Latest Posts

they been making shell pink since the 50s

Kubicki Fan said:

I had so many basses sprout fret, on high end basses even, that I bought a fret file, for DIY. I have grown to enjoy the tinkering, but once done, it's done.

I guess I could skeak into L&M with my file to have a bit of fun

Click to expand...

From '90, Jazz Plus and Ovation Premier Elite ABG, no sprout yet on either of these. Quality woods, quality build on both, USA-made.

Interesting! The fretted one I had had a slightly different pickup than that one on Reverb.

This may sound complex maybe someone can make sense of it, I have a humbucker connected to the mmsr preamp and I have a p pickup in the neck. Originally I was going to switch the preamp out but I like the sound of the preamp too much. So I was wondering will a unity gain buffer work for the neck pickup, isolates the signal from the preamp and can match the active preamp signal instead of coloring it? Any help will be appreciated

A pick thick relief is a pretty substantial relief, compared to what is usually recommended.

If you want to adjust the action of the strings further the bridge saddles is where that is at, not the truss rod.

Geoff just shared these shots of the completed bass. It should ship to me in a couple days!

Bergerama said:

Well that makes it a lot easier… yeah the D is 37.75 so it would just be the G.

Click to expand...

Now that we've established the fact your bass can take just about any "long scale" strings, thanks to the reverse headstock, I can make a recommendation...

SIT Foundations, which come in both stainless and nickel, depending on your preference. They're designed to be relatively flexible due to a thinner hex core used, making them suitable for slapping.

I'm not sure what your definition of "overpriced" is.

It is not a gated fuzz.

I personally found that I don't like the only clean lows and only mid/top drive recipe.

I think it sounds fizzy and wrong.

I also found that some drive pedals works great just as is blended with clean signal, without it sounding like theres a clean signal sitting on top of the drive signal or vise versa, and without it getting muddy, where as others requires some EQ to the drive sound to blend in nicely, depending on the inherrent character of the drive pedal in question and which kind of drive effect exactly you are trying to obtain.

Some drive pedals do require a small low cut, others a mid hump, others again a mid scoop, to sit nicely in the mix.

That said it probably helps my cleans to blend in nicely that they are not actually all that clean but overdriven, by a preamp that sits after my drive setup, giving the clean signal natural compression, and helping the drive signal blend in more smoothly as well, since it too is running through the same overdriven preamp.

Big Louzer said:

Back in High School, when my buddies and I first got our Lerner permits, my one buddy Steve used to sneak his dad’s ‘73 Monte Carlo out. We used to drive around Long Island City at night to get a glimpse of those snaky tooth-missin’ hookers…
Nothing like the hookers in movies at the time …

But in all seriousness, regarding my Carvin BX500 …
How long do these usually live?
I haven’t used it in a while, and it has very little run-time as it is. I’m always worried that I’ll turn it on one day and it’ll just blow up.
I’m considering investing in something like a MarkBass 58R.

Click to expand...

My SWR Baby Blue 2 lived a very long life, 26 years, until one day corrosion and age got into something, and it started acting up. It might have lived through it, but I started messing with it. A few squirts of Deoxit applied to the pots (in probably the wrong places) and messing with the tube preamp sent it to the afterlife.

Reviving an old thread for this - EQDELUXE

My compact pedalboard.

The signal goes to tuner, then to EBS Sheehan drive which splits it into clean and drive parallel channels. The clean signal goes to the MBD3 which splits it (again) to clean contoured blend and drive and blends it back together...and then the two signals get mixed back together by the EBS Sheehan drive...

So strictly speaking, there are three parallel signals: (i) EBS Sheehan drive, (ii) contoured clean blend of the MBD3, (iii) drive of the MBD3. Messenger jr affects the latter two because it sits in the clean loop of the EBS pedal after MBD3. Compression is applied to the blend of all three signals because it is located after the loops of the EBS pedal...

thanks to @ra0ulduke for directing me to this thread.

primal scream when they were actually good.

frustratingly short.

Login to view embedded media
and another from back in the day...

Login to view embedded media

​

I have one on order, silver face with tweeter, i added the twitter in case it was too dark and low.

Plan at the moment is to pair with my fender 100t all valve amp..I am also considering a Milkman 700 hybrid. 13lbs vs 47lbs
A month to think about it

Contact Hipshot customer service, they'll be able to tell you availability and when they'll make more.

RamblinRose said:

Looking for a good bass instructor in the North Austin area. I live In Georgetown in neighboring Williamson County. So the closer to Georgetown the better. Looking for a real bass player who is a good teacher, not a guitar player who just gives bass lessons on the side.

I am a retiree who took up bass late in life. Can play a bit, not a newbie. But want to up my game.

Any recommendations would be appreciated

Cheers,
btl aesthetics emsculpt
Ron Rose

Click to expand...

