• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Fender Rumble LT25, Studio 40 & Stage 800

Rumble Stage 800 in the wild:

Way to ROCK, riccy ricardo! 🥳

Please share! What preset and/or settings did you use for this tone? I'm others will want to duplicate it!! 🤩
It's a fairly simple preset that I called Bassman 300 Pro.
The signal chain is as follows:
Jazz bass at full blast + Rumble Stage 800 with Line Out configured as Stereo output (two Balanced line outputs to FOH)
  • Simple Compressor, Mid
  • JC Chorus, Stereo
  • Bassman 300 Pro Amplifier:
  • 4x10 Pro Cabinet
  • Gain 2.8; Volume 8.9; Treble 5.5; Middle 5.5; Mid Freq 700 Hz; Bass 5.5
  • Blend 2.8; Deep Off; Notch Off; Bright Off; Compressor Off; Noise Gate Low; Gate Position Pre; Sag Matched; Tube Bias 0.0.

So, for that tone, you built your own preset named Bassman 300 Pro using the Bassman 300 Pro amp model!?! Right? 🤪
 
  • Like
Reactions: ricardol
So, for that tone, you built your own preset named Bassman 300 Pro using the Bassman 300 Pro amp model!?! Right? 🤪
Correct!:)
The way I try to keep my life easy is this:
  • I prefer switching between presets rather than turning effects on and off.
  • The stock presets are shifted in the list from number 31 onwards and retain their original settings.
  • The first 30 presets are all created by me and have identical volume so you won't notice significant volume changes when switching between them.
  • During a show, I use about 4 presets, located among the first nine in the preset list.
  • Each bank of three presets starts with a clean-sounding amp model without effects.
 
It's a fairly simple preset that I called Bassman 300 Pro.
The signal chain is as follows:
Jazz bass at full blast + Rumble Stage 800 with Line Out configured as Stereo output (two Balanced line outputs to FOH)
  • Simple Compressor, Mid
  • JC Chorus, Stereo
  • Bassman 300 Pro Amplifier:
  • 4x10 Pro Cabinet
  • Gain 2.8; Volume 8.9; Treble 5.5; Middle 5.5; Mid Freq 700 Hz; Bass 5.5
  • Blend 2.8; Deep Off; Notch Off; Bright Off; Compressor Off; Noise Gate Low; Gate Position Pre; Sag Matched; Tube Bias 0.0.
Just tried these settings out on my Studio 40. Liking it so far (although the chorus seems a bit strong). Will set this up on my Stage 800 and see how it sounds during our next band rehearsal (no gigs in June, so no rehearsals till 6/22). Thanks for sharing these!
 
  • Like
Reactions: G-Dog and ricardol