• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Dingwall Owners Club

Batteries are ok. It is happening amplified. I think I might have found the culprit, looks like the gain on my compressor must have been turned up by accident when I was fiddling with settings on other pedals, so the lows from my 3 lowest strings were clipping my preamp. Total coincidence that it coincided with the string change.

Thanks for the reply!

No prob - bullet dodged! :p
 
“They can rebuild it; they have the technology”

124ACD9D-D015-4B17-8242-9C6DA469F3D1.jpeg


50556E7B-9178-478B-9B82-B99207EE443F.jpeg


My 2021 birdseye board Z3-6 turned into this recently, just in time to put it under (next to) the tree. It’s now a smoke inlay wenge board. Thank you @Sheldon D. and team for the new neck!

DFC6AEED-8E91-4E20-A752-1FCC7E80DAF8.jpeg
 
  • Like
Reactions: geggy spoiger
Beauty!!
That BEM had some kind of an issue right?? Too bad, it was a gorgeous piece of wood. The new results look amazing also!!

Yes, the birdseye was considered the problem for my original neck not being stable. Even though it’s not what I ordered originally, I think the new neck with inlays suit the overall look better!
 
This wenge neck is may favorite neck I have. I also think it looks absolutely amazing with the trans white finish. Here is a great picture or two from the previous owner.

View attachment 4918135 View attachment 4918139 View attachment 4918142

I sure love me some free range bass pics. That last one reminds me of the Windows XP background...really great pic. Never really liked white finishes but that is gorgeous....Dingwall nails it again!

OK, tech question. The only settings I use on my ABZ is the neck pickup and the neck+bridge in parallel. So, it seems I could use this 2X switch I have and convert this D-Roc to essentially a 2 pickup model.
I have a new NG3x switch that I don't have any plans for and was probably going to offer up on here eventually so if you (or anyone else) is interested lmk.
 
  • Like
Reactions: NOLA Bass
  • Like
Reactions: geggy spoiger
I sure love me some free range bass pics. That last one reminds me of the Windows XP background...really great pic. Never really liked white finishes but that is gorgeous....Dingwall nails it again!


I have a new NG3x switch that I don't have any plans for and was probably going to offer up on here eventually so if you (or anyone else) is interested lmk.

Message sent.
 
That’s gorgeous! I love the BEM on my Z so I hope it stays stable (good so far). I know I would be handled if somethings happens and again, great to see how yours turned out!

“They can rebuild it; they have the technology”

View attachment 4918786

View attachment 4918791

My 2021 birdseye board Z3-6 turned into this recently, just in time to put it under (next to) the tree. It’s now a smoke inlay wenge board. Thank you @Sheldon D. and team for the new neck!

View attachment 4918795
 
  • Like
Reactions: geggy spoiger
I have an Afterburner II of similar vintage, only my neck is bubinga. At the time if I remember correctly, Sheldon recommended a clear shoe polish, so that is what I used. I only did it once.

I doesn't seem to be in need of regular maintenance on other words. My fingers has left an oily residue around the volume knob and in some places on the top the wood has taken on a brighter nuance, this is visible on my avatar beneath the neck pickup. Are these the same kind of things that made you apply shoe polish?
 
So this was full neck swap, not a re-finish?

Hi, yes this is a completely new neck build. Now wenge/wenge. The original wenge/BEM is still with Sheldon’s go to guy in Sydney who handled my warranty issue with Sheldon.

That’s gorgeous! I love the BEM on my Z so I hope it stays stable (good so far). I know I would be handled if somethings happens and again, great to see how yours turned out!

Thanks! I’m stoked with how it matched up with the redwood top. I’ll miss the birdseye but this came out great. Hoping yours remains issue free!

Wow. Both necks look stunning. But that smoked wenge is killa!

It really is sweet. There’s also roasted flamed maple in the inlay that’s really dark and not really visible in my phone pic, I’ll have to dust off the dslr and get some proper snaps of the big boi soon.
 
I doesn't seem to be in need of regular maintenance on other words. My fingers has left an oily residue around the volume knob and in some places on the top the wood has taken on a brighter nuance, this is visible on my avatar beneath the neck pickup. Are these the same kind of things that made you apply shoe polish?

I don't sweat when I play and I don't have a lot of acidity in my hands, so my strings last a long time. My bass wear and tear is very gradual/minimal as a result. In general, I can see a little bit of gunk (for lack of better word) on the fretboard, but that is over a long period of playing time.
 
  • Like
Reactions: jellew
  • Like
Reactions: geggy spoiger
Stunning bass. Both necks were gorgeous, but I think that darker board with that bass is an improvement (and that is saying something).
I agree - the darker fretboard does a better job to tie in the dark hardware. The BEM was stunning, but this looks better to my eye. And the smoke inlay design just took the thing to a whole new level. I'd have a hard time taking that piece of art out of its glass case.