• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

U.S. Peavey Club

I play with the worship team at church on Sunday mornings. I usually use one of my Roscoe basses but yesterday I used my Forum passive P/J. I had only played it out of my house one time in the past. I took it to a blues/rock jam session and one of the guys there tried to buy it from me when he heard the bass. Instead of selling it I helped him find a nice older Fury and he is very happy with it.

At church I used the Forum into a Mesa D-800 and one Aguilar GS112. I have TI flats on that bass and it is set up with almost no relief and the action is excellent. It sounded heavenly. These basses are rare (only made for two years) and so overlooked. The Forum Plus replaced this model and the plus has active PU's similar to EMG's but the tone is not as good as the passive version IMO. The passive P/J bridge PU is a Jazz S/S humbucker. There is no hum issue with these basses.

IMG-3424.jpg


There is a black one on Reverb right now.

Peavey Forum 4 String Black | Reverb
 
I play with the worship team at church on Sunday mornings. I usually use one of my Roscoe basses but yesterday I used my Forum passive P/J. I had only played it out of my house one time in the past. I took it to a blues/rock jam session and one of the guys there tried to buy it from me when he heard the bass. Instead of selling it I helped him find a nice older Fury and he is very happy with it.

At church I used the Forum into a Mesa D-800 and one Aguilar GS112. I have TI flats on that bass and it is set up with almost no relief and the action is excellent. It sounded heavenly. These basses are rare (only made for two years) and so overlooked. The Forum Plus replaced this model and the plus has active PU's similar to EMG's but the tone is not as good as the passive version IMO. The passive P/J bridge PU is a Jazz S/S humbucker. There is no hum issue with these basses.

IMG-3424.jpg


There is a black one on Reverb right now.

Peavey Forum 4 String Black | Reverb
Yeah, that's part of the big collection that is being sold, which was highlighted here a couple weeks ago. It's about a four hour drive for me. If it were 2 1/2 years (5 basses) ago, I'd make the drive to check out all those nice Peaveys.

Here's another beauty that I just can't justify buying:
[Invalid or Expired Link Removed]
For when the link dies:
Screenshot_20221121-204455_Brave.jpg
 
Finally got the neck attached
Friend helps with routing and doing all the work

Emg preamp
Stock pickups but was thinking swapping out at some point

due to moving the neck pocket a bit it pickup place might be tight I
Wanted to use my big singles but it might be a bit to large for the pickup positions (neck now being closer to pickup)

was thinking Delano pickups?

A1CE9B3A-E018-428D-BC5E-B23CC3DFF199.png
958B65F7-C176-4574-A8A9-58ABC86D48DF.jpeg
671FC563-6DA2-462D-8E49-DF2764D6DA93.jpeg
139EAD0C-4C24-4EDC-9EA8-7424860C0ADD.jpeg
 
Last edited:
I play with the worship team at church on Sunday mornings. I usually use one of my Roscoe basses but yesterday I used my Forum passive P/J. I had only played it out of my house one time in the past. I took it to a blues/rock jam session and one of the guys there tried to buy it from me when he heard the bass. Instead of selling it I helped him find a nice older Fury and he is very happy with it.

At church I used the Forum into a Mesa D-800 and one Aguilar GS112. I have TI flats on that bass and it is set up with almost no relief and the action is excellent. It sounded heavenly. These basses are rare (only made for two years) and so overlooked. The Forum Plus replaced this model and the plus has active PU's similar to EMG's but the tone is not as good as the passive version IMO. The passive P/J bridge PU is a Jazz S/S humbucker. There is no hum issue with these basses.

IMG-3424.jpg


There is a black one on Reverb right now.

Peavey Forum 4 String Black | Reverb
My metallic green Forum Plus started life stock: active pickups and a high mass bridge. The bridge was great, but those Peavey EMG-style actives were not great sounding to me. VERY hot (actually overly hot) and the EQ curve wasn't "EMG" enough for me to tolerate them. Once replaced with a Wilde P46/J45L set and a series/parallel switch for the P46, the tone matched up to it's playability. It set up like a dream, and it nails a passive P tone, P/J blend and does a decent fake of J and SCPB when in parallel mode. It was my go-to passive 4 string for the 80s cover band, along with the active 5 du jour. Those two basses nailed all the tones necessary to play the songs.
 
  • Like
Reactions: xsogol
GAS will strike at the most unexpected times and without warning...!
It's funny, I was just thinking to myself yesterday that, if I acquire one more Peavey for the stable, it would be an '87 Mahogany Patriot, which I would have it routed for a single coil SF at the neck (RicRiot), slanted SF in the P middle position and a single coil SF in the Foundation bridge position with a six way selector switch...
 
It's funny, I was just thinking to myself yesterday that, if I acquire one more Peavey for the stable, it would be an '87 Mahogany Patriot, which I would have it routed for a single coil SF at the neck (RicRiot), slanted SF in the P middle position and a single coil SF in the Foundation bridge position with a six way selector switch...
Would you put a different neck on it to make it a 32" scale bass?
Do you have all 32" scale basses at this point?
 
  • Like
Reactions: xsogol
IMG_1379.jpg
After getting the 83 T20,been trying to get strings low the way I prefer. Was going to shim the neck,but the neck screws will not budge? The original saddles screws were stripped. So got new saddles so could set the intonation. Noticed the neck had a forward bow,got the 5/16" wrench today,and tightened about 1/4 turn,and it is getting the forward bow out little at a time. Strings are low now,where I prefer. Also found an original case with the lining still clean and still in place. Patience is the key,and I have none! LOL
 

Attachments

  • IMG_1376.jpg
    IMG_1376.jpg
    725.8 KB · Views: 21
  • IMG_1378.jpg
    IMG_1378.jpg
    829.6 KB · Views: 25
Last edited:
View attachment 4882816 After getting the 83 T20,been trying to get strings low the way I prefer. Was going to shim the neck,but the neck screws will not budge? The original saddles screws were stripped. So got new saddles so could set the intonation. Noticed the neck had a forward bow,got the 5/16" wrench today,and tightened about 1/4 turn,and it is getting the forward bow out little at a time. Strings are low now,where I prefer. Also found an original case with the lining still clean and still in place. Patience is the key,and I have none! LOL
View attachment 4882816 After getting the 83 T20,been trying to get strings low the way I prefer. Was going to shim the neck,but the neck screws will not budge? The original saddles screws were stripped. So got new saddles so could set the intonation. Noticed the neck had a forward bow,got the 5/16" wrench today,and tightened about 1/4 turn,and it is getting the forward bow out little at a time. Strings are low now,where I prefer. Also found an original case with the lining still clean and still in place. Patience is the key,and I have none! LOL

That looks really sharp! I love it!
 
  • Like
Reactions: Chrome Dome