TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Hi there. If you don't mind sharing let me know about the build, I have 2 x 12's I could use in a good cab too!Second gig with the Veyron last night. This time using my 2x10 and 1x15 cabs instead of the 2x15 Acoustic. I got to the club and got everything setup and got ready to prep my basses. Plug in the first bass, go to tune and PROBLEM! No signal to the tuner! So I un-mute the amp and check the volume. NO SOUND FROM THE AMP! Oh CRAP!
Then I realized that my guitar cable was not plugged all the way in on the front of the amp. Silly me. Once my error was corrected everything worked great. This combination of cabs is slightly brighter than the 2x15 and still produced plenty of sound and again, the amp never seemed like it was working hard at all.
These cabs have tweeters and I usually have the turned off, but someone earlier had asked about hiss from the tweeters, none that I could hear. The amp is very quiet when not being played.
Now I need to get a workshop so I can build a nice high powered, light weight 2x12 to make this rig even easier to move.
Question for you: CAN YOU HEAR THE FAN WHEN YOU ARE NOT PLAYING ? Some amplifiers have a fairly loud fan noise when idle and if you are playing in closed quiet environments, it can be TOO loud.
Just ordered one (from Full Compass....they are in stock there while Sweetwater, etc. are waiting for a new shipment). Should arrive next Wed or Thurs.....
Hi there. If you don't mind sharing let me know about the build, I have 2 x 12's I could use in a good cab too!![]()
Yep. You learn not to do this after using ACME's with a ton of "headroom" pushing them.About the only downside I'm predicting is there will likely be a slew of blown drivers in it's wake from folks who don't pay attention to what they're doing.