Would this be the correct cable to use with the Cioks DC5?
Voodoo Lab Current Doubler Adapter - 4" Str-Str Y Doubler
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Voodoo Lab Current Doubler Adapter - 4" Str-Str Y Doubler
Here is my pedal board everything runs off 12v which is what I wanted. Plus I finally found knobs that are better than the stock ones. Not perfect but much better.
Please share a link of where I can get a set of those replacement knobs, they are great!
10PCS Black Potentiometer and Encoder Plastic Knob Half Round Shaft Knob For | eBay
They come in packs of 10 so I bought two sets
I hope this helps
They come in packs of 10 so I bought two sets
I hope this helps
Last edited:
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
Hey all. I have a Le bass and love the tone I get through head phones but sound seems to open up with amp and cab. The head is a Markbass 250 into a Fearful 1212/6/1 also run a Taurus tux in front. I know the amp is lacking, would I benefit from just going into a power amp or another bass amp like the quilter 800. My basses are all Ibanez rb800s if that matters. Thanks for any input!!
The Quilter works really well with full range cabs like the Fearful because of the HPF effect of the Depth control. Cutting this allows you to use the bass controls on the Le Bass to give you a full sound without swamping the low end.
I run mine through a Little Mark III + 2x10 with the cabsim on through the Le Basses DI out, then compensate with a strange eq on the head (lots of bass cut extra hi's) The cabsim is a bit dark but still sounds better then without it unless i'm playing really clean.
You mentioned that these new knobs are not quite perfect.
My guess is perhaps that they do not cover all the way down the pot shaft like the originals do?
Please elaborate. Thanks!
They are a drop short but that isn't a issue I'm mostly referring to the visibility in low light. My compressore is easier to read in low light and while I hardly ever mess with the compressore's settings I do tweak the Le Bass durning gigs.
Hey Charlie when are you using the torpedo? Just for recording or part of your live setup. Thanks DaveThe CS7 is a fantastic power supply for Le Bass and my other pedals.
As my live cabinets are full-range, flat-response (FRFR) I use the Torpedo CAB in line as the last effect in my chain. Going this route usually ensures that my on stage tone is the same as FOH.
Cheers!
Last edited:
OK, I'm in need of a DI/preamp and have had my eye of the Le Bass for several weeks now. I mostly need a clean sound from the Le Bass, but am a bit concerned about not having the mid control on channel A. Does the pedal have enough headroom to get a clean sound while running through channel B only?
Is it a DI to front of house or is there further EQ with an amp?
The A channel on its own is just lovely and gives a fantastic sound, don't worry about the lack of mid, just worry about how fat and warm your sound could sound, or how dirty it can get
The A channel on its own is just lovely and gives a fantastic sound, don't worry about the lack of mid, just worry about how fat and warm your sound could sound, or how dirty it can get
Yes but it sounds better IMO mixed in with the extra bottom from channel A in Cold Fusion mode.
