• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

G&L Club Part 7

I've been experiencing hand problems and only a true Fender P neck works.
I have a couple for the 70's and would like a new bass with a great playing, stable, neck.
Pleck'd seems like the way to go.

My Sandberg VS is awesome but the neck is too thin (width and front to back).
Same with Lakland 4401 / 4402.

Does the LB100, L2K's or any other G&L have a similar 1 5/8" nut and a deep, "baseball" radius like the 70's Fenders?
Seems like the world has gone to mostly 1 1/2" nut size be they P, J, or other pup configurations.

G&L makes several necks for various basses stock...but they can be ordered with whatever neck you want in any combination...

USA Bass Options
 
Hey Dude, glad to see you again! Well, after our 2006 debacle with repeated defective necks sent on new my custom order, I'm giving some thought to maybe giving G&L another try. As much as the 3 defective necks they sent me in 06 ticked me off, those MFD humbuckers are truly something special. I was in contact with a custom shop dealer, the other day and I might order something like this with the MFD Humbuckers:



Hey MM - am I to understand you are thinking of ordering a custom G&L "Jazz" V with L2000 MFD pickups? I didn't think they would do this but man I would love such a bass!!!
 
I have a story....it may be familiar....

I've recently been playing some of my other basses (a parts PJ with Dimarzio DP126 set and a Fender Aerodyne with Dimarzio Heavy Drive JJ pickups). Both have high output, distinctly voiced pickups.

Had always thought both basses lacked a certain something - hard to say exactly what but spent some time with both basses in conjunction with EQ/overdrive on my pedal board and became happy with how I had both basses sounding both through an amp setup or direct to a mixing board. My L2000 basses have become a little unloved for maybe the last month or so.

Last night I thought I would have a blast with the G&Ls. They simply sound incredible.

I've said this several times - the G&L simply sounds perfect to me, and I can get tones I use from each pickup config...(neck, both, bridge). I rarely engage the preamp - it's mostly series with bass and treble dialled, then whatever pickup I need. The only thing I don't have on either of my basses that I think I'd like to look into is K-mode.

G&L MFD humbuckers have ruined me.
 
Now if we can get an ASAT as a 5 string, L2500 electronics then I'm in trouble. Passive would be fine, I never use the pre in Sparkle.

They actually have done a few of these. I think I have seen two of them for sale ever and they always bring quite a bit of money for a used G&L. They labeled them as ASAT B5. According to bassesbyleo, roughly a dozen were made at an artists request. Artist was in the U.K., but there are a few now floating around the US.
 
Does anyone know where to get one of the L-5000 pickups? G&L says they don't make/ sell them any longer.
upload_2020-1-14_8-18-24.png
 
They actually have done a few of these. I think I have seen two of them for sale ever and they always bring quite a bit of money for a used G&L. They labeled them as ASAT B5. According to bassesbyleo, roughly a dozen were made at an artists request. Artist was in the U.K., but there are a few now floating around the US.
I've seen a couple examples. Yes too expensive. Also not Marty Bell flaked !
Just might have to Bastardize one on my own. L2500 pup in the bridge position, with a Lynx, El Toro, Interceptor ... Dual coil close to the Neck.
Top mount control plate, Freeway strat super switch , ( 10 way pickup, coil, inner/ outer series OMG , in out phase)
Volume ( p/p lpf cap and treble bleed) + PTB circuit on a stack.
No pre all passive.
 
Now if we can get an ASAT as a 5 string, L2500 electronics then I'm in trouble. Passive would be fine, I never use the pre in Sparkle.

Oh, man...:rollno:

Take an ASAT, add a bigger neck and an extra tuner, and the natural rest position would be with the headstock on the floor! :roflmao: