Search results for query: *

I had an SVT 4 pro years ago. Sold it and regretted it ever since. So, I just got another one. I have several 8 ohm cabs that I can run but I’m trying to figure out the best configuration. If I run the cabs in parallel (in one, out of that one into the other) and run that from one side, it will...

Beautiful Lull MV5. 21 fret, 35" scale. Bartolinis. I'm not sure what the preamp is. It's setup with a active/passive switch on the Volume knob. The. color is called Mary Kay. It's a semi transparent cream/yellowish color. It's in really nice shape, with just a couple minor flaws. What i...

So my outdoor rig is an SVT5 (which is like 1000 watts into 4) and a Mesa PH810 cab. Seems like I used to be able to knock over small kids, plow snow, move furniture, etc. with it. Here lately, it seems like it just doesn't have what it use to. I checked to make sure all 8 speakers are ok...

I posted this in the pedals and effects page and I'm not smart enough to move my post. http://www.talkbass.com/forum/f213/avalon-u5-rack-ears-$400-shipped-1017224/

Dbx 160A compressor. I'm going to an all pedal rig so I don't need this. Functions as it should. One rack ear has a very slight bend but it is very minor. The only trade id be intersted in would be a POG 2 or maybe a EXH bass synth, but it would have to really nice. I'll take paypal or a...

That should about cover it.. Its in good shape other than a minor shallow scratch in one of the rack ears. I never noticed until tonight. I'm not really interested in any trades except for a POG 2. I'll only take paypal or a money order. I'll only ship it to the Conus. Thanks for looking.

Hey guys, I blew the voice coil out of my WP 12. Does anyone have any suggestions on what I should replace it with? The WP 12s are rated at 200 watts. The original speaker is a an Eminance.

So I've have my SVT5 Pro for a couple years. It's a friggin monster. Over the past 8 months or so, I've been playing it through a Mesa PH810 cab. At Saturday's gig, during sound check, the output volume went really low and crackly and distorted. I worked the master volume pot backa nd forth...

I have a SWR WP12 that I use as my practice amp. Recently it started making a wierd noise when i play certain frequencies, especially while i'm slapping or playing percussive ghost notes. Its kind of a clucking, "wok, wok" almost wahwah kind of thing. My guess is, the speaker is smoked, which...

Does anyone have or know where i can find the bass tab for Over Easy by Steve Morse? I cant find it anywhere, and I cant quite get it. Thanks

http://i1133.photobucket.com/albums/m596/esears68/DSCN0757_zpsc2f41ec4.jpg http://i1133.photobucket.com/albums/m596/esears68/DSCN0755_zpsb9f13f6c.jpg http://i1133.photobucket.com/albums/m596/esears68/DSCN0759_zpsd95419bf.jpg If your're looking you know what it is. This is one of the...

SPECTACULAR Music Man Stingray 5 string. White with tort PG. Highly figured birdseye neck and FB. The only "flaws" that I could find were a tiny scratch on the corner of the headstock and scuff marks on the pickgaurd. I didn't buy it new, but the guy I got it from must have never played it...

So I decided to try a rack setup. I bought a U5 and a DBX compressor and I'm going to run it into a CS800s power amp. The guy I bought the Avalon from just ran it to the house so I'm not sure about the signal routing. So, I have 2 questions. 1) Should I send the compressed signal to the...

My current rig is an SVT pro 5, a Shro 21012L and a Shro BMF1215. I run stereo out of the SVT since the cabs are 4 ohms a piece. I'm getting about 400 watts per side, according to the Ampeg's manual. This is my outdoor, big stage, most volume rig. Inside I can run bridged and only run one...

Starting to narrow down my choices for a new (to me) old, tired back friendly rig. Brand new BX1500's are $569 with a year warranty. I can buy a Shuttle max 12 on here, used for about $700. My situation is this... I've got a 4 hm 1000 watt 21012L schroeder cab that I love, but it's just not...

If Tim Taylor played bass..... My cab is a Schroeder 21012L. This weekend, on an outdoor gig I tried 2 new (used) amp heads. An SWR 750X and an SVT-5 Pro. Both heads crush! I think I actually like the SWR tone a little better, but here's the problem. I don't think the 750X is enough...

