You could use the different types of filters in the C4 for this though and try and dial in your sound cutting the low or high frequencies. (Distortion + Filter setting)
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Source Audio Sorcerers Society (S.A.S.S) Part 3
- Thread starter gregmon79
- Start date
You could use the different types of filters in the C4 for this though and try and dial in your sound cutting the low or high frequencies. (Distortion + Filter setting)
One more question, does anyone know if this cable Invalid Link Removed
will work for a DMC Micro Pro Gen4 to my Spectrum?
Thanks,
J!
will work for a DMC Micro Pro Gen4 to my Spectrum?
Thanks,
J!
I remember early on with my Gen3, using a MIDI Box4, and going out using the neuro cable (TRS 1/4" to trs 1/8"), and that worked.
The cable you shared is basically a shortcut to what the above is, so, maybe?
But a usb-c to usb-b-mini cable might be a better choice. Or a usb-c to usb-a adaptor and the usb-a to usb-b mini cable (like what came in the box).
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
@PhatBottomBass1, Thanks for responding, and sorry for the delay getting back.
Are you using Neuro Editor to setup a mute with a footswitch function?
If you mean create a dedicated preset that would be a mute, no, I have not. That’s a very good idea.
Are you using two different Compressors with Atlas or just different settings of the same compressor on #1 & #2 channel?
That’s correct, using the same compressor settings for both channels (for now). I can tweak that later, but could use some advice on that as well.
Are you using a midi controller?
No.
This is what I tried: in the I/O Routing Menu set for Auto Detect (I’ve attached pis):
Preset 1 (for electric): in the I/O Routing Menu, under Invert Channel Phase I muted Input 2.
Preset 2. (For upright): in the I/O Routing Menu, under Invert Channel Phase I muted Input 1.
Attachments
Thanks @IronSpatula! I'll keep it really simple with the compression then.
As far as EQ and feedback, are the offending frequencies a moving target depending on the room, speaker placement, etc., or are there known frequencies for feedback? From what I've read, it's a moving target?
Let's forward this to SA...
I would expect that it would be best to have the SA Tap Tempo Switch to setup a mute function and set the switch to LATCHING MODE to switch one of the channels off when your done.
@Gibs210
Please review and respond
I just went back to the app in iOS, it must have updated the app and logged me out - won’t log back in now, just sits spinning on the login screen - is this common?
Worked like a charm! I finally have the OD sound I’ve been searching for, for decades! Thank you!
So I purchased a used C4. I updated the pedal, installed the Nuero App and dialed in a ridiculously cool Oct,gated fuzz, triple peak(4) sound.
I save the preset to the pedal and... the gated fuzz mix knob isn't on the setting that I want to save. Ugh!
I contact SA and so far we haven't been able to figure out the issue.
Honestly I'm super frustrated. I think I bought a $250 paper weight.
I save the preset to the pedal and... the gated fuzz mix knob isn't on the setting that I want to save. Ugh!
I contact SA and so far we haven't been able to figure out the issue.
Honestly I'm super frustrated. I think I bought a $250 paper weight.
I have also found that occasionally I have to unplug everything and start over again when running multiple devices or editing programs [3 I use regularly are
Neuro, Panda FI and ToneLibZoom. If I run one of my synth programs or hook up a keyboard at the same time that often discombobulates things.
rsmith601
Commercial User
- Apr 14, 2009
- 4,461
- 8,356
- Disclosures
- CEO and Co-Founder, Source Audio
There is a reason there are like 4,000 community presets for the C4. It is not a paper weight. Sometimes its only a small thing that is not being done correctly. Communicating with us directly should resolve everything. The Desktop Editor is always going to be easier than the mobile app for anything complicated. FYI
I've been using the desk top editor. It's not saving the preset correctly. I've been in contact with David. It hasn't solved anything.
So correct me if I'm wrong. If I dial in a sound and it sounds good I should be able to save that sound, correct?
So correct me if I'm wrong. If I dial in a sound and it sounds good I should be able to save that sound, correct?
Not sure if it’s protocol or not, but I always save a patch I like to my Library, edit it there, and then save it to my pedal.
Please correct me if this is wrong.
Do you have the C4's Preset Mode set to WYSIWYG ("what you see is what you get")? That makes it so the knobs actual positions are always "honored" despite the stored preset. If so, maybe turn that off?
It is not in wysisyg mode. That is one of the first things David, from SA, asked via email. I've tried everything he suggested and there hasn't been any resolution.
Last edited:
So calling my C4 a paper weight is admittedly harsh. Using the community presets is a great option.
The main issue is that I've been looking forward to tweaking some settings and dialing in sounds. I watched Zach's video along with every video on YouTube but my pedal won't accurately save any of my presets.
I guess I'll have to see what happens. It is what it is...
The main issue is that I've been looking forward to tweaking some settings and dialing in sounds. I watched Zach's video along with every video on YouTube but my pedal won't accurately save any of my presets.
I guess I'll have to see what happens. It is what it is...
You have to both save the preset into the cloud and burn it to a slot in your pedal. Each time you make changes you have to reburn the patch.
Having used other systems where pedals over wrote my patch with rubbish 5 min before show time the extra stage you have to take does make sense.
It took me a while to work out too - but The UI on Neuro3 makes it a bit clearer than it used to be.
