• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

Hey all, I'm pretty out of the scene for a bit, but I have to wire a pickup onto a pot so I can get my 'Bird back into action (pix will come). So, my question is, for a simple 2-lead connection to a vol pot with three tabs, which goes to which? And... if you're looking at the back of the pots, as they sit in the control cavity, how do you number the tabs- which is tab #1?

Many thanks!

How's everybody? Marco said to say 'Hi'...

With the tabs below the body of the pot, from left to right = 1, 2, 3 ... 1 = pup wire, 2 = output to jack, 3 = ground.
 
With the tabs below the body of the pot, from left to right = 1, 2, 3 ... 1 = pup wire, 2 = output to jack, 3 = ground.

I am constanty amazed by Kat's wealth of technical knowledge.

Somebody else used a "We're not worthy" pic recently, so I won't... but it applies.

And BTW, after you all schooled me on Ohms, etc., I read a buncha stuff online and ACTUALLY UNDERSTOOD IT! So, thanks!
 
Stickers leave there mark on nitro, not noticeable to the naked eye, but under black light, it's very noticeable.
And no, I was not the one that put them on. Actually they were already removed long before I bought the bass.

After I brought the bass home, I got the idea to use the black light to see if there was any funny business with neck/headstock, there wasn't, but I stumbled upon these.
 

Attachments

  • FCA28BE7-1086-4465-9CEB-DF4CB933935F.jpeg
    FCA28BE7-1086-4465-9CEB-DF4CB933935F.jpeg
    304.6 KB · Views: 23
  • 5078F15A-67F2-46BE-AB40-4B660251F8F9.jpeg
    5078F15A-67F2-46BE-AB40-4B660251F8F9.jpeg
    323.8 KB · Views: 23
  • 65D584C0-4047-4889-940F-E7CC2F88BAD7.jpeg
    65D584C0-4047-4889-940F-E7CC2F88BAD7.jpeg
    289.4 KB · Views: 19
Stickers leave there mark on nitro, not noticeable to the naked eye, but under black light, it's very noticeable.
And no, I was not the one that put them on. Actually they were already removed long before I bought the bass.

After I brought the bass home, I got the idea to use the black light to see if there was any funny business with neck/headstock, there wasn't, but I stumbled upon these.

No way around it, they leave there marks.
Personally, I couldn't sticker up a bass.
 
Afraid you'll like the 'Girls, Girls, Girls' album? And would be afraid to admit it?

Something like that :)

I have a sticker on an old Dano bass I use as a Bari. It’s a cheap bass that occasionally is kinda magical. A buddy’s very young child put the sticker in while they were visiting the studio. She thought that bass ‘needed’ it. Maybe you had to be there, but the kid was so earnestly adorable I’ve never removed the sticker
86FFEC35-C24D-4C72-8E1D-B0A4E01057CC.jpeg
 
Something like that :)

I have a sticker on an old Dano bass I use as a Bari. It’s a cheap bass that occasionally is kinda magical. A buddy’s very young child put the sticker in while they were visiting the studio. She thought that bass ‘needed’ it. Maybe you had to be there, but the kid was so earnestly adorable I’ve never removed the sticker

There's a lot worse places than the PG for that sticker to have landed. ;)

:thumbsup:
 
Something like that :)

I have a sticker on an old Dano bass I use as a Bari. It’s a cheap bass that occasionally is kinda magical. A buddy’s very young child put the sticker in while they were visiting the studio. She thought that bass ‘needed’ it. Maybe you had to be there, but the kid was so earnestly adorable I’ve never removed the sticker
View attachment 2891963
:roflmao:



At least there's a story behind it, and it's on the pickguard.
 
Stickers leave there mark on nitro, not noticeable to the naked eye, but under black light, it's very noticeable.
And no, I was not the one that put them on. Actually they were already removed long before I bought the bass.

After I brought the bass home, I got the idea to use the black light to see if there was any funny business with neck/headstock, there wasn't, but I stumbled upon these.

Right. But it has zero effect on the play-abiltiy of the bass. From the point of view of a collector, it has meaning or if you just don't like them on your bass, which is fine as well.

To my eye a bass that is is perfect, has not been used enough. No stories, no experience or "mojo" if you will. I like a visual history and to me, scratches dents and stickers are a part of that. I also see basses as "use items". I take care of them and don't abuse them but understand that if you are doing it "right" (my definition of right) things were out.

.
 
Something like that :)

I have a sticker on an old Dano bass I use as a Bari. It’s a cheap bass that occasionally is kinda magical. A buddy’s very young child put the sticker in while they were visiting the studio. She thought that bass ‘needed’ it. Maybe you had to be there, but the kid was so earnestly adorable I’ve never removed the sticker
View attachment 2891963

I think that's sweet.