• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Club Sadowsky!!!

Played this today, At Huber and Breese in a Motown Suburb. They just became a Sadowsky (Warwick) dealer got in 4 and already sold 2 in a week. I was thoroughly impressed it was certainly the equal of the RV5 Metro I owned. The Germans build them as good as the Japanese! What do you know? :D
119596262_10222516161988886_6886975398739461656_n.jpg
 
Played this today, At Huber and Breese in a Motown Suburb. They just became a Sadowsky (Warwick) dealer got in 4 and already sold 2 in a week. I was thoroughly impressed it was certainly the equal of the RV5 Metro I owned. The Germans build them as good as the Japanese! What do you know? :DView attachment 3989766
If only more Americans knew how to wear masks.:rollno:
 
Here a my two Sadowsky NYC Basses.

The white J is a what I believe to be a 1992 solid body with EMG pickups. This workhorse bass has been to most of my shows. It’s perfect. I purchased it used and have owned this bass since mid 90’s.

The P Bass is a Vintiquity model. After a long search I acquired this bass in early 2020. P Bass Perfection !
96B7D67D-8357-425C-A262-71DE3588B326.jpeg
 
Last edited:
With a little advice from @deepestend, here's how to fit Jazz Bass knobs on your UV bass, or any bass with a Sadowsky preamp:

8F2B2B10-3A13-4878-ACB2-E7CE8D5A19D2.jpeg


I used standard Fender replacement knobs: I bought two packs of 3 (2x vol, 1x tone) and I bought the LOWER concentric knob that Fender sells. You can use the tone knob for the treble concentric shaft. They're not exactly bakelite, truth be told, but they look and work fine. My bass is a Metro, so that meant 6mm shafts, not the 1/4 ones you get on the NYC basses. Every Jazz Bass knob I searched for was also 1/4" (Maybe they're out there @ 6mm) so I also bought a pack of brass sleeves you can get at Allparts (you can see one in the photo below). The only tool I needed for this was a reamer (this one was "Amazon's Choice") to grind the concentric knob's hole up to 8mm to fit the preamp's lower concentric shaft, and my soldering vice to hold the knob in place.

6F510EA6-0BE8-4BB1-A2EE-101124358604.jpeg


Super easy.
 
With a little advice from @deepestend, here's how to fit Jazz Bass knobs on your UV bass, or any bass with a Sadowsky preamp:

View attachment 3989883

I used standard Fender replacement knobs: I bought two packs of 3 (2x vol, 1x tone) and I bought the LOWER concentric knob that Fender sells. You can use the tone knob for the treble concentric shaft. They're not exactly bakelite, truth be told, but they look and work fine. My bass is a Metro, so that meant 6mm shafts, not the 1/4 ones you get on the NYC basses. Every Jazz Bass knob I searched for was also 1/4" (Maybe they're out there @ 6mm) so I also bought a pack of brass sleeves you can get at Allparts (you can see one in the photo below). The only tool I needed for this was a reamer (this one was "Amazon's Choice") to grind the concentric knob's hole up to 8mm to fit the preamp's lower concentric shaft, and my soldering vice to hold the knob in place.

View attachment 3989888

Super easy.
Yea love the fender knob as well..
 
With a little advice from @deepestend, here's how to fit Jazz Bass knobs on your UV bass, or any bass with a Sadowsky preamp:

View attachment 3989883

I used standard Fender replacement knobs: I bought two packs of 3 (2x vol, 1x tone) and I bought the LOWER concentric knob that Fender sells. You can use the tone knob for the treble concentric shaft. They're not exactly bakelite, truth be told, but they look and work fine. My bass is a Metro, so that meant 6mm shafts, not the 1/4 ones you get on the NYC basses. Every Jazz Bass knob I searched for was also 1/4" (Maybe they're out there @ 6mm) so I also bought a pack of brass sleeves you can get at Allparts (you can see one in the photo below). The only tool I needed for this was a reamer (this one was "Amazon's Choice") to grind the concentric knob's hole up to 8mm to fit the preamp's lower concentric shaft, and my soldering vice to hold the knob in place.

View attachment 3989888

Super easy.
Thanks for posting this!
 
Beautiful bass but the knobs are terrible IMO. Much rather have the Sleek Sadowsky style knobs.
Maybe, “not my particular taste” (if he had actually asked for opinions) would have been a little more diplomatic. just trying to help keep this one of the last civil and intelligent places on the virtual and non virtual planet. Imo of course.