• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

6EC10DD9-B8FA-4D16-95F7-11FD382BCC6E.jpeg


The cure for not enough Orange. Happy Thursday!
 
No.., your ears are correct... a basses pu's/pu location will determine how it sounds. None of those songs were played on a T-bird.
Out of all our songs, I doubt if any were recorded on a TBird. Don't care. It's what I play.
I don't attempt to duplicate the sound on the recording, just the notes. We ain't the recording.
 
FWIW, my LPB-2/5 came from Gibson with active Bart HB's.

I currently play mostly passive basses - active basses are always capable of a big bass response. (which can be dialed back) On a passive bass - I've found there is less control of a bassy pu. As in - it's a bassy bass unless you start screwing with amp/DI levels. My Jolana Discobas is a bassy bass no matter what your on-board setting are. It's good bassy, but generally not for me. It has a unique electronics harness - each pot/knob is bass-treble for each pu. Gets some pillowy bass this one does...

upload_2023-4-13_21-5-57.jpeg
 
I'm nowhere near a technical minded person.
But these particular ones i have, (according to what little i know), were wired passive, but still require the pre-amp that accompanies them.
So, my feeble mind here questions how are they passive then?

The pickups are technically passive, but probably lo-Z (low impedance), which also means low output, so they need the preamp to drive your guitar amp. Otherwise they’d be pretty quiet even with the amp cranked.
 
Managed to score a scare Ibanez pedal from the L series which along with the 10 series is my favourite. For a dirt cheap price too.
20230413_201352.jpg


Of course it didn't work...
Oh well, got my money back from the seller and got to keep the pedal and now I'm hoping I can get it fixed. It powers up, the switch works but the signal doesn't get through or (from dry out) sounds like a very bad fuzz.
Looked very clean inside too, no broken printboards or anything. We'll see.