TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Don’t use an adaptor that has the ‘splitter’ or charging port AND 1/8” jack, just a single lightning to 1/8” is the only way I could get mine to work. And then in the main screen of the app, hit the menu on the top right and toggle the ‘switch L/R’
Bluetooth is another option that works great. I am going to put a video out on this soon.
The phone is one way communication. Unlike USB, it cannot read the settings in the pedal. It is intended to be a handy companion to the Desktop, nor quite a substitute.
Finally can be a Sorcerer! Lots of fun so far! really struggling to get a hub available or stocked anywhere. The nemesis plays so well with the h9 and the Aftershock on tube fat and the AOU for anger is an incredible combination that I have found so far. I am thinking I need the hub and a one series mod to tap into what the h9 cant do more than one of...very very happy with this gear
These 2 work for sure:
I had issues with my Hub when it was downstream in the MIDI chain from my Boss SY-300. It would freeze after some time. I changed my MIDI chain and that seems to have resolved the issues. I know that @FretNoMore also had some similar issues with the Hub. In general it wants to be early in the chain and not overloaded. If it is downstream from your Micro Clock and Croceye it might be some combination of those.
Yea hub as close to the beginning of your chain as possible, things start getting messed up when if follows other pedals. What is your midi chain currently?
I forgot to mention I also have an M-Audio 2x2 MIDI Merge in the chain so neurohub can receive PC# from Croceye, expression/midi CC# from Reflex, and MIDI clock from micro.clock.
Yea, I know when I had reflex in front of my hub, it caused issues with midi clock, which in turn caused the small one series pedals to freeze up and crash. With that much going on, I’d say your gonna have issues, I’d try using the analog expression outs only for the hub and then place the reflex after hub, maybe the merge box between hub and reflex so you can at least control reflex from either box. I’m going to try integrating a small secondary midi controller to my board, but I’m keeping it isolated from the soleman as I want to avoid duplicating midi messages to the same pedal. I know when I fed midi clock from two sources to my nemesis (the midi din connector from the soleman and the TRRS from the hub) I got double the time I wanted because of it. Though the controller I’m looking at can disable midi thru, I just don’t need it connected to the hub as it’s really to just control some features more directly and with less programming than the hub/soleman would require to do.
discouraging that it would be so hard to get these all to work together. I'm going to be hunting for more solutions to this. do you think perhaps using this in place of the midi-merge might help? Invalid Link Removed
No need. There's a Spectrum living in my C4!
Call me old fashion..but a neither a Spectrum nor a C4 is going to replace my 3Leaf Audio (analog) Chromatron envelope filter.
