was you can buy based on the name Broughton and Sushi as niether makes crap pedals.

Thanks for clarifying.

 

[Pedalnetics]

Here's a sneak peek at fractured cherry with a clear-coat gloss, and also what happens when the laser is slightly misaligned. The laser only removes the coating (not etched into the metal itself), so Nathan gets to sand the enclosure back to bare and start over (or just start over with a new enclosure).

 

[shaggy45]

Awesome. Kind of reminds me of candy red vein which is one of my favorite finishes ever.

I have a couple of boxes in candy red vein for future projects and they look stunning in person. Hard to capture in a picture.

 

[shaggy45]

Better pic

 

[Pedalnetics]

Better pic View attachment 4062167

Wow that is pretty similar. Your dark spots are more prevalent so it darkens the overall look at bit more, and it looks a bit more textured. Wonder what that paint/coating process is like.

 

[shaggy45]

Wow that is pretty similar. Your dark spots are more prevalent so it darkens the overall look at bit more, and it looks a bit more textured. Wonder what that paint/coating process is like.

It’s hard to capture how dark it looks away from the light. It’s a sexy finish for sure.

 

[Pedalnetics]

It’s hard to capture how dark it looks away from the light. It’s a sexy finish for sure.

MonarchEnclosures on Etsy has some pretty cool dipped enclosures; they're usually my go-to for one-off stuff:

 

[shaggy45]

I did this one with sharpies and alcohol:

 

[Pedalnetics]

I did this one with sharpies and alcohol:

View attachment 4062176

View attachment 4062177

Wow...I didn't even know that was a thing, and that is fricking gorgeous.

 

[BunchyMutt]

I did this one with sharpies and alcohol:

View attachment 4062176

View attachment 4062177

what did you use for a sealer?

 

[shaggy45]

what did you use for a sealer?

Flex seal.



just kidding, Rust-Oleum 1906830 Lacquer Spray

 

[Pedalnetics]

Flex seal.



just kidding, Rust-Oleum 1906830 Lacquer Spray

 

[BunchyMutt]

Flex seal.

 

[Pedalnetics]

View attachment 4062198

 

[donahue]

Here's a sneak peek at fractured cherry with a clear-coat gloss, and also what happens when the laser is slightly misaligned. The laser only removes the coating (not etched into the metal itself), so Nathan gets to sand the enclosure back to bare and start over (or just start over with a new enclosure).
View attachment 4062153

Or just sell the whole thing to me as a blem

 

[Eadger]

I did this one with sharpies and alcohol:

View attachment 4062176

View attachment 4062177

That’s WAY better than anything I could possibly make with sharpies after alcohol.

 

[Sushi Box FX]

Anodized Aluminum Knob - "The Magpie" - 1/4" Smooth Shaft (12.5mm OD)

Yup, that's the one.

Or just sell the whole thing to me as a blem

I've thought about keeping my blem enclosures and putting things in them to sell for a discount, but haven't convinced myself to do it yet

 

[JKos]

And sold, that was quick

I couldn't even find it. I saw kranahan's post right when he made it and started searching for it.

 

[FenderP]

I was going to change my Slampegg build to an X but am keeping it regular as it'll be closer to the real deal in sound. The 12AX7 isn't the sound I'm looking for. Kudos to Josh for being a great guy here