murf. that IS nice. clean too.
do you use the octavers on the M9? i'm trying to decide if i like mine.
if you're gonna keep it like that, i'd add another exp pedal.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Post Your Pedalboard 26: Duotriskaidekaphobia
- Thread starter Eric!
- Start date
- Status
murf. that IS nice. clean too.
do you use the octavers on the M9? i'm trying to decide if i like mine.
if you're gonna keep it like that, i'd add another exp pedal.
also... interesting to see some Lytboards getting some love.
i have one of each with the hardcase i think i'm gonna CL... along with that monster that is the Pedalpad MPS XL.
thing is HUGE.
i have one of each with the hardcase i think i'm gonna CL... along with that monster that is the Pedalpad MPS XL.
thing is HUGE.
Got a pic with the board sitting inside the suitcase.
Link Removed
There's a single finger sized hole in the top, above the Distortion II so I can lift the board out since my fingers won't fit along the sides of it. Just lift it up with one finger, and once it's up enough, reach under and grab the whole thing from the sides and that's it.
Link Removed
There's a single finger sized hole in the top, above the Distortion II so I can lift the board out since my fingers won't fit along the sides of it. Just lift it up with one finger, and once it's up enough, reach under and grab the whole thing from the sides and that's it.
Nice board,...a lint roller and an air compressor/canned air duster works wonders on the cat hair. I should know I got 3 cats.
I went to mod my Grunge pedal about 11 o'clock last night...
Damn hex-screws. And somehow, all three of our Allen sets disappeared.
Went and tripped around in dad's shop to search for them. Found the bent rod from my last car! And a new set of rings for a D16 Honda block! But alas...no Allen wrenches. Searched in the fricking garage too, where we last used them, when we kept the Del Sol in there for a long 7 months doing a total rebuild.
But alas... no wrenches. Soo...I'm sure I'll spend TONIGHT after I get a set of wrenches today modding it and see what I can do.
Damn hex-screws. And somehow, all three of our Allen sets disappeared.
Went and tripped around in dad's shop to search for them. Found the bent rod from my last car! And a new set of rings for a D16 Honda block! But alas...no Allen wrenches. Searched in the fricking garage too, where we last used them, when we kept the Del Sol in there for a long 7 months doing a total rebuild.
But alas... no wrenches. Soo...I'm sure I'll spend TONIGHT after I get a set of wrenches today modding it and see what I can do.
Also, the behringer synth is staying. I did a head-to-head between the behringer and the boss syb-5 last night, and the behringer won hands downI may make a whole thread about it at some point.
Please do, i've read a few good things about that pedal and i want to know more.
Also, the behringer synth is staying. I did a head-to-head between the behringer and the boss syb-5 last night, and the behringer won hands down
This is the point I really get interested! Do this thread soon! It's like i'm allready buring, waiting for it.
And all just because I never thought a Behringer pedal could beat anything...*prejudice*
Going fine with the Devi Ever Fuzz?
I went to mod my Grunge pedal about 11 o'clock last night...
Damn hex-screws. And somehow, all three of our Allen sets disappeared.
Went and tripped around in dad's shop to search for them. Found the bent rod from my last car! And a new set of rings for a D16 Honda block! But alas...no Allen wrenches. Searched in the fricking garage too, where we last used them, when we kept the Del Sol in there for a long 7 months doing a total rebuild.
But alas... no wrenches. Soo...I'm sure I'll spend TONIGHT after I get a set of wrenches today modding it and see what I can do.
No worries man, the Digitechs use Torx wrenches. The hex wrenches will only strip the head out.
EDIT::: Del Sol, huh? You must be tiny people.
No worries man, the Digitechs use Torx wrenches. The hex wrenches will only strip the head out.
EDIT::: Del Sol, huh? You must be tiny people.
By the way, it was a hex head. Not a torx. 7/64 Allen wrench.
I'm a little guy. Only about 5' 6". If they had a tiny bassist club, I'd join it. :3 And the Del Sol isn't that small on the inside...just the outside. TONS of Leg room. More than my new Fit.
Oh, nevermind. My BassSynthWah had torx stuff on it so I just ASSumed. At 6'3" with a wide base, I've stopped looking at compact cars as any kind of option for me. Shame because some of the sport compacts can really move for chump change.
I'll never own another Del Sol. not with a D16Z6 Honda motor anyway...it wouldn't move if the motor was under 3200 RPM's.
Posting my board for the sake of posting it in this thread once.
[Invalid or Expired Link Removed]
MultiComp > Porkloin > T1M Blender > Memory Boy
MXR BOD > MicroPOG > Mastotron > GrooveRegulator > Musket > CR-7
The memory boy is 100% getting kicked off for something else now. Maybe an Aguilar TLC if I like it enough after I test it out for a bit. If I like the MXR BEF enough after I try it out it'll force me to rearrange everything or have the MicroPOG placed off the board.
[Invalid or Expired Link Removed]
MultiComp > Porkloin > T1M Blender > Memory Boy
MXR BOD > MicroPOG > Mastotron > GrooveRegulator > Musket > CR-7
The memory boy is 100% getting kicked off for something else now. Maybe an Aguilar TLC if I like it enough after I test it out for a bit. If I like the MXR BEF enough after I try it out it'll force me to rearrange everything or have the MicroPOG placed off the board.
Very cool. Yeah, the Multiwave takes some time to get things right (especially setting levels) but it really is a great tool to have in the arsenal.
Awesome board, it's a perfect fit.
Question... I'm assuming you have a Voodoo Labs pedal power? How are you powering more than 8 pedals? Are you daisy chaining off one or two pedals?
It's quite sad. I loved it since I bought it about two months ago but I guess I'm over the "delay is so fun! >_<" stage in my home noodling. I do worry though that having the MultiComp and a TLC always on would kill my dynamics.
Thanks! I try my best to take advantage of as much board space possible.
I'm using a BBE Supa Charger actually. $99 at J&R music a while ago and does what I would've need a PP2+ to do.
I'm daisy chaining the Blender, Mastotron and Memory Boy off an old 1Spot 5-way daisy. Every other pedal has it's own output, with the Groove Regulator running at 12v's off one outlet and the MicroPOG at one of the 200ma outlets.
Ahh, gotcha. So do you have the Supa Charger and 1spot mounted to a surge protector or similar underneath?
I'm in the process of doing the same because I will have 2 extra pedals so I'm trying to get a small power strip to fit under my PT junior.
Actually I'm just using the 5-way connector from the 1Spot and connecting it to one of the 9v cables that came with the BBE and connecting it all to one outlet on the BBE, instead of using the actual 1spot adapter. No power strips here.
- Status
