• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

G&L Club Part 7

So I did a test with my SB-2. Where in the past I've had basses (including my LB-100) that buzzed even through a battery powered amp and therefore not plugged directly into an outlet, the SB-2 only buzzes when plugged in to my amp. It's quiet through my Tascam GT-R and my Pignose Hog30. I'll get it shielded tomorrow.
 
So I did a test with my SB-2. Where in the past I've had basses (including my LB-100) that buzzed even through a battery powered amp and therefore not plugged directly into an outlet, the SB-2 only buzzes when plugged in to my amp. It's quiet through my Tascam GT-R and my Pignose Hog30. I'll get it shielded tomorrow.

My L2500 picks up radio sometimes. :dead: Maybe I need a tinfoil hat.
 
I get hum from the bridge pickup, but that normal constant hum that doesn't go away no matter what you do. It's the buzzing that stops and starts when you take your hands off the strings that drives me crazy. But, she'll get shielded and be as quiet as Helen Keller's pet mouse.
 
  • Like
Reactions: R&B
I get hum from the bridge pickup, but that normal constant hum that doesn't go away no matter what you do. It's the buzzing that stops and starts when you take your hands off the strings that drives me crazy. But, she'll get shielded and be as quiet as Helen Keller's pet mouse.

Also, while you're at it, check your bridge grounding. The "hands off strings" buzz is a symptom of poor string grounding. String potential is grounded by the bridge connection to ground, usually a black wire from under the bridge to the tone pot chassis.
 
  • Like
Reactions: R&B
Also, while you're at it, check your bridge grounding. The "hands off strings" buzz is a symptom of poor string grounding. String potential is grounded by the bridge connection to ground, usually a black wire from under the bridge to the tone pot chassis.

It's with my tech. I'm sure he'll check that. But I had the exact same problem with an LB-100 and shielding fixed it 100%.
 
Hmmm. My '97 SB-2 hums from the bridge pickup at certain volume settings but the neck pup is quiet as a mouse. A mouse that roars!!! :D


That's not hum, that's...."tone".

I'm on my eighth one, they all do that. May be problematic for recording situations, but live.....who cares?
 
anybody using TI Jazz flats.

I am getting very tired (and frustrated) with 5 string sets where the B string thuds, is a lot deader than the other strings, has like 1/3 the sustain of the other strings.

I gave up with string through on my m2500 and mounted GHS pressure wounds and now DR Fat Beams top side with good results.
I just picked up a used L2500 and wanted to use some kind of flat or half wound through body, but so far GHS Brite Flats (that on the other 4 strings sound great and can take adavantage of all the L2500's tone manipulation) and D'addario half wounds (which have worked on a Yamaha BB425) -- both have the thuddy dead B string.

So some say the TI flats as expensive as they are solve all such problems
I'd like to get some testimony before I commit. I do have GHS precision flats on order.