Source Audio Sorcerers Society (S.A.S.S) Part 3

[stubbsonic]

There is the Neuro improvement thread. I post bugs there.

 

[Luke the Fluke]

There is usually more talk about the actual pedals and their uses in this thread. However, since the release of the Artifakt and the Neuro 3 practically at the same time, a lot have been commenting on the bugs.

That and the “how does midi work with these random selection of components” questions….

 

[johnk_10]

i'm just waiting until everything is resolved before with neuro 3 until i update it. i have a lot of SA pedals and would prefer to update them once.

 

[Annette]

Now that we are about 18 hours into the release of Neuro 3.017, its looking really good. Jesse has a couple of small items before going full pubic, but confidence is building. @Annette older Mac support is in there. If anyone want to give it a try, send me a PM with your email.

You guys are amazing! What a team! Thank you!
My Artifakt is on its way and I can't wait to dig into it!

 

[LSMFT6]

i'm just waiting until everything is resolved before with neuro 3 until i update it. i have a lot of SA pedals and would prefer to update them once.

+1, though I’m anxious to start posting some bass-specific Artifakt presets.

 

[rsmith601]

3.018 is going public tomorrow. 3.017 has been great. Only some small updates to 18. There is new Artifakt firmware in 3.018

 

[gregmon79]

Neuro 3 updated and the Artifakt is on there!! Sucks I'm at work!!

 

[lidl e]

3.018 is going public tomorrow. 3.017 has been great. Only some small updates to 18. There is new Artifakt firmware in 3.018

I'm getting virus messages on 3.0.18 on my laptop.

I tried downloading the desktop app on my phone and it got flagged as forbidden there as well.

 

[lidl e]

I used 3.0.10 recently to upload new sounds and rearange what i had loaded and now i am getting no sound from my C4.

The app sees it.

I did a factory reset, i tried to upgrade the firmware, but it is latest.

I get sound when C4 disenaged, but nothing when i engage the footswtich.

I hope i didnt brick my pedal!

Gonna try the old editor and see what happens.

Edit: desktop V2 made no difference. The app sees it and settings change in the app when i manipulate the knobs on the pedal, but no output sound when disenaged.

I opened a support ticket

 

[Gibs210]

I'm getting virus messages on 3.0.18 on my laptop.

I tried downloading the desktop app on my phone and it got flagged as forbidden there as well.

You need to click on the “…” and then click on “keep”

I used 3.0.10 recently to upload new sounds and rearange what i had loaded and now i am getting no sound from my C4.

The app sees it.

I did a factory reset, i tried to upgrade the firmware, but it is latest.

I get sound when C4 disenaged, but nothing when i engage the footswtich.

I hope i didnt brick my pedal!

Gonna try the old editor and see what happens.

Edit: desktop V2 made no difference. The app sees it and settings change in the app when i manipulate the knobs on the pedal, but no output sound when disenaged.

I opened a support ticket

You need to put it in bootloader and reload the firmware. Hold the footswitch and control input while connecting it to power. Then manually update the firmware with the file already on your computer in the source audio directory.

 

[lidl e]

You need to click on the “…” and then click on “keep”

You need to put it in bootloader and reload the firmware. Hold the footswitch and control input while connecting it to power. Then manually update the firmware with the file already on your computer in the source audio directory.

thanks! will try that this afternoon. has this been discussed alread? i only read back a few pages.

where do i DL the firmware manually? i understand the bootloader process where it will mount as a dirve, but do i need a file to drop in? where on my computer is the source audio directory?

(edit: just tried this and it doesnt mount as a drive. can you explain the bootloader process a bit more?)

on the 3.0.18 it doesn't even allow keep. it deletes it. i definitely have done that before for other files, but it seems no option for this.. will keep at it. maybe a different browser (i'm using chrome)

 

[lidl e]

i figured out the bootloader! had to DL the old version of neuro.. found the instructions on another thread.

Thanks for that! was fairly stressful in rehearsal yesterday!

FYI i also got the option to "keep" the new neuro version in MS Edge but after hitting keep, MS defender still deleted it.