I'm getting old, and fat, and lazy (er). I'm looking to replace my M9 with a lighter, hernia friendly, AMERICAN MADE class D amp. Am I dreaming? Is there any such thing? I need 750+ watts, I think. My main cab is a Schroeder 21012L rated at 1000W. We play everying from new country to...

This is probably a piece of cake for you equipment jockeys. I've never run more than one cab and I'm considering it. The question is, can i run 2 cabs with different impedences? If I remember ohms law from 100 years ago, the cab with smaller resistance will draw/consume more power. Right?

I really love the sound of my M9 through my new Schroder 21012L cab. I got the Schroder to replace my Berg HT322, so I;ve dropped 40 pounds. If I could replace the M9, I could probably lose another 25 pounds. Any suggestions? I'm thinking Shuttle 9.2? I need about 800 watts or better...

Not much more to say here. It's my Berggie HT322. For those of you who don't know, it's 2-10s and a 12 with a horn. 4 ohms, 800 watts. Don't remember the s/n, but it's the one with the chrome grill. This cab is an absolute monster. It's been my main cab for about a year. It's got some...

Gas pains have got me again. This is a great Brubaker NBS-1. If I remember correctly it is 2000-3, which (again if I remember right) was the 3rd bass he made in 2000. It's a 5 string with Bartolinis and the 9v Bart pre amp. It has an active/bypass pull type switch. It's a coco bolo FB with a...

I have 2 OPB-3 preamps that I'm not going to use. I bought one here, then got another one in a trade. I was going to build a bass and put the other pre in one of my other basses. Well, something else came up and I don't need either one. So, they're for sale. They have both been soldered...

Do any of you guys know where I can find a 35" bolt on neck? Warmoth is the only one I can find and it's only in the Gecko style. I'd really like a Fender Jazz type neck, or something close to that. Any suggestions?

For sale Voodoo Labs Pedal Power 2 with 6 cables and Mounting brackets. $125 (SOLD) Boss DD20 Digital Delay gently used with box and all paper work. $160 (SOLD) Boss GE7 7 band EQ with box and paper work. $60 (traded) 10-George L right angle pedal board 1/4" connectors. 10 Blue...

This is a really nice instrument, I just find that I'm not gigging much any more and I've got GAS! So, time for it to move over for something new. Anyway... Here are the details. I think it's about 92-94 vintage by Carvin's Museum Through neck design with 1 piece maple neck Koa wings...

I bought this bass thinking I would jump into the 6 string world right. Turns out there is no place for 6 string bass in "Mustang Sally" and "Gimmie 3 steps". At least not that I have found. Anyway, here she is. Keith Roscoe SKB 3006 Tranparent Red QM top I'm not very good identifying...

I have a great sounding early 90's Carvin LB75 that plays great. I found a brand spanking new EBMM in my go-to shop and I had to take it home and check it out. I was amazed that they sounded to similar. Both are punchy, midrangey, and clear. Both are "CLACKY". Most of what I think is is...

I played a brand new rig out for the first time this weekend. It's a Mesa M6 Carbine into an H322 Bergie cab. It really smokes. During the set though, I started noticing that certain notes got swollowed up and were much less audible than others. The worst one was D note on the A string at...

I recently came accross a 5 string bass for sale locally, in a music store in Cincinnati. I was told it was built by Tom Weber (Van Halen's guitar Tech) back in the late 80's. It Mahogany with a Koa top, 2 Bart quad coils, and 35 inch scale. Its got a very "Jackson-esque" headstock. It looks...

SOLD

I seem to be getting a lot of fret noise (clickety, clickety, click) especially when I'm slapping. Is it my technique, or could it be the way the bass is set-up, or is that just the way it is? It's an American Jazz Deluxe with SC Active P/U's. I have followed Fender's setup guidlines; Is that...

I just bought a new Jazz Deluxe with SC Active P/U's. I have to run the treble tone knob fully off and the bass tone knob fully up to get the tone I want. If I run it flat, it's way too snappy, bitey, trebley, whatever you want to call it. My questions is, will flat wounds tame it down a bit...

I recently started playing bass full time again with a local southern rock/country band. We will be playing mostly clubs and receptions, with some outdoor festivals thoughout the year. There are 2 guitarists and a drummer in the band. Both guitarists play high end class A tube amps (Matchless...