• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Fender Rumble Club

No it wasn’t. I had my suspicions when it was two days late and saw the box was big enough for two. The spot where they cut the original call tag off the old carton and taped it to the new one was a dead giveaway too. FedEx did, in fact, fess up. Firing it up this morning. I’m not the type to get all bonkers over the box, as long as the contents survived unscathed. Contrary to a recent long winded thread around here

I hope yours fires up OK.

FedEx may have a problem shipping these Rumbles. My "first" one was shipped by them but I was going to be out of town when it arrived. I called FedEx and asked them to hold it at a local FedEx office for pickup. When it arrived, I received a call from the local office saying the box was seriously damaged and recommended that I/they refuse delivery. I called MF and they handled everything, even sending a replacement before they had received the original one back!
 
View attachment 2974472:bassist::bassist::bassist: View attachment 2974476 View attachment 2974478 View attachment 2974479 I got my 500 combo today! It sounds great and has been rattling my basement like a snare drum!

Please take this as intended, but did you buy your Rumble 500c factory refurbished? Mind you, I got mine in 2014 I think it was, and the factory shipping box had the Rumble logo all over it, and it was clearly marked Fender Rumble 500 all over the outside of the box. The foam blocking looks a bit different too.

Not saying it is, just wondering if they are doing refurbs, or if maybe they changed the shipping box and packing foam to save $$....
 
And I'm picturing people reading these suggestions and damaging their Rumbles thinking it's easy.

Well, if this sort of thing is beyond a person's knowledge and abilities, then they definitely shouldn't attempt it... I've repaired a few amps in my time, and have been inside a Rumble combo - and know *I* can handle such a task, but that doesn't mean everyone can do it.... The last thing in the world I want to do is talk someone into damaging their gear...
 
Welcome Rumbler #887! You might want to adjust your EQ there. Those settings will throw mud about 300 yards. Rumble on!

Oh good heavens. I almost drenched my monitor when I read that. Perfect descripton!
 
Are the 10" speakers in the 410 different than those in the 210? 2ohm vs 4ohm? I'd like to add a 210 to my 500 combo but also have an eye on the Bassman 800 head for the future. I was curious as to whether I could just buy the 410 now and disconnect 2 speakers to couple with the combo, and then be able to reconnect and use as a 410 in the future when I have a separate head. It's only a $50 spread from the 210 to 410.
 
Hey guys,

Anyone have a problem with the distortion on their rumble farting out and/or clipping? I just got a rumble 40 and whenever I turn the distortion and gain pretty high (not max, mind you) it makes a weird clipping sound (see below)

Note that this happens even at a very very low volume. I never cranked the thing yet. No problem on clean sound.

Tried a different bass and a different cable.



I'd appreciate any advice!


I'm certainly no expert, but from my prior experience with amps over many years it sounds like a de-laminated voice coil. I'll wait for someone else to chime in, though.
 
Please take this as intended, but did you buy your Rumble 500c factory refurbished? Mind you, I got mine in 2014 I think it was, and the factory shipping box had the Rumble logo all over it, and it was clearly marked Fender Rumble 500 all over the outside of the box. The foam blocking looks a bit different too.

Not saying it is, just wondering if they are doing refurbs, or if maybe they changed the shipping box and packing foam to save $$....

It was purchased new from Sweetwater and they told me that it would ship in a Fender box. It was backordered when I ordered it so unless Fender sent them a refurb, it’s a new one. I haven’t seen any sign that it was a refurb: it looks brand new. My guess is that they have changed their packaging in the four years since you purchased yours? Or Sweetwater changed the packaging when they received it? They definitely opened it to put in the invoice and candy in the box.
 
Please take this as intended, but did you buy your Rumble 500c factory refurbished? Mind you, I got mine in 2014 I think it was, and the factory shipping box had the Rumble logo all over it, and it was clearly marked Fender Rumble 500 all over the outside of the box. The foam blocking looks a bit different too.

Not saying it is, just wondering if they are doing refurbs, or if maybe they changed the shipping box and packing foam to save $$....

I think it's just a cost saving measure. Rather than have separate shipping boxes for each model, it makes sense to have a multi-use, generic box labeled "Fender". Different foam blocks could account for minor differences in sizing IMHO.

Edit: especially since the introduction of the Studio and Stage models with similar measurements to prior models.
 
  • Like
Reactions: Moody Tuner
If anyone is curious:

The head is easy to open. The pot is soldered in. Sprayed at the top but It's really hard to know if anything really got in there. I think it just drizzled to nowhere but it wasn't difficult. I'm not bothering to get the face detached or remove the pot. It's so easy to just crank the pot.

FYI: The gain and volume pots are the same part. If you ever need a part number, just call Fender and they pull up the drawing and give you the #.

B20D893A-7E9B-4568-9A5D-17683F6C800F.jpeg
 
If anyone is curious:

The head is easy to open. The pot is soldered in. Sprayed at the top but It's really hard to know if anything really got in there. I think it just drizzled to nowhere but it wasn't difficult. I'm not bothering to get the face detached or remove the pot. It's so easy to just crank the pot.

FYI: The gain and volume pots are the same part. If you ever need a part number, just call Fender and they pull up the drawing and give you the #.

View attachment 2975461

Thanks for that.

I agree with you that "it's so easy to crank the pot". Now, when is it crab season again ? :bag: :eyebrow:
 
  • Like
Reactions: rodl2005
I hope yours fires up OK.

FedEx may have a problem shipping these Rumbles. My "first" one was shipped by them but I was going to be out of town when it arrived. I called FedEx and asked them to hold it at a local FedEx office for pickup. When it arrived, I received a call from the local office saying the box was seriously damaged and recommended that I/they refuse delivery. I called MF and they handled everything, even sending a replacement before they had received the original one back!
Everything seems to be a go. I’ll rehearse with it Tuesday but I’m really liking what I’m hearing.
 
Hello Rumble users!

This is my first bass amp, a Fender Rumble 100v3.

348pmig.jpg


It is mostly for use at home. With the master volume at 1 o'clock, it is loud enough for me. Still checking out the presets. Hard to settle for 1 setting, they all sound pretty good for different things. The OD is not too bad, though I can see myself trying some other OD pedals in the future.

Lots of features for its price, lightweight, nice sound. I think this series is a winner.
 
I just ordered a second 210v3 cab for my 500 head....now i'll have 4 vertical 10's, looking forward to test driving at the next gig.

Its in...finally got a second 210 after a year or so of contemplation.
What you don't see is a lonely and covered GK, along with a Stingray, in the corner....only Fender...at least for now;)
 

Attachments

  • R2-2 copy.jpg
    R2-2 copy.jpg
    870.5 KB · Views: 23
Last edited:
Its in...finally got a second 210 after a year or so of contemplation.
What you don't see is a lonely and covered GK, along with a Stingray, in the corner....only Fender...at least for now;)
Fwiw, I think Stingray and Bongo both sound great through Rumbles...there is a bump in low mid heft or something that (all of this imho/ime) that compliments the single MM tone.
Looking forward to trying my Jack Casady through one this summer...
 

Latest posts