• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Tricked Out Squier Club Part 3

I'm about to reassemble a squire p I just refinished and I'm using a spb3 and all new pots and wiring. Looking and p bass wiring, all there is for ground is the bridge and jack wires but the squire has several different grounds going to the jack and to the pots, why is this? Helps with keeping it quiet? I've rebuilt several basses and never did any kind of shielding and I have no noise issues

It depends on the kind of pickups and what kind of shielding. You always need good grounds. But if you have shielding tape on your pick guard and shielding tape or paint in your cavity then you don't need to shield your pots. P bass style split coil pickup can be humcanceling. So noise issues are not really an issue. For single coil pickups you need to ground and shield your bass properly. It's basic electronics really. And a guitar is real basic electronics.
 
It counts if you post pictures
ImageUploadedByTalkBass1406556001.190981.jpg
ImageUploadedByTalkBass1406556011.694998.jpg



It's a tort pick guard but kind of hard to tell!
 
Here's my Vintage Modified PJ Humbucker. It's got Quarter Pounders for the PJ and a Dimarzio Model One for the Humbucker. I also have an Ultralite Extender on there and plan to replace the other three tuners with ultralites as well. The pickguard is from Warmoth and puts the P pickup in the "sweet spot."

0728141851.jpg


0728141851a.jpg
 
Last edited:
Here's my Vintage Modified PJ Humbucker. It's got Quarter Pounders for the PJ and a Dimarzio Model One for the Humbucker. I also have an Ultralite Extender on there and plan to replace the other three tuners with ultralites as well. The pickguard is from Warmoth and puts the P pickup in the "sweet spot."



Could you try to post your images again. I can't see nothing but the gallery code and I'm dying to see your bass.
 
Here's my Vintage Modified PJ Humbucker. It's got Quarter Pounders for the PJ and a Dimarzio Model One for the Humbucker. I also have an Ultralite Extender on there and plan to replace the other three tuners with ultralites as well. The pickguard is from Warmoth and puts the P pickup in the "sweet spot."

Please post details about the wiring/controls ;) I'm thinking about adding the Model One to a jazz.