Warrior Club Part 2

[GrooveWarrior]

gorgeous one,
it make me want to add wooden cover for my pick up, but i think it'll be not possible on my pick up config without attacking the top to increase the size of the "hole"

Usually the plastic pickup housing is replaced with the wooden housing. The wood doesn't typically go over the plastic housing.

 

[JeX]

sure but the mm pickup have three screw poles outside of the pick up volume, as shown here

Link Removed

so the woodwork must be expensive, if possible...
and i'm not sure that the barto plastic cover can be remove

 

[JeX]

oki split modification done, it solve the volume issue when balancing from one pick to another. the real interest is a new sound, less muddy for the mm pick up.

yet i have something in mind, i had the chance to sse a jb celinder with lolar pick up and glockenlang preamp, i really liked the range of frequence and the efficency of the mid knob.

i never use mine because of the sound becoming muddy indistinct or simply awfull.

so do anyone of you change the preamp for something else ?

 

[Vic]

oki split modification done, it solve the volume issue when balancing from one pick to another. the real interest is a new sound, less muddy for the mm pick up.

Pictures?

 

[JeX]

picture of the modification ? the soldering schematic ?

 

[GrooveWarrior]

picture of the modification ? the soldering schematic ?

Yes and yes. Also would like to see a shot of where you located the switch on the front.

If you don't mind.

 

[JeX]

picts here,

i change volume pot for a push pull

on off pict

Link Removed
Link Removed

from the inside, pig push pull fit in

Link RemovedLink Removed

 

[GrooveWarrior]

So, is the front coil engaged when you pull, and both coils when it is down?

 

[JeX]

both coil when down and back coil when up, my luthier tell me that he didnt have the choice for it, i would prefer the front one but it seems that without rewiring everything, its impossible.

by the way i wonder what modification Jdran does to the barto preamp, i read here that some of you remove the modification, in what terms does it change the tone ?

 

[DEbassist]

Hey Jex, I'm heading down to his shop tomorrow. I'll ask him about the sparkle circuit he puts in there. Kinda curious myself.

 

[p0k]

Hey Guys,

I know it's bounced around a lot recently, but this beauty is on its way to me in a trade...I've never tried a Warrior so I'm pretty pumped!

 

[bass4worship]

Great basses p0k.

 

[SevenReasons]

Hey Guys,

I know it's bounced around a lot recently, but this beauty is on its way to me in a trade...I've never tried a Warrior so I'm pretty pumped!

This bass absolutely rocked!!!! I only had her for a week but I loved it. Such a great bass for playing all night too, so light. If I wasn't working out some endorsement stuff I would not have let it go. Pretty sure you are going to be very happy with that bass sir.

 

[JeX]

stunning one, i love this pick up configuration

@Debassist dou you have a chance to know more about preamp modifications ?

 

[p0k]

Do you guys know what the knobs and switch on the preamp do? Is it volume, blend, stacked bass/treble, mid, and mid freq select?

 

[GrooveWarrior]

Do you guys know what the knobs and switch on the preamp do? Is it volume, blend, stacked bass/treble, mid, and mid freq select?

Yes.

 

[DEbassist]

Here are some shots from my trip to warrior yesterday

 

[DEbassist]

The neck

 

[DEbassist]

Body

 

[DEbassist]

A couple more