• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Extremely low frequency cabinets / drivers? 20hz?

The thing I find most awesome about my current Quake and setup isn't really the extended low "reach", but in playing more in the usual frequency range, but higher up on the neck, around the 7th fret, it's really very interesting being able to get substantial fretless mwah tone one those deep notes. That is, playing E1 at the seventh fret of the A string has very similar tonal qualities to E2 played in that position on a normal bass, but the entire harmonic structure is of course shifted an octave down. Similarly going "up the neck", really gets a singing tone, but much deeper in timbre and tone than a normal fretless (of course).

I played one of Skip's E0 basses at a GTG here, though about 8 kilowatts worth of rig + PA or so. None of it was optimized for his bass, so when I got to about the 12th fret on the E string things got much louder and fuller sounding, a very interesting thing to experience for the first time. I didn't really get to grips with how I might leverage that most musically, as the ductwork in the club was threatening to come down...Link Removed

The Hathor 1855 that Skip played his 13Hz bass through at the Seattle GTG last year seemed to work a lot better though, even with "only" 1000 watts driving it.
 
four acme 2x10's and a 2 ohm stable amp? I doubt you'd get much 20hz out of it but it'd reach really low and not be crazy expensive used.
I bought an acme 2x10 and now I find myself running a high pass filter to get rid of some of those lows I thought I wanted.:meh:
I bet the quake would be a really fun instrument to play though!
 
Duke's second experiment on this page could fit the bill
A couple of big experimental bass cabs

The jury's still out on that cab, and it's not intended for production, but it might be a useful data point one way or the other. bholder apparently doesn't need the relative portability of that cab, which added to its cost.
 
Last edited:
The jury's still out on that cab, and it's not intended for production, but it might be a useful data point one way or the other. bholder apparently doesn't need the relative portability of that cab, which added to its cost.
Yeah, I wouldn't say no to the portability, but it's not an immediate requirement. I do own a cargo van, though, just in case. (That's how the Accugroove got home from the shipping warehouse.) :)
 
Ha! Guess I should've read further into that link before posting it. Was just looking for something other than wikipedia for a change.

At least it explains the voices in my head and these inexplicable sudden mood changes. ;)
Hmmmm. Now I've been attributing those to that haunted bass I bought, but you might be onto something there. o_O
 
Hmmmm. Now I've been attributing those to that haunted bass I bought, but you might be onto something there. o_O
how is the ghost-inhabited G&L ?
Looked great in the pictures, now tell us how's the playability?

Bet it virtually plays itself.

How's the tone?

Bet it's Wicked!

:P
 
Last edited:
Too bad Jaquox1111 or whatever his user name was got himself a banhammer....
I'd expect that you are looking for something that is a futile effort. Most eq "out" those frequencies with high pass filtering. Many stop their power amps at 50 for the subs.
Bear in mind what your "hearing" from a note that low is the harmonics not the fundamental.
Cabs that extend that low are able to do it but without much efficiency due you the amount of power to produce that low of a note at a reasonable volume.
Good luck though!
I do remember him being one of the others interested 10+ years back. And yeah, I understand about the efficiency trade-off.
 
how is the ghost-inhabited G&L ?
Looked great in the pictures, now tell us how's the playability?

Bet it virtually plays itself.

How's the tone?

Bet it's Wicked!

:p
"I still see it in my sleep...... .....and I don't sleep all that much anymore." :wideyed::nailbiting::wideyed::eek:o_O

It's actually a wonderful sounding and easy playing bass - MFD FTW! My 1st G&L, doubt it'll be my last. ;)
 
:) it wont...
Suggest you look at a press be instrument next.
If you get one from the 80s... I helped build it ( worked there then)
Cool that you worked there - but I'm not clear on which instruments you mean from the 80s? What models?
smiley-shocked028.gif
 
Cool that you worked there - but I'm not clear on which instruments you mean from the 80s? What models? View attachment 581755
Sorry typing on phone stupid autocorrect. I was trying to say pre BBE.
Look at an SB2 or SB1.
ASAT are cool but they neck dive a bit.
If you dig a music man vibe take a look at an L1500
Always look for translucent colors the wood is better. Ash or mahogany flavor for days.
One of my faves was an El torro with a kahler tremelo
A so ugly it's cool model was the interceptor.

They are rare but grab an l2000 with an ebony neck and a mahogany body tonal bliss....
 
  • Like
Reactions: bholder
Sorry typing on phone stupid autocorrect. I was trying to say pre BBE.
Look at an SB2 or SB1.
ASAT are cool but they neck dive a bit.
If you dig a music man vibe take a look at an L1500
Always look for translucent colors the wood is better. Ash or mahogany flavor for days.
One of my faves was an El torro with a kahler tremelo
A so ugly it's cool model was the interceptor.

They are rare but grab an l2000 with an ebony neck and a mahogany body tonal bliss....
Ah, yes, that makes sense now, and yes, thanks, I'm looking. ;)