• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

I considered just buying another ring and stacking them, but I don't know which ring to get. So what's the consensus among my Bird Brothers?
the spacer is thicker than another ring. Whether or not a second ring will work, depends upon how much height you need.

I have a spacer. but for my Lollars, a second ring would have been fine. They are so very high output, I don't need them raised close to the strings.
 
Used early 2017 model VP bird...
[Invalid or Expired Link Removed]
No affiliation, I'm just doing my job as a fellow enabling club member.
The serial number looks like the bass started out burst, then got resprayed white with the serial masked off. The back of the neck looks like it's a slightly different color, too. Maybe that's lighting, but back of the headstock sure looks odd. It's a good price, though. Maybe it has been repaired.
 
Used early 2017 model VP bird...
[Invalid or Expired Link Removed]
No affiliation, I'm just doing my job as a fellow enabling club member.
Unless they used both kinds of tuners early on, I think that's a later version with the tuners now being used. (See examples below.)
 
Last edited:
The serial number looks like the bass started out burst, then got resprayed white with the serial masked off. The back of the neck looks like it's a slightly different color, too. Maybe that's lighting, but back of the headstock sure looks odd. It's a good price, though. Maybe it has been repaired.
As I recall that's what all their warranty/second ss# labels look like. But you may indeed be right.

Looks like the guy worked in a garage and didn't wash his hands before playing.

I do like that the FB is darker.
 
As I recall that's what all their warranty/second ss# labels look like. But you may indeed be right.

Looks like the guy worked in a garage and didn't wash his hands before playing.

I do like that the FB is darker.
I didn't know they ever made labels like that. If it's a second label, then that would also explain the lower price. It's probably worth making them an offer.
 
Here's the two different tuners used:

First version
3uK-2aRe2Anfes8Mb7WeElk3ixk_vu9FGs_DBfIs5jMWDFvTj7AstYHXgJY5eU9_na11xgVDCtVzYUbdQ=w1010-h1346-no.jpg


Second: Notice also shorter stems to the cloverleaf as well
3oid4yRErEpkNDW2f0enH4Tq4aJdaC0ZBZAFuXLd698xiQaniMIwRmRGU2Syhge2mO4q38VEoKScse9ww=w1010-h1346-no.jpg

Stickers were on that case in the background when I got it. Have no idea what they are, so if it's a child eating cult, I'm not a member. That's the case the burst VP came in.
 
I'm needing some help. I just got a non-reverse Mike Lull T-5 and I need to get a stand for it that is long enough. I have a Hercules stand and the nuts that hold the leg braces are right where the bass hangs - and I really don't want to scratch up the finish. I have an extremely high-tech piece of bubble wrap around that area but would rather have something that fits. Any suggestions?

Lull T5 small.jpg


Dan
 
I'm needing some help. I just got a non-reverse Mike Lull T-5 and I need to get a stand for it that is long enough. I have a Hercules stand and the nuts that hold the leg braces are right where the bass hangs - and I really don't want to scratch up the finish. I have an extremely high-tech piece of bubble wrap around that area but would rather have something that fits. Any suggestions?

View attachment 3788233

Dan
<correction> - that would be a REVERSE Thunderbird. Standard tripod stands work better imo. just gotta be careful to adjust the bottom fork accordingly and make sure the foam rubber sleeves are not old and dried up.
Welcome to the Club!
 
Last edited:
I'm needing some help. I just got a non-reverse Mike Lull T-5 and I need to get a stand for it that is long enough. I have a Hercules stand and the nuts that hold the leg braces are right where the bass hangs - and I really don't want to scratch up the finish. I have an extremely high-tech piece of bubble wrap around that area but would rather have something that fits. Any suggestions?

View attachment 3788233

Dan
Interesting. I use Hercules stands for all of my basses, guitars, ukuleles and microphones. I've never seen a Hercules stand that looked like yours. I can't even find it on their website. I wonder if you managed to get a counterfeit one. It should look like this...
GS414B PLUS
If you just bought it I'd return it before it damages a nice bass.
 
Interesting. I use Hercules stands for all of my basses, guitars, ukuleles and microphones. I've never seen a Hercules stand that looked like yours. I can't even find it on their website. I wonder if you managed to get a counterfeit one. It should look like this...
GS414B PLUS
If you just bought it I'd return it before it damages a nice bass.
Mine looks like that..
 
the spacer is thicker than another ring. Whether or not a second ring will work, depends upon how much height you need.

I have a spacer. but for my Lollars, a second ring would have been fine. They are so very high output, I don't need them raised close to the strings.

I have those Lollar's in the Bird that's in my avatar. Love em, thanks to @bylar13
 
So your stand does not have the fully padded front legs? That's odd.
Look through their website, I didn't see any stands that had completely exposed bolts on the front legs. If they have such a beast it would be a colossal design failure.
and/or discontinued.....probably originally intended for guitars...