I had to make an exclusion in defender to not scan my downloads folder. After that i was able to download and instal 3.0.18

Obviously if you do this, remove the exclusion afterwards

now the question is can i freely use 3.0.18 without killing my pedal again? should i wai? can i load an old backup or do i have to redo everything?

thanks for the help!

 

[rsmith601]

i figured out the bootloader! had to DL the old version of neuro.. found the instructions on another thread.

Thanks for that! was fairly stressful in rehearsal yesterday!

FYI i also got the option to "keep" the new neuro version in MS Edge but after hitting keep, MS defender still deleted it.

I had to make an exclusion in defender to not scan my downloads folder. After that i was able to download and instal 3.0.18

Obviously if you do this, remove the exclusion afterwards

now the question is can i freely use 3.0.18 without killing my pedal again? should i wai? can i load an old backup or do i have to redo everything?

thanks for the help!

I use Chrome to get around Edge's issues with Neuro. FYI

 

[lidl e]

I use Chrome to get around Edge's issues with Neuro. FYI

I had issues with both, but i got it!

So can i use 3.0.18 without issue?

I was able to load my presets from a backup file in 3.0.18

 

[bassbrad]

There is usually more talk about the actual pedals and their uses in this thread. However, since the release of the Artifakt and the Neuro 3 practically at the same time, a lot have been commenting on the bugs. And because @rsmith601 actually sees and responds so quickly to these queries, there is going to be a lot of that type of commenting. This is a great place to post that stuff because of that reason. Plus a lot of guys have knowledge and exp here. Half the time its something simple. Well, maybe not half the time

I get what you're saying. And you could start another thread. But I bet there will be a number of people that will refer you back to this thread. The nature of TB I guess.

I started a topic for the Artifakt here, hopefully one Neuro is sorted out and more folks get one there will be more discussion.

 

[bassbrad]

Well shucks, @rsmith601 and @Gibs210 I appreciate all your struggle and diligence but regretfully must report No joy on downloading Neuro 3_0_18 today. Tried 5 times on a current version of Win 10 and Chrome, got a Virus Detected message each time. I restarted my PC and had nothing running but Chrome for the last download and still rejected. I had also turned off 'safe Browsing" on the final attempt.

Invalid Link Removed

Please advise. I love my 40" screen.

 

[logdrum]

Unofficial backups of the Factory presets positions 5 - 16. Just in case you lost the presets . These are unofficial , based on my own solution that is not user friendly. Look for my username logdrum. @rsmith601 -- delete if conflicting with anything. Just a public service to those who want the official presets. Actually they are good starting and learning points as well. I learned from them a lot.

 

[lidl e]

Well shucks, @rsmith601 and @Gibs210 I appreciate all your struggle and diligence but regretfully must report No joy on downloading Neuro 3_0_18 today. Tried 5 times on a current version of Win 10 and Chrome, got a Virus Detected message each time. I restarted my PC and had nothing running but Chrome for the last download and still rejected. I had also turned off 'safe Browsing" on the final attempt.

Please advise. I love my 40" screen.

I had to add an exclusion in windows defender for my downloads folder to be able to keep it.

Had the same issue with it being seen as a virus on multiple browsers

 

[logdrum]

Well shucks, @rsmith601 and @Gibs210 I appreciate all your struggle and diligence but regretfully must report No joy on downloading Neuro 3_0_18 today. Tried 5 times on a current version of Win 10 and Chrome, got a Virus Detected message each time. I restarted my PC and had nothing running but Chrome for the last download and still rejected. I had also turned off 'safe Browsing" on the final attempt.

Please advise. I love my 40" screen.

Probably the msi was not signed properly., so that is why it is being flagged. That's a beta - maybe even alpha release though, so maybe just wait for the official release. You can force the download, but even so the install may not go properly. I also experienced the download issue and got around it but I have Visual Studio setup and I can force the OS to install it but I recommend against it.

The MacOS version is great but then during the official 3_0_17 Beta, the MacOS had issues.

 

[rsmith601]

Hi all. My daughter is visiting and I need to take the night off. Will dive back in the morning!