• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Zoom b3 patch Ideas

#901
Here's a new patch idea i came up with. this patch closely duplicates the killer tube emulated sounds of a verellen meatsmoke preamp pedal.

Killer bassdrive

Section 1: bassdrive: bass: 3, treble: 4, presence: 3, gain: 50, blend: 70, level: 90, mid: 7

Section 2: t-scream: gain: 25, tone: 50, level: 100, balance: 30

Section 3: flip top: bass: 3, mid: 4, treble: 4, midfq: 200hz, gain: 40, level: 90, ultra: low, cab: ag1x15, mix: 50
 
  • Like
Reactions: TitaniumRx
#902
Here's another patch I came up with. this patch is similar to killer bassdrive, only it has the aguilar amp model for more clarity and punch.

Killer bassdrive 2

Section 1: bassdrive: bass: 3, treble: 4, presence: 3, gain: 50, blend: 70, level: 90, mid: 7

Section 2: t-scream: gain: 25, tone: 50, level: 100, balance: 30

Section 3: ag amp: bass: 3, mid: 4, treble: 4, midfq: 250hz, gain: 30, level: 70, char: bright, cab: ag1x15, mix: 50
 
  • Like
Reactions: TitaniumRx
#903
Here's another patch idea I came up with. this patch has a clean punchy sound with a warm low-end boost.

Mega bass

Section 1: bottom b: bass: 4, treble: 3, level: 45

Section 2: m comp: thresh: 20, ratio: 5, level: 90, attack: 7

Section 3: heaven: bass: 4, mid: 4, treble: 3, midfq: 300hz, gain: 50, level: 90, enhnc: 2, cab: e4x10, mix: 50
 
Last edited:
  • Like
Reactions: TitaniumRx
#904
RedsFan75 said:
Have the M comp on the one I'm using now, but was using the bassman. Got any good M comp settings for that tight compressed sound? Thanks again.
Click to expand...

Anytime dude...I normally don't use compressor effects that much, but I would say that the m Comp and the limiter are by far my most favorite compressor models to use on the zoom b3. I've used them on some of the patches I created on my zoom b3.
 
#905
kanelk said:
Is there any chance to have the tone of the Tung bass of John Muyng? Any kind sir?

Click to expand...


Try this and tell me what you think
The bass MUST be with dual coil Humbuckers and Nickels.I try it with split coils and sound good,but with the dual coils sound a lot better.Use the bridge pickup to strength the harmonics and the crawl.

1.M comp: THRSH= 38 - Ratio= 9 - Level = 80 - Attack = 9

2.GraphicEQ: 50Hz= -5 - 120hz= -3 - 400hz= -1 - 500hz=0 - 800hz=2 - 4.5khz=5 - 10khz= 6 - Level = 100

3.Ensemble: Depth = 48 - Rate = 30 - Mix = 75 - Tone = 5 - Level = 100.

Play with the EQ and the mix on the Ensemble.

I think is perfect for the tone you search ;)
 
  • Like
Reactions: kanelk
#906
Crystalman85 said:
Here's a new patch idea i came up with. this patch closely duplicates the killer tube emulated sounds of a verellen meatsmoke preamp pedal.

Killer bassdrive

Section 1: bassdrive: bass: 3, treble: 4, presence: 3, gain: 50, blend: 70, level: 90, mid: 7

Section 2: t-scream: gain: 25, tone: 50, level: 100, balance: 30

Section 3: flip top: bass: 3, mid: 4, treble: 4, midfq: 200hz, gain: 40, level: 90, ultra: low, cab: ag1x15, mix: 50
Click to expand...

dude, i just registered here to thank you for this amazing patch. i've been trying to copy this amp on the b3 for months now and got pretty close but the settings you used for the bassdrive gave me what i needed to nail it! thank you so very very much!
 
  • Like
Reactions: TitaniumRx, Crystalman85 and OzzyGreg
#907
lukao_scalene said:
dude, i just registered here to thank you for this amazing patch. i've been trying to copy this amp on the b3 for months now and got pretty close but the settings you used for the bassdrive gave me what i needed to nail it! thank you so very very much!
Click to expand...

Anytime dude...I'm glad the patch worked out for you.
 
  • Like
Reactions: TitaniumRx and lukao_scalene
#908
Fantastic job keeping this alive and going, its really like you are exercising an additional functionality of the B3! I just picked one up myself yesterday and only had time enough to run through the factory presets and am dying to try my hand at creating some of my own :)
Again, great stuff!
 
  • Like
Reactions: Crystalman85
#909
Saif Abbas said:
Fantastic job keeping this alive and going, its really like you are exercising an additional functionality of the B3! I just picked one up myself yesterday and only had time enough to run through the factory presets and am dying to try my hand at creating some of my own :)
Again, great stuff!
Click to expand...

We're glad you enjoyed this thread. Feel free to try out the patches posted on this thread.
 
  • Like
Reactions: Saif Abbas
#913
Saif Abbas said:
What would be your approach to recreating this bass tone Crystalman? OzzyGreg ?
[Invalid or Expired Link Removed]

His bass tone for the first 1-2 minutes is divine!
Click to expand...

Sounds like some pretty strong lows. try using the bass preamp model with the bottom b and some compression and see how it works out for you. or if you own a bass with bartolini pick-ups, try using the acoustic amp model with the m comp model.
 
  • Like
Reactions: Saif Abbas
#919
Here's a new patch idea I came up with. This patch has a smooth warm overdrive overdrive that's almost similar to a fuzzrocious dark driving.

Dark distortion

Section 1: limiter: Thresh: 20, ratio: 4, level: 100, release: 5

Section 2: Bass bb: Gain: 17, bass: 3, treble: -2, blend: 45, level: 90

Section 3: Monotone: Bass: 4, mid: 3, treble: 0, midfq: 300hz, gain: 50, level: 90, character: Dark, cab: ag1x15, mix: 50
 
Last edited:
  • Like
Reactions: TitaniumRx
#920
Here's another patch idea I came up with. this patch has warm, but clear bass sound with natrual compression.

Mega bass 2

Section 1: znr: thresh: 14, detect: gtrln, level: 90

Section 2: m comp: thresh: 20, ratio: 5, level: 90, attack: 7

Section 3: heaven: bass: 4, mid: 4, treble: 3, midfq: 300hz, gain: 50, level: 90, enhnc: 2, cab: swr4x10, mix: 50
 

Latest posts

Top Bottom
Back