The Mini P's scale is about 1 1/2" shorter than "short scale".
While there are some strings out there that may tolerate having part of their wound section wrapped around the tuning post, many will not.
the mini P is the same 28.6" scale as the ibanez mikro. the difference is that on the mikro you can use standard short scale strings with no wrap on the tuners, but using the same strings the mini has wrap on the E tuning peg. btw, i used d'addario nickel round 40-95s, and the E wrapped around the tuning peg with no issues. that being said, i've never had wrap on the tuners of any bass or guitar i've played before.
Has anyone had the nut out yet?
On some designs, the nut is properly in the slot with just a little weak glue in place.
Other times, they get carried away and make it hard to get the slot out.
Anyone know? Have you had the nut out? I'm contemplating a graphite nut, but only if the stock one comes out without a nuclear explosion.
we took the nut off mine. it had more glue under the nut than i've ever seen - it took a little extra effort to carefully pry the nut out, the slot wasn't cut correctly - it had a "step" going from side to side, so my husband levelled it. we could do that because he made a new nut. the nut slot required a lot of cleanup before the new nut could be put in. my husband sanded the original nut a little narrower, then put very fine sandpaper on it, used it to clean up the slot, then finished up with a razor blade.
[That's as close to a duck as I could find on short notice.]
