• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Barber Linden EQ • New small form factor

Just bought one from Reverb today, it's a version 1, i wanted the compact one.
I will wait untill i get lucky, at least for now i can enjoy it.
The only differences is the old one has a push/pull bass knob with the same function as 2 of the 3 "input toggle" switch settings on the new one, and the contour toggle switch on the new one gives one more setting. So basically one new setting on each "switch" (4 total on the old one, 6 on the new one) and the smaller form factor.

I did a lot of testing, and I always fall back to one setting that immediately feels right, set-and-forget. Checked the schematic and manual against the schematic of an Ampeg B15, and that setting was the pure B15 tonestack, which is also available on the older version. For me, the extra settings of the new one have no value, I just want that pure B15 toneshaping.
 
I did a lot of testing, and I always fall back to one setting that immediately feels right, set-and-forget. Checked the schematic and manual against the schematic of an Ampeg B15, and that setting was the pure B15 tonestack, which is also available on the older version. For me, the extra settings of the new one have no value, I just want that pure B15 toneshaping.

Thanks for the info, thats exactly what i was looking for but wasnt quite sure, you just confirmed it.

Merci !
 
The only differences is the old one has a push/pull bass knob with the same function as 2 of the 3 "input toggle" switch settings on the new one, and the contour toggle switch on the new one gives one more setting. So basically one new setting on each "switch" (4 total on the old one, 6 on the new one) and the smaller form factor.

I did a lot of testing, and I always fall back to one setting that immediately feels right, set-and-forget. Checked the schematic and manual against the schematic of an Ampeg B15, and that setting was the pure B15 tonestack, which is also available on the older version. For me, the extra settings of the new one have no value, I just want that pure B15 toneshaping.

If you don't mind sharing, what is the setting you use for the "pure B15" ?
 
  • Like
Reactions: Jim C
I have used my Linden eq with my Effectrode LA-1A the last 2 times I have used IEM, and I gotta say it is probably the best IEM tone I've had. I prefer the left switch to the left with a J Bass, and the left switch to the right (mid cut?) with a P bass, but would be more than happy f I left the switch to the left all the time.

Nice! I'm using the LA-1A > Linden combo as well and it just slays when paired with a Quilter BB800.
 
I have used my Linden eq with my Effectrode LA-1A the last 2 times I have used IEM, and I gotta say it is probably the best IEM tone I've had. I prefer the left switch to the left with a J Bass, and the left switch to the right (mid cut?) with a P bass, but would be more than happy f I left the switch to the left all the time.

I'm usually doing the opposite, the left toggle at hard left for a P and at the centre spot for a some mid-cut on a J :bassist: Right switch is handy for cutting some low end when I'm using the amp late at night at home and try to keep the sound from travelling.
 
Mr Barber talking about the Linden EQ.


This really is a great pedal. I like it best into a Solid state amp that's set pretty flat. I am going to try it today with a Class D Mesa TT800. I am actually not counting on it being great because there's already so much going on with the TT's EQ. I'll try to report back here on my impressions of it.
 
This really is a great pedal. I like it best into a Solid state amp that's set pretty flat. I am going to try it today with a Class D Mesa TT800. I am actually not counting on it being great because there's already so much going on with the TT's EQ. I'll try to report back here on my impressions of it.

It's high on my list of all time greats. With my Queen Bee and Studio Bass Compressor, it's an excellent little package.
 
Last edited:
14762FC5-5DE5-48D7-9591-B9B57C30A15F.jpeg

Linden with a Mustang, palm muting with a pick sounds great. Not as warm as my previous Fliptop tube head but lots lighter!
 
The Linden is completely clean, though, is it not? How do you guys get your drive?

I have used my Linden eq with my Effectrode LA-1A the last 2 times I have used IEM, and I gotta say it is probably the best IEM tone I've had. I prefer the left switch to the left with a J Bass, and the left switch to the right (mid cut?) with a P bass, but would be more than happy f I left the switch to the left all the time.

Nice! I'm using the LA-1A > Linden combo as well and it just slays when paired with a Quilter BB800.

View attachment 4431725
Linden with a Mustang, palm muting with a pick sounds great. Not as warm as my previous Fliptop tube head but lots lighter!
 
Just a share. Precision Guitar in Phoenix AZ makes pickguards on eBay and reverb. He traced my D5 and 4 string p5r. I had a positive experience with Jim.

If I had a different Sire model I wouldn't hesitate to send him a tracing or a pickguard to get one made.

1000009750.jpg

1000009749.jpg
 

Attachments

  • 1000009804.jpg
    1000009804.jpg
    3.6 MB · Views: 17