Hey Ron! Check out Dolce Music Studio right here in Georgetown, or head a bit south down I-35/183 to The Musician's Woodshed on Parmer. Both have legit, dedicated bass players on staff who cater to adult learners. Definitely call ahead to make sure you get set up with a primary bassist!

sissy kathy said:

I meant file off a wedge on the bottom rather than flat, if there is a danger of compromising the saddle break point.

Click to expand...

Got it! Shouldn’t take much. Could probably get by with running the insert back ‘n forth on a mill file like an eraser.

Riis

DaveParker39 said:

Did you keep the speaker sim on?

Click to expand...

I may have tried it a time or 2, but most of the time it was off. I don’t remember it having much of an effect on the live sound.

Shak_2112 said:

As above yes - the head is wired in parallel. I didn’t feel like one was enough - it was low down and didn’t push much air. It did however sound amazing still! If you can get it up off the floor it might work better. The DI sounded pretty decent if I remember - I don’t think you’d be disappointed with it. I have some DI examples on my demo video here:

Login to view embedded media
I ended up selling it as I was worried about the tubes going at a gig so opted for the Eich T-900. I loved the sound of the Terror Bass though - really warm.

Click to expand...

I’m considering switching from my orange box terror rig. I love it but the lack of a separate volume control between foh line out and cab volume is really frustrating. How is the Eich compared to the orange?

The GS has more low end than the DB imo and they use the same chassis so its the cab tuning.
I would never describe them as shy down there and the only cab that I found pillowed more...if thats what you want ...is Epifani.
However, no chassis does it all so its how you tune the cab to add and subtract what you want and like.

My thinking is the best config is a 12 and a 6 where the 6 picks up from where the 12 runs out of steam, better than a horn typically.

I have a lighter ceramic 2x112 which do lows well enough, but I did really like the GS112 over the DB112...but i think the horn gap is just a bit wide.
Having said that, I didn't have the current amp I'm using.

Teryup said:

I want an analog octave down with an effects loop that has the ability to switch between just affecting the clean, just the sub, or the whole signal. I also want a switch to select whether the effects in the loop stay in the signal path when the octave is off, and a kill the dry foot switch.

Click to expand...

Yes

guitarflinger said:

I just converted my 4 string P bass to (in effect) a 5 string. I replaced E A D G strings with B E A D strings. I frequently use a low D, and pretty much never use the G string. So far, it's working well. Anyone tried this? Any truss rod issues? (no visible change in neck.)

Click to expand...

Okay... In order?
1. Yes, I've tried it. I have an '06 Carvin LB-20 bass that, around 2012 or so, was... let's just say; "surplus to requirements". Why is a long story, and not germane here. It was my BEAD bass for about 6 years, until I turned it back into a "Regular" 4-string bass. Why did I change it back? Mainly because a) it became obvious that I really had no use for a B string; and b) the bass was no longer "surplus to requirements". It's worn Optima 4099 "Chrome" Flats since I changed it back, about 8 years ago. It gets played fairly often - a lot more often than it did, tuned BEAD...
2. No, I never had any truss rod issues. Actually, when I turned it into a BEAD bass, it was wearing Sadowsky Blue Label Flats; I replaced them with the heavy strings from a 5-string set of La Bella Black Tapes. I did have to adjust the truss rod, but that was because the Tapes had considerably less tension than the Sadowsky Flats did. I replaced the Tapes after a while, because they felt... kinda limp - especially the B string. The 65-130's from a set of Roto RS775LD Monel Flats I replaced them with, felt - and sounded - much better. I had to adjust the truss rod a bit, but... nothing out of the ordinary. The Roto's stayed on the Carvin until I decided to put it back to EADG tuning. When I had to adjust the truss rod - again...
Other than that? I replaced the nut with one cut for the heavier-gauge strings. I did keep the original nut, though; and when I put the bass back to EADG? I just swapped out the nut. I didn't have any trouble intonating the BEAD strings, but... quite a few people seem to have difficulty with it, from the posts on the BEAD Club thread here. I didn't, but... there was very little room left behind the saddle on that Hipshot bridge, after the B string was intonated. Personally? I think it depends on exactly where the factory put the bridge, more than anything else. Although, nobody with a Fender bent-plate bridge ever said they had a problem...
So, did I have any real problems with tuning that bass to BEAD? No, not really. In fact, if BEAD tuning had been the least bit useful - to ME? That Carvin would most likely still be wearing those heavy Roto Flats...

I just found out a out this looks interesting to say the least.

Currently playing an 83' Ibanze Dt 600 bi-amping Peavey 400 & 300 mark iii into Trynor 4x12 and a home made 15in bass cab.. lets get loud and low!!

In a dream world I will one day find my vintage post 1967 Vox Festival 18in Cabinet . In it i will use my never mounted date stamped Sept '76 Celestion G 18c i found in a box in my friends garage that he forgot he had.....

Keep making loud nosies!!