V3 Rumble reliability data

[EatS1stBassist]

Fender does honor their warranties, but there has been a change in them. Assuming all transactions are in U.S., my understanding is:

A. If you bought your Rumble 200 combo in 2019 used from someone who bought it new before January 1, 2017 then, yes, it has the 5-year transferable warranty. You need to have the original receipt from the original buyer to establish beginning date.

2. If you bought your Rumble new anytime after January 1, 2017 it may have had the 5-year warranty tag still on it but it, in fact, has a 2-year non-transferable warranty. Not all resellers are very diligent in removing those from such "NOS" products, since honesty is their only incentive.

iii. There is a link to U.S. Fender's warranty webpage on the Rumble Club Wiki page linked in my signature, in the Rumble Info on U.S.Fender.com section.

¥. Some countries have consumer protection regulations that, in effect, provide extended warranties for such electronic devices regardless of manufacturers policies.

Hope this helps.
.

Thanks I bought from a music store.

 

[Artman]

I purchased my Rumble 500 head used, and it had a very scratchy noise. I cleaned the pots and switches with Deoxit. No more problem. I've rehearsed, practiced numerous hours, and played an important outdoor gig with it since then. Still trouble free.
I just purchased a used 2019 Rumble 210v.3 cabinet that had "something knocking around inside of it". It turned out to be the wire harness connecting the two tens slapping against the internal crossbrace. Rotated one speaker to take up some wire slack. Problem solved.

 

[vvvmmm]

Rotated one speaker ...

Hope ya changed the oil while you was at it.

 

[jmcgliss]

My Rumble 100 has seen regular use at band rehearsals for over four years. No problems to date.

FWIW, whenever I hear of "intermittent" signal loss with any amp - try this. Connect a 1/4" cable between the Send and Receive jacks. Certain types of jacks can vibrate and interrupt the signal - especially if contacts have oxidized. If it works, the repair is free.

 

[Katoosie]

Rumble 100 v3.
No issues to date after 8~ months!

 

[Mvf]

Had a lot of Rumbles, all v3:s, never ever had an issue with any of them.

First a 500c, that I later sold and got a 500h + 2 * 115 rumble cabs. Also these I sold because it was just overkill for my needs.

Currently rumbling a 200c as my main amp, and I also have a 100c as a ”grab and go” amp.

Depending on how my ”band situation” now developes, I might pick up another 200c or maybe even a 500c, so I don’t have to carry one amp between two different rehearsal places. A bonus would be the possibility to daisy chain them for the ”big gigs”

 

[FirewalZ]

I posted earlier, but gigged regularly for a few years with a 500h and x2 210’s, with zero issues. I’ve since moved on to GK and Mesa, but still think the Rumbles are the best “budget” line, solid sound and reliable.

 

[CallMeAl]

My Rumble 100 has seen regular use at band rehearsals for over four years. No problems to date.

FWIW, whenever I hear of "intermittent" signal loss with any amp - try this. Connect a 1/4" cable between the Send and Receive jacks. Certain types of jacks can vibrate and interrupt the signal - especially if contacts have oxidized. If it works, the repair is free.

Thanks for reviving the thread!

Not long after I posted this, I got a Markbass for my gigging amp. Then shutdown happened I ended up buying a Rumble 25 for the apartment. We resumed outdoor rehearsals (and a few gigs ) so I was using my Rumble 100 again- but the 25 has gotten more play time this year than all my other amps put together!

happy to report: still no issues

Depending on how my ”band situation” now developes, I might pick up another 200c or maybe even a 500c, so I don’t have to carry one amp between two different rehearsal places. A bonus would be the possibility to daisy chain them for the ”big gigs

I was doing this for a while with 2 100s. If the “big” option is seldom used, it is a very cost effective and practical way to go!

 

[jmhaslip]

I got my Rumble 500c in the spring of 2016 and gigged it nearly every week since then. I have had no issues with this amp.

 

[jeff7bass]

I don't have one by my buddy's been playing his Rumble 500/210 out quite often and sounds great with no issues. I've read a ton of reviews and they seem quite reliable.

 

[Bruno1950]

I bought a new Rumble 100 v3 in June 2020; happy to report no problems. Must get round to joining the club!

 

[cb56]

Bought my Rumble 200 new a little over a year ago and so far no problems. I play mostly steel guitar now but my bass comes out now and then so it's had light duty work. It did however take a nice tumble off of a 2 wheel cart one time. Fortunately landed on grass and only rolled once. I was sort of expecting problems after that but so far so good.
BTW I just ordered a Rumble 40 for taking to practice and smaller gigs. The 200 isn't heavy but it is a bit bulky so I'll reserve it for larger gigs and outdoor stuff. Got an outdoor church function coming up this Sunday so I'll definitely use the 200 for that.

 

[CallMeAl]

I bought a new Rumble 100 v3 in June 2020; happy to report no problems. Must get round to joining the club!

Nice thread bump!

My 100 has been dormant all winter, but we recently started rehearsals and it’s working great still.

Also added a 25 for home in Mid-May, so nearly a year of faithful daily service!

 

[cb56]

My Rumble 200 with my trusty old Ibanez SR755
I'll post a pic with the Rumble 40 when it arrives.

 

[trseal]

I got a R200c last summer. Added a R210 cab a few months ago. Great combination and zero issues.

Tim

 

[Steadfast]

I own twin 500 combos. My oldest one will work through the effects loop only. Through the bass input it crackles loudly. Six years old. The newer one is about four now. No problems with the newer one. I slave them together so it is t a show stopper.

 

[Miles_ONeal]

My 100 mainly stays at home for practice or playing along with a streaming broadcast. It gets used a good bit at varying volumes. I bought it used ~3 years ago. No problems at all.

 

[Artman]

I have one of the older 500H heads. I purchased it used from GC a couple of years ago, so I don't know its history. I have used it with a pair of 112 cabs, with a 112 and a 210, and with the 210 cab alone. I had to clean the pots with Deoxit when I first got it. Other than that, it's been completely reliable.

 

[4dog]

if ya gotta revive a thread...this was a pretty good choice!!

 

[Shawn Luckman]

Got my Rumble 200C back in Jan 2015 and it's, still working as good as the first day I bought it.