worshiprocker
Tonepump Junkie
- Aug 12, 2011
- 4,683
- 1,782
- Disclosures
- Endorsing Artist: Spector Basses
Regarding the Haz vs. the Tonepump. I see Donny posted my comparison clips, thanks.
The 9V Haz is just amazing.The Tonepump is a close 2nd. The Tonepump is a bit more "airy" sounding and it does have more low end and the treble gain is at a higher freq then on the Haz.
As John mentioned, I also have the trim in my Tonepump at 30% now to match the output of the Haz in my Forte and NS-2.
The Haz has tons of mid range punch and growl.
It is the big part of what makes gives the classic Spector Tone.
The Tonepump was designed to get that tone and it comes pretty close.
I did the Haz installation myself. It comes with everything you need including a new jack. No soldering needed
(See photo below)
You will need to prep the pick ups wires to get them in the post of the Haz board.
As far as the Euro pot holes. My Cherry Euro LX has 8.5mm pot holes which are just barely too small for the 9mm pot shaft of the Haz board. From what I understand its hit or miss, you may or may not need to make them bigger.
Chris, you got yourself a cool tech if he only charged you $20 for the install. nice
I made a step by step instruction sheet if anyone orders a Haz and needs it let me know.
Below is what comes from Spector when you order a New Haz
![]()
the ease of install on the haz is amazing!

