• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Spector Club (Part 2)

Status
Not open for further replies.
Here are my babies....

BTW... that's Juan Nelson's ex on the left there!

Spectors-1.jpg


SSD NS-5P '94
Kramer Spector '89
SSD NS-5FL '96
 
Hi everyone,

I plan to buy a Spector Rebop 5DLX EX
the one with the zebrawood top!

1)It's available in 2 different finish: high gloss and natural oil
DO YOU HAVE ANY PREFERENCE?

2) Are you happy with the stock electronic?

3) i think of maybe replacing the preamp by an Aguilar or a Glockenklang...

Thanks for your comments!

I also postesd this thread in the bass section but i may get more comments in the spector club!!!
 
Hi everyone,

I plan to buy a Spector Rebop 5DLX EX
the one with the zebrawood top!

1)It's available in 2 different finish: high gloss and natural oil
DO YOU HAVE ANY PREFERENCE?

2) Are you happy with the stock electronic?

3) i think of maybe replacing the preamp by an Aguilar or a Glockenklang...

Thanks for your comments!

I also postesd this thread in the bass section but i may get more comments in the spector club!!!

Hey, Francois -

The "Zeebop" is a great bass... enjoy it!

1) IMO, the oil finish gives the bass a slightly classier look. But the downside is it's more prone to dings/scratches...

2) EMG-HZ's, yes. Tone Pump pre, not as much. Sounds decent but a VERY hot pre (all boost)...

3) Any of those would be nice (a Glock pre would be pretty frickin' sweet in there, I'd imagine)!). Lots of folks have swapped for the BQC sysytem with good results, too... :cool:
 
i have rebop 5 zebrano with oil finish.

the oil finish on this spector doesnt schratch easilly

You must go to

Invalid Link Removed

they make them for Spector and send Jiryi a email.

you can order spector rebop zebrano in oil finish,emg dc pups and emg bts elecronic ( emg dc - 60 EUROS,Emg bts - 50 EUROS) and they can paint the neck joint so you will have no maple colour betwean neck and pickups but zebrano brown.
You just tell him in what country u live ,who is distributor for spector in your country and in which shop you will buy it and the bass will be in this shop in notime hehehe
Jiryi is a great guy

oil finish version wit painted neck joint(must order)
Invalid Link Removed

oil finish version no painted (standard)
[Invalid or Expired Link Removed]
 
I'm looking for a set of BLACK Schaller M4 2000's (with the "J" housing). These are the tuning machines on all the Euro Spectors (I'm not sure about the other ones..USA, etc.). I've looked EVERYWHERE for them and can not find a set to save my life. I'll trade a set of brand new gold ones (from my new Euro) or a set of standard black Schaller M4's that I had bought by mistake. Of course I'll pay cash straight up as well. If anyone can help me out, pleae PM me. Thanks all! :bassist::bassist:
 
guess you guys would know this...

does (or did) spector make a 5 string that has the PJ setup? if not, how different is the tone of the hum pups verses the PJ pups?

reason i'm asking... my dream bass would be a white spector 5 string with PJ pups - from a purely aesthetic point of view. and if i found one, i would seriously consider getting it.
 
guess you guys would know this...

does (or did) spector make a 5 string that has the PJ setup? if not, how different is the tone of the hum pups verses the PJ pups?

reason i'm asking... my dream bass would be a white spector 5 string with PJ pups - from a purely aesthetic point of view. and if i found one, i would seriously consider getting it.

They have never done a PJ on a 5-string (that I know of). I think you are limited to one or two soapbars. However, if it's the tone of the PJ's you are after, you could probably replace the EMG DC's with a 40P5 and a 40J. They won't look the same, but they will probably get closer to the tone of a PJ 4-string.

FWIW, I actually prefer the tone of the dual DC's on a 5-string. I find they are a lot more smooth and punchy than the PJ's.
 
They have never done a PJ on a 5-string (that I know of). I think you are limited to one or two soapbars. However, if it's the tone of the PJ's you are after, you could probably replace the EMG DC's with a 40P5 and a 40J. They won't look the same, but they will probably get closer to the tone of a PJ 4-string.

FWIW, I actually prefer the tone of the dual DC's on a 5-string. I find they are a lot more smooth and punchy than the PJ's.

good to know. but i also really like the looks of the PJ setup. shame they don't do it for 5ers
 
Hi everyone,

I plan to buy a Spector Rebop 5DLX EX
the one with the zebrawood top!

1)It's available in 2 different finish: high gloss and natural oil
DO YOU HAVE ANY PREFERENCE?

I have a Gloss Finish 4-string and prefer it due to the protection and lack of upkeep an oil/wax-based finish requires, but if someone were to offer me a "ZeBop" 5-string in Oil I'd hardly turn it down because of the finish! I don't it matters all that much and comes down to your personal preference.

2) Are you happy with the stock electronic?

I don't "hate" the TonePump nearly as much as a good amount of owners do (and you'd be getting the newer "TonePump Jr." in which you can turn down the overall gain via an Internal Trimpot... which is the vast source of complaints, that it's far too "hot" a preamp) but I do plan on upgrading all of my Spectors ("ZeBop" DLX EX 4-string, ReBop DLX FM 5-string fretted and fretless) to Aguilar OBP-3SK/PPs, mainly for having onboard control of my midrange which I prefer.

3) i think of maybe replacing the preamp by an Aguilar or a Glockenklang...

I'd suggest getting the bass and playing it for a while before making any decision. The boost-only TonePump Jr. is basically the same as an Aguilar OBP-1, which was originally the ReBop's preamp until Spector came out with their TonePump.

guess you guys would know this...

does (or did) spector make a 5 string that has the PJ setup? if not, how different is the tone of the hum pups verses the PJ pups?

I'm sure Spector would do so for a USA-build, but the cost-vs.-quality of one compared to a Euro (which many of us believe isn't worth the extra 3-4K) in which, as mentioned, you can get P and J-pickups in Soapbar housings that are drop-in replacements for the Euro's pups in EMGs as well as other manufactures makes for a hard argument for the USA unless you're pretty independently wealthy. ;)
 
Status
Not open for further replies.

Latest posts