I would like to get some lighter weight Hipshot Tuners for my T-40. Does anyone know the tuner hole size?
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
I would like to get some lighter weight Hipshot Tuners for my T-40. Does anyone know the tuner hole size?
No, an 11/16" hole is normal for a traditional Fender style 1/2" tuner. The extra is for the bushing.I pulled off a tuner and the hole measures. 11/16". Seems like an odd size.
What pickups are these?This pickup would look sharp on a white T-40 w/ stock black pickguard. View attachment 3065114
I can't do it right now but I'll pop mine off and check this evening after work.Anyone know what size control knobs will fit on the t-40?
I'd call Hipshot. IIRC, they make a bushings in a couple different thickness.So the Hipshot tuners do work but there is some play due to the thinner aluminum bushing they use. I guess I could make them a little thicker with some aluminum tape.
I was sure the "T" stood for TANKWe don't. Welcome the Twilight Zone! What did you think the "T" in T-40 stood for anyway?
Damn! That is a clean T-40. Congrats on the pickuptime to join a new club i guess, just brought this home last night. One owner bought new in 79 by the seller's dad. I asked him if he was sure he wanted to sell the family heirloom...
Came in a painfully original case with a green shag interior and duct tape "protected" exterior. best part is the zip-tie and electrical tape handle. 79 - this was before the black molded cases when they still used a generic case.
Neck is straight to a fault though, pots are pretty clean and switches good. Tuners have tons of play though, is this common? gonna have to look at replacements if this is to be a player.
Stoked to finally get my hands on one though, should be fun
View attachment 5251544 View attachment 5251546 View attachment 5251547
time to join a new club i guess, just brought this home last night. One owner bought new in 79 by the seller's dad. I asked him if he was sure he wanted to sell the family heirloom...
Came in a painfully original case with a green shag interior and duct tape "protected" exterior. best part is the zip-tie and electrical tape handle. 79 - this was before the black molded cases when they still used a generic case.
Neck is straight to a fault though, pots are pretty clean and switches good. Tuners have tons of play though, is this common? gonna have to look at replacements if this is to be a player.
Stoked to finally get my hands on one though, should be fun
View attachment 5251544 View attachment 5251546 View attachment 5251547
no, its quite filthy in fact, decades of grime, pitted chrome, string ground pickups and its fair share of general road wear.Damn! That is a clean T-40. Congrats on the pickup
Awesome! I have the long lost sibling. Also a '79 with the pea soup shag lined case. You will have a lot of fun!View attachment 5251587