TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
And soon 340000 posts to this iteration of the club thread.Boo!
Page 17000! Thanks to @D.M.N. for the heads up!
Whoa!Boo!
Page 17000! Thanks to @D.M.N. for the heads up!
Tim - keep us posted on the outcome of the tap test. I don’t think you have single coils, but it’s a Gibson, so who knows?Yes, solid glossy black epoxy. Nothing else visible.
I definitely have continuous 58-59 Hz hum (detected by a tuner app on my phone that has freq. readout) with either or both volume controls up. Wearing the bass on a strap, I can rotate and get the bass in a position where the hum all but goes away (exactly like every other single coil pickup equipped bass I’ve owned), but if I turn a few degrees either way, it comes up quickly.Tim - keep us posted on the outcome of the tap test. I don’t think you have single coils, but it’s a Gibson, so who knows?
I don’t worry about being notified. I just check in every morningNeed some help from Mr. Wizard. I am no longer getting notifications on new posts. I end up 5+ pages behind. I have looked at settings and nothing appears to work. Any suggestions? It went from getting an email after a few posts since my last visit, to a notification for every post, to no notifications at all.
When I’m multi pages behind in this thread, I use the “Jump to New” at the top. Seems to work well, though I sometimes go back a page from there just to confirm I haven’t missed anything.My issue is I get busy and then the message counter says 148 this morning. There is no way to figure out where to start as the list doesn’t go back that far.
Yeah “Angry” Anderson is very short, 5’ 1” or 5’ 2”; something like that.Great tune. Thanks ,I didn't know about those guys. Love that the singer in the car had to slide the seat all the way forward to reach the peddles.
Cheers!
You may have missed my earlier post describing how to confirm if you have single coils using a tap test. Check it out, I think it will answer your questions.I definitely have continuous 58-59 Hz hum (detected by a tuner app on my phone that has freq. readout) with either or both volume controls up. Wearing the bass on a strap, I can rotate and get the bass in a position where the hum all but goes away (exactly like every other single coil pickup equipped bass I’ve owned), but if I turn a few degrees either way, it comes up quickly.
I’ve spent hours and days shielding and grounding this bass. Nothing I’ve done has changed the hum in the slightest. That’s why I’m convinced the pickups are single coil or have only one of the two coils connected to the leads.
By the way, the DC resistance of the pickups are;
Bridge: 9.37 K ohms
Neck: 9.27 K ohms
I have good continuity between the sleeve of a cable plugged in the output jack to the bridge & even to the tuner posts. 0.2 ohms between the jack ground and bridge, 0.6 ohms between the jack ground and tuner posts (continuity through DR coated strings…)
I thought that you built basses but wasn’t 100 % sure. So what do you think of individual bridge pieces such as those that are on Yamaha’s Nathan East signature bass?Yes, and if I were designing/building an aesthetically 'modern' vibe bass, I wouldn't consider the Babicz. A bridge I like that I'm using on my latest build is the Sandberg - fully-adjustable and elegantly designed.
View attachment 7459335
Used it on my last build also -
View attachment 7459337
Yes there is.My issue is I get busy and then the message counter says 148 this morning. There is no way to figure out where to start as the list doesn’t go back that far.
I've used them on a number of my basses, a few with the Yamaha units which are well designed. There's lots of variety out there and even the least expensive work just fine. They are good for variable width string-spacing.I thought that you built basses but wasn’t 100 % sure. So what do you think of individual bridge pieces such as those that are on Yamaha’s Nathan East signature bass?

Indeed I did miss the post. I’ll be checking this out 1st thing in the morning. I’ll let you know what I find.You may have missed my earlier post describing how to confirm if you have single coils using a tap test. Check it out, I think it will answer your questions.
Here’s the link to the post
Original note posted on different forum from @Tim Skaggs
I have a stock / original ‘91 Gibson Thunderbird that has 60 Hz hum like a Jazz Bass with two bridge pickups.
It’s shielded to death with conductive paint AND aluminum shielding tape in the control cavity and the pickup cavities. Everything is grounded and has been checked with a meter to verify good continuity.
The internet says the original ‘91 TBirds have “humbuckers” in both neck & bridge positions. I have my doubts about that. Either one of the pickups turned on, or both on
and it hums to high heaven.
The wires from...