Search results for query: *

AMPETRONICS Hearing Aid Company based in Newark On Trent Nottinghamshire England, near the VW Dealer and some Car Sales, with a Turning Screw Oppsite and a Main east Train line behind that, to the Right the Bridge of the OLD A1 that used to pass via Newark~ Wow they Moved Northern Rd...

The Copper Tape is used to make a Induction Coil around a Room with a AMP on the side to boost the signal Current Based. I used to work for the company a Long time ago

There are few different types of DPDT switches (On-On/On-Off) (On-On-On) and (On-Off-On) tho the (On-On-On) and (On-Off-On) are more DP3T| The DPDT (On-On-On) can be used to select 2 Pick ups With the Middle location Being Both Pick ups DPDT (On-On) or (On-Off-On) can be used as a Coil Flip if...

2 SPDT (or Higher) Invalid Link Removed this is working like a Binary Switching Up as 0 and Down as 1 00 Top 01 Hum 10 Both 11 Bottem As for a "Kill Switch" im not sure its needed, turn the Volume down to 0 then its going Direct to ground. Also if you wanted you can get a PUSH PULL Switch on...

Just want to watch this post. More than any thing. P-Pickups (Two small pickups, that are linked in series by default) Neck and Bridge Neck Neck & Bridge Parallel Bridge also wanting Neck then linked up to the Bridge in Series, ie one after the other. 4P5T switch of a Strat. 1) Bridge + 2)...

Few ways might do this. 1) Two Push/Pull knobs, 1/ Series/Parallel 2/Phase one pickup 2) using a 5Way super switches (4P5T) Super switch will let you pick it how you want as each connection . So could have NECK/Parallel/Series/Phase Parallel/Bridge If you use a Push/Pull along with...

looks ok to me Just make sure that Ground on the Volume isnt touching the output to the jack also what size cap is that!

Stealth is dam good person, read a lot of his posts and explains things and with great diagrams. Most of the time i see Stealths Posts i dont Pot (whats the point when he has done all the work) ;)

I think blend with a master volume with a kill switch built in As for the blend, could have a blend pot that when all the way to the right is the P pickup and all the way to the left is Jazz, all other times is a blend pot Blend: Dual Pot Take apart the pot, on the common (inner circle) you...

I did think you had a - Part of a Wave in a Guitar, as GROUND is the Base Line on the other end so + is the only side of the sign wave that comes out. so a Diode should work! <been up most of the night and im not feeling well>

A Blend with a Master Volume The Blend will act like the two Volumes getting a balance how you want it and then volume can drop it down (tho most seem to leave it on 10 there might not have a volume pot, so many use the volume on the AMP)

This is a 11 Positions with one being off. If you had a On/Off/On Toggle with a 2P6T you can have 12 Positions with 1 Resisters only. ill try and recall if there was any other ways like a on/on There is a 2P12T but its a FAT thing and costly Sorry it was very late when i typed that

you can get SMD Caps if you want

lol chicken for going middle of the road I would like to know more about a Treb Bleed for a bass, i made one for a strat

I can't see a problems, basically you want to use one of two pick ups in the neck and one of two in the bridge. I don't see a problems in that, but I've never tried it so would like someone to say OK go for it, as well as I'm 90% sure it be OK, but I have been wrong a few times PS I'm off to...

im sure you could do it.. and we dont know things tell we try them out for ourselfs Will help you out any way we can..

well do a Resisterance/Continunity test from the Pickup and work your way down the Line.. Im guessing there is ever a break in the Pickup itsself or its gone to ground at some point

I think the Magnetic field wil just add in to each other a bit.. its hard to say. Can you draw out what you plan .. Pictures are a bit easier for me to understand than a lot load of text

The Blend Pan with Dual Pot seems to mix very well.. form the look not tried it myself yet

would not a Blend Pot be better than TWO Volume and 2 Resisters or a blend pot and a Master Volume, that too would cut out the 2 Resisters

Treb Bleed I think G&L have a 200pF treb bleed on there units I use 1nF 10-6, 440pF 6-4 and 4-2 220pF and a turn off at 1 oh with a 180K Resister in Parallel

I said bleed because It has a CAP and it dose effect it and make it a big brighter, but when it comes to tone controls you are just shopping off the ends. never seen 15nF come up.. people always seem to go 47, 22 and 10nF I say 100nF some times because i found that in my First bass (Bit shocked...

I did that megatone, but I used two hexadecimal switches and a push pull tone pot to switch between the two. But both use the same caps but only one resister in parallel with the caps. It dose 220p to 100nF in about 200pF step up 9bit switching Just need to stream line it more so only uses one...

I wonder if they mean a bleed on the volume. It can just be a cap But that is a treb bleed

I did a Multi Tone that has a Range of 200pF-100nF i think I do find it hard to hear a difference between 47nF and 33nF Feel that feeling for bass is more 100nF, 47nF and 10nF more of a jump between roll offs Invalid Link Removed

Depending on what values you want .. I guess Invalid Link Removed Now down to Values, if you can find out what values they use, might be able to get some thing simlar I can get a 2P12T Switch but its BIG talking a Inch PLUS

I can only think better pick up would get'what you want, maybe music man type an a splinter when you want a softer'jazz sound. As you got your own printer you could easy make the pick guard for such a thing

I think they were after a'figure so to know if the pick up was a copy or not If is possible to add DC resistance by adding lumps of metal

Well that's not a blend as I know it 1. Ground 2. - neck 3 + bridge So move yellow over to the free lug

Easy to take apart but hand with care, the arms CANT BE BENT, other wise its murder to put back. And cutting tracks, think before cutting. If we are doing a Volume Pot that uses all 3 lugs of the POT, i would cut on the Inner circuit just near where the Lug comes in to the circuit, and the...

http://www.thedivinenoise.com/divine-noise-straight-cable.html I'll have to read more on this,

Link Removed Few different types of pots I'm just reading it .. I think yours is a audio taper, well that's what it says on your like,

Pot lugs should go Input/output/ground Am thinking its a log pot

To take out the selection switch, ever two push pull pots (two switches under two of the pots) Could have a blend pot and do it that way You can use volour pot as a switch, I think. Crazy way of doing things But a pot is a outer ring (more of a C look) from the two ends and a inner ring for...

Yes that is how I've shown it (i think i should of shown it Neck Middle Bridge.sorry) you can connect the same colored dots together but like Drinking.. YOu cant MIX your connections

May i suggest MyiBidder Auction Sniper for Ebay. i had the Demo on Android ad got a item for £10 less than what my max bid was, so i brought the software .. nice thing Takes the Power of .. Ill just bit a bit more .. out of your hands and can bit 3seconds before end also stops people boosting...

i was working on it as you typed :P I tried to show it as you did than a Rotary It should give you want you want N/M N/B M/B N/MB Link Removed

you just linked M to B always then (basically shorted them out together) the Switch is the only thing keeping the Single apart would need 3P4T Link Removed Were I have Black Dots/PreAmp1/PreAmp2 you just hooked them up the PreAmp Neck/Bridge

looks sexy tho.. i guess its DC Resistance will be high with all that metal around it

well that would be ok with the Switching you been talking about. You could have the 2P6T http://www.ebay.com/itm/2P6P-Double-Pole-Six-Position-Rotary-Wafer-Switch-/121139803144?pt=LH_DefaultDomain_0&hash=item1c347eb408&afsrc=1 What is half the price, im not sure about postage as im in